论公路建设项目中的成本管理

探讨了公路建设项目成本管理中遇到的问题,分析了产生这些问题的原因,提出了相应的措施,总结了项目管理的经验。     

三维光盘存储系统中双光头同步控制的频域分析与辨识

详细介绍了双光头同步控制原理.对采集的伺服模块聚焦误差跟踪信号及共焦模块读写光头的聚焦线圈驱动信号进行了频域分析,并以此两路信号作为系统输入输出,分别对三种参数模型进行参数优化.根据3种模型的频率响应及阶跃响应,选择双光头同步控制过程的参数模型为[450]阶的ARX模型.实测曲线与模型仿真结果符合度(fit)为78.0259%.     

建设工程的安全监理

解释了建设工程安全监理的概念,指出了建设工程应建立健全的安全监理管理体系,就建工企业如何建立健全各项安全监理的措施进行了探讨。     

Robust Speed Control of a Low Damped Electromechanical System Based on CRONE Control: Application to a Four Mass Experimental Test Bench

Robust speed control of a low damped electromechanical system with backlash is studied, controlled load angular speed being not measured. The proposed control strategy combines a Luenberger observer (load angular speed and load torque disturbance estimations) and a robust CRONE controller. The observer provides estimation of the load angular speed and of the disturbance torque applied on the load. Through the computation of only three independent parameters (as many as a PID controller), the CRONE controller permits to ensure the robust speed control of the load in spite of plant parametric variations and speed observation errors. The proposed control strategy is applied to a four mass experimental test bench.     

Preparation and characterization of acrylic‐based black particles of poly(methyl methacrylate‐co‐ethylene glycol dimethacrylate) by dispersion polymerization for electrophoretic displays

Ultrafine black particles, ranging in diameter from 1 to 3 μm, were prepared by dispersion polymerization in a methanol/water mixture with vinyl monomers, nonpolymerizable Sudan black B dyes, and fluorescein isothiocyanate labeled charge control additives. Both the ratio of the methanol to the water dispersion medium and the polymeric stabilizer concentration had significant effects on the particle size. The important role of the stabilizer concentration lay in the particle formation step, during which it determined the particle stability and final particle size. These could affect the extent of the aggregation of nuclei by changing the adsorption rate of the stabilizer and the viscosity of the dispersion medium, resulting in smaller particles. The fluorescent‐labeled charge control additives strongly affected the electrophoretic mobility. A small concentration of fluorescent‐labeled charge control additives increased the electrophoretic mobility. However, a further addition reduced the electrophoretic mobility of the polymer particles. The concentration dependence of the fluorescent‐labeled charge control additives on the deposition behavior in the polymer particles was successfully imaged and thereafter quantified by image analysis. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5608–5616, 2004     

On weak spreadability of distributed-parameter systems and its achievement via linear--quadratic control techniques

In this paper, the concept of weak spreadability is introduced.It constitutes an extension of the idea developed by El Jai& Kassara. In the case of linear distributed systems weconsider quadratic control techniques with a conveniently penalizedcriterion which makes the system weakly spreadable. The approachis outlined for a convection—diffusion system, and theresults of a numerical study are also included to illustratethe main features of the considered problem.     

CMW1型外铲磨机PC控制及应用

研究铲磨机各种运动和控制要求，设计出继电控制与ＰＣ控制相结合的电气控制系统。此系统在电路设计、电气柜安装、调试维修和操作等方面满足了设计要求。铲磨加工过程的ＰＣ控制解决了转轮流道三维表面成形运动的控制难题。ＰＣ控制程序基本满足了铲磨工艺要求。     

Vibrational control of crystal growth from liquid phase

Modeling and numerical simulations of the convective flows induced by the vibration of the monocrystal during crystal growth have been performed for two configurations simulating the Cz and FZ methods. This permitted to emphasize the role of different vibrational mechanisms in the formation of the average flows. It is shown that an appropriate combination of these mechanisms can be used to counteract the usual convective flows (buoyancy- and/or thermocapillary-driven) inherent to crystal growth processes from the liquid phase. While vibrational convection is rather complex due to these identified mechanisms, the new modeling used in the present paper opens up very promising perspectives to efficiently control heat and mass transfer during real industrial applications of crystal growth from the liquid phase.     

W-算子在设计电气传动控制系统中的应用

本文利用作者最近提出的一种新的算子方法——W-算子方法,从理论和应用方面探讨了电气传动控制系统的设计问题,并对算法的收敛性进行了分析。该算法具有结构简单,算法严密,计算方便的特点,避免了实际应用中用传统最优控制方法设计所带来的困难。     

基于PC的电机云母槽自动下刻机测控系统的设计

采用工业用计算机实现自动下刻电机云母槽测控系统的设计方法.在加工工艺允许的情况下,系统采用接触式的检测方法能降低成本,提高可靠性,并提高其自动化的水平.在软件设计上,系统由找槽控制算法和下刻深度算法双闭环控制组成,槽控制算法与下刻深度算法之间相互切换直到加工完电机的所有槽.