A procedure for measuring the flexibility of single wood-pulp fibres

A way of determining the flexibility of wood-pulp fibres is developed, which involves i) a precise measurement of the topology of single-fibres by using a confocal laser scanning microscope and ii) the measurement of the elastic modulus of the fibres by using a single-fibre fatigue cell. Reported in this paper are the initial results of tests carried out on black spruce fibres, which have been subjected to three different levels of mechanical refining energy, namely ∼1100, 2300, and 3500 kWh/t. It is found that the fibre flexibility rises significantly between the first and second energy levels, but it does not change to the same degree between the second and third ones. The described procedure of measuring the flexibility of fibres may be used to establish the appropriate refiner energy necessary for the production of a specific grade of paper. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 1, pp. 115–128, January–February, 2006.     

鲁米诺-双氧水-铬(Ⅲ)化学发光体系测定化探样品中痕量砷

用鲁米诺－双氧水－铬（Ⅲ）化学发光体系结合巯基棉对Ａｓ（Ⅲ）的富集分离，建立了快速的测定化探样品中痕量砷的新方法，检测线性范围为１．０×１０－４～１．０×１０１ｍｇ／Ｌ，检出限为３．４×１０－５ｍｇ／Ｌ。用于实际化探样品测定，相对标准偏差为５．５％～９．０％。     

The Influence of Cobalt (II) in Carboxymethyl Cellulose Processing

Controlling the reduction in molecular weight of the cellulose chains is essential in the production of carboxymethyl cellulose (CMC). Such a reduction can be achieved by the addition of cobalt during the process of cobalt(II) ions, which act as a catalyst for oxidative cleavage, and the influence thereof has been studied under a variety of conditions. This study has resulted in a model that summarises the effects of the added amount of cobalt, the time for the cobalt reaction, the temperature in the mercerisation stage of the CMC-manufacturing process and finally the effect of the temperature in the etherification stage. It is shown that it is important for cobalt to be present during the mercerisation stage in order to achieve the desired viscosity.     

INTROMISSION OF WATER-REPELLENT AND HYDROSCOPIC PROPERTIES SIMULTANEOUSLY TO PP BY PLASMA DISCHARGE METHOD

Plasma-induced surface graft copolymerization of acrylic acid on polypropylene non-woven fabric (PP-g-AA) and polypropylene membrane were reported. The extents of grafting were controlled by the plasma and polymerization condition. Hexadecyltrimethyl ammonium bromide was then coupled with the carboxyl group of PP-g-AA to obtain a polyion complex (PIC). At last, CF4 plasma was used to give PICs hydrophobic property. The moisture regain and water-repellency of the processed PICs was investigated. The surfaces were characterized using ATR FT-IR and XPS. The result indicates that the products have very high ability to adsorb moisture, even better than cotton fiber. At the same time, the products show excellent hydrophobic property, which can‘t be wetted by those reagents whose surface tensions were higher than 327mN/m.     

Microgels and ionic associations in solutions of cellulose diacetate

Solutions of cellulose diacetate (CDA) from two sources (cotton linters and wood pulp Floranier) were analysed in various solvents by size exclusion chromatography (SEC). Without special precautions, the SEC chromatograms presented three peaks — or prehumps — before the main polymer peak. The first prehump which could be eliminated by ultracentrifugation corresponded to microgels whose sugar composition was determined. These microgels were also investigated by electron microscopy, X-ray and electron diffraction analysis. They corresponded mainly to cellulose triacetate (CTA-II) in the case of CDA from cotton linters and a mixture of CTA-II and xylan diacetate (XDA) in the case of CDA from the wood pulp Floranier. The second and third prehumps could be attributed to ionic effects corresponding to the association of remaining sulfate groups on the CDA molecules with residual calcium. It was found that these ionic effects could be eliminated by the addition of LiBr or LiCl to the elution solvents. This led to chromatograms devoid of prehumps.Presented in part at the Cellulose '91 meeting in New Orleans.     

The characteristic fragment ions and visualization of cationic starches on pulp fiber using ToF‐SIMS

Time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) was used to investigate the distribution of cationic starch on pulp fiber. To identify the characteristic fragment ions of the cationic starches, deuterium‐labeled cationic starches were prepared and analyzed using ToF‐SIMS. The starch 2‐hydroxypropyltrimethylammonium chloride derivative generated characteristic fragments at m/z 58 and 59, which were identified as [H₂C?N(CH₃)₂]⁺ and [N(CH₃)₃]^+·, respectively. The fragmentation patterns were also suggested. From the imaging analysis, the adsorption of the cationic starch on fibers was uneven on individual fibers, as well as between fibers. This may have been on account of fiber morphology and structure. On examining scanning electron microscope (SEM) images, the quaternary ammonium starch derivative (QS) did not penetrate the fiber. No migration of cationic starch was observed under various drying conditions. Copyright © 2007 John Wiley & Sons, Ltd.     

Characterization of Carbohydrates in Paper and Paper Pulps Using Anion Exchange Chromatography and Principal Component Analysis

In the course of this investigation, a method for the characterization and differentiation of paper pulps was developed. After hydrolyzation of the papers and the respective raw pulps with trifluoroacetic acid, the hydrolyzates were analyzed with respect to their carbohydrate composition using ion exchange chromatography. The variations in carbohydrate composition mainly arise from the various hemicelluloses of the papers and pulps. The chromatographic results were then further processed using principal component analysis which allows correlating the various papers to different pulp materials.     

Xylanolytic enzyme production by anAspergillus niger isolate

Production of xylanolytic enzymes by anAspergillus niger CCMI 850 isolate was investigated in batch cultures. The effect of the composition of a fermentation medium that did not include chemical inducers, on β-xylanase, β-xylosidase, α-l-arabinofuranosidase, and total cellulase activity was studied. With 4% xylan as the carbon source, about 65 U/mL of β-xylanase was obtained, whereas the total cellulase activity was undetectable, under the specified conditions. This β-xylanase activity represents the highest reported for a wild-type strain ofA. niger. The effect of pH and temperature on the activity of β-xylanase was studied. Partial characterization of the β-xylanase showed that with insoluble birchwood as substrate theK _m andV _max were 0.3 mM and 19 μmol/min, respectively. Aspects of using the crude β-xylanase preparation for applications in the pulp and paper industry were discussed.     

Characterization of the supermolecular structure of cellulose in wood pulp fibres

The hierarchic organization of cellulose fibrils (microfibrils) was investigated in holocellulose, sulphite pulp and kraft pulp using TEM, XRD, ED and FTIR. There were remarkable differences in both the fibril structure and fibril aggregation between the samples. TEM observations revealed more intimately associated fibrils in the kraft pulp compared to the sulphite pulp and the holocellulose, results in agreement with previous CP/MAS ¹³C-NMR data [Hult E.-L. et al. (2002) Holzforschung 56: 231–234]. Furthermore, the cellulose crystallinity was higher in the kraft pulp sample. With respect to the cellulose I and I allomorphs, these samples were controversial when different analytical techniques were applied. Due to the small fibril size and the low degree of order of cellulose in these samples, the concept of crystalline triclinic and monoclinic components as determined by diffraction analysis may not be adequate. Instead the fibril can be regarded to have different degrees of lateral order (including paracrystalline ordering) that can be reoriented to I type conformation and packing upon pulping.     

棉花三系配套的研究

利用棉花杂种优势,是提高产量和改进纤维品质的有效途径。推广杂种棉的关键措施是进行三系配套,实行不育化制种。我们于1985年以哈型雄性不育材料为不育“源”,以北疆推广品种“新陆早一号”和“66—241”为回交亲本,进行回交转育。经过三年的回交和定向选择,现已基本育成不育性稳定的,农艺性状接近回交亲本的四个新的雄性不育系。1987年,开始了恢复系的转育工作,并取得一定的研究结果。同时对不育系的自然授粉也进行了初步的研究,发现不育系对野蜂有某种吸引力,因而有较高的单株成铃数;这对制种工作是十分有利的。