Design of a sector bowtie nano-rectenna for optical power and infrared detection

We designed a sector bowtie nanoantenna integrated with a rectifier (Au−TiO_x−Ti diode) for collecting infrared energy. The optical performance of the metallic bowtie nanoantenna was numerically investigated at infrared frequencies (5−30 μm) using three-dimensional frequency-domain electromagnetic field calculation software based on the finite element method. The simulation results indicate that the resonance wavelength and local field enhancement are greatly affected by the shape and size of the bowtie nanoantenna, as well as the relative permittivity and conductivity of the dielectric layer. The output current of the rectified nano-rectenna is substantially at nanoampere magnitude with an electric field intensity of 1 V/m. Moreover, the power conversion efficiency for devices with three different substrates illustrates that a substrate with a larger refractive index yields a higher efficiency and longer infrared response wavelength. Consequently, the optimized structure can provide theoretical support for the design of novel optical rectennas and fabrication of optoelectronic devices.     

直接出射白光的新型发光二极管

介绍了实现出射白光发光二极管的几种方法,包括波长转化产生白光,多有源区级联合成白光以及单个有源区直接出射白光.并从芯片结构、材料选取、白光形成机理以及器件性能等四个方面对这几种方法进行了分析比较.最后指出了实现直接出射白光的发光二极管存在的问题及今后的研究重点.     

O_2/CO_2气氛下焦炭氮转化的实验研究

利用热重-傅里叶红外联用(TG-FTIR)的方法对O2/CO2和O2/Ar气氛下大同煤焦燃烧过程中焦炭氮的转化进行了实验研究.结果表明,两种气氛下煤焦燃烧过程中焦炭氮会转化为HCN、HNCO、N2O等.与O2/Ar气氛下的实验结果相比,O2/CO2气氛下焦炭氮的转化时间延长,含氮气体产物的质量分数也存在差异.热解制焦温...     

光参量过程中的逆转换问题

逆转换是影响光参量变换转换效率、参量光光束质量以及参量光输出稳定性的关键因素,随光斑分布和时间变化,逆转换现象很难消除.文中分析了光参量变换过程中的逆转换问题,研究了影响逆转换的关键因素.分析得出,适当的晶体长度、优化的抽运光斑截面类型、合适的谐振腔参数(对于振荡器)有利于降低逆转换,提高参量转换效率,改善参量光光束质量.根据理论分析结果,设计了脉冲砷酸钛氧钾(KTA)光参量振荡器,实验获得了270 mJ信号光和150 mJ闲频光输出,有效地抑制了逆转换的影响,参量转化效率达到了43%. 关键词： 逆转换 光参量放大 光参量振荡     

高功率毫米波圆波导TM01—TE11模式变换分析

 在数值研究高功率毫米波TM₀₁—TE₁₁光滑弯曲圆波导模式变换的基础上，对弯曲波导的几何结构进行了优化分析。在模式耦合理论的基础上，优化出了比较好的几何结构，并发现了圆波导半径、弯曲圆波导曲率和频率以及频带宽度之间的变化规律。以此数据设计的模式变换器的转换效率可达99%，带宽超过29.8%。     

Precise Radiometry: Some Recent Aspects of Fruitful Interaction with Atomic Physics

Modern radiometric analytics demands a complex consideration of nuclear and electron shell processes, if more pretentious aims are envisaged. As an example the small variation of decay rates of radionuclides presents possibilities for information on chemical situations of decaying atoms. In principle this phenomenon is well known since many years, but now the situation is such that, e.g. in ^99mTc internal conversion, a full agreement of the difficult experiments and the respective theory was established. The secondary emission of X-rays as a consequence of high excitation of electron shells in combination with nuclear transitions supplies another example for a methodical progress of radiometry. Investigations on ⁵¹Cr as an electron capture nuclide have shown that chemically induced variations of the K_α to K_β X-ray intensity ratio is at least qualitatively understood.     

电纺ZnO纳米纤维电子传输层提高倒置PTB7∶PC70BM电池效率

研究利用静电纺丝制备的不同直径ZnO纳米纤维作为倒置结构有机太阳能电池的电子传输层对器件转化效率的影响。首先通过静电纺丝技术成功制备了半径在43～110 nm之间的ZnO纳米纤维,然后将ZnO纳米纤维作为电子传输层加入到倒置结构有机太阳能电池（ITO/ZnO∶ZnO nanofiber/PTB7∶PC₇₀BM/MoO₃/Al）。与平面结构的ZnO电子传输层相比,ZnO纳米纤维具有比表面积大等优点,增加了电子传输和抽取能力,提高了器件的光电转化效率。实验发现ZnO纳米纤维的直径越小,电池效率越大。当ZnO纳米纤维直径为(46±5)nm,接收时间为30 s时,作为电子传输层的电池效率提高了8%。     

弹光调制光电转换放大电路设计

弹光调制干涉具调制的干涉光被探测器接收后输出高速变化的微弱电信号,能否将该电信号提取并放大输出对弹光调制-傅里叶变换光谱仪的研制至关重要。通过对调制干涉光进行理论分析,设计一种具有高信噪比和较高带宽的光电转换放大电路,主要由电源电路、光电转换电路、放大电路、理论通频带为100 kHz~3.5 MHz的带通滤波电路组成。实验结果表明:设计的电路能够将探测器输出的最大频率为1.6 MHz的信号放大至670 mV左右,实现了将探测器输出的微弱速变电信号从背景噪声中有效提取与放大,为后续傅里叶变换提供可靠数据。     

In-beam spectroscopy of 253, 254No

In-beam conversion electron spectroscopy experiments have been performed on the transfermium nuclei ^{253, 254}No using the conversion electron spectrometer SACRED in nearly collinear geometry in conjunction with the gas-filled separator RITU at the University of Jyv?skyl?. The experimental setup is discussed and the spectra are compared to Monte Carlo simulations. The implications for the ground-state configuration of ²⁵³No are discussed. Received: 21 March 2002 / Accepted: 16 May 2002 / Published online: 31 October 2002 RID="a" ID="a"e-mail: rdh@ns.ph.liv.ac.uk RID="b" ID="b"Present address: GANIL, F-14021 Caen, France. RID="c" ID="c"Permanent address: IReS Strasbourg, IN2P3-CNRS, F-67037-Strasbourg, France. RID="d" ID="d"Present address: CEA/DIF DCRE/SDE/LDN F-91680 Bruyeres-le-Chatel. RID="e" ID="e"Present address: Daresbury Laboratory, Daresbury WA4 4AD, UK. RID="f" ID="f"Permanent address: IPN Lyon, IN2P3-CNRS, F-69037 Lyon, France.     

Mössbauer Study of Thin Iron Film Beryllization

Beryllium coating of the iron foil is made by means of magnetron sputtering. Mössbauer studies are performed by means of two registration techniques: conversion electron Mössbauer spectroscopy (CEMS) and the γ-ray technique in absorption geometry. Performed investigations confirm the original thermodynamic approach to creation of thermally stable multi-layer materials.