Rapid Sample Pretreatment,Identification and Determination of Active Constitutents in Water‐soluble Radix isatidis Extract via MAE,ESI‐MS and RODWs‐HPLC

In this study, we successfully studied water‐soluble extract from Radix isatidis. Optimized conditions of MAE were listed, the sample can be extracted completely in 10 minutes under microwave power of 400W and solid/liquid ratio of 1:80. Active compounds in water‐soluble extract from R. isatidis were identified with HPLC‐DAD/ESI‐MS, these compounds followed by cytidine, uridine, guanosine, (R,S)‐goitrin and adenosine. RODWs–HPLC as a new sensitive chromatography were also first proposed and investigated, we favoringly used this method for simultaneous determination of these active constitutents in water‐soluble R. isatidis extract. Chromatographic separation was performed on a Diamonsil C18 column (5 μm, 150 mm × 4.6 mm) with a mobile phase gradient consisting of methanol and water at a flow‐rate of 1.0 mL/min, detection wavelengths 240, 250, 260 and 270 nm, the retention times of the tested five compounds were about 4.2, 5.8, 11.1, 14.2 and 20.8 min respectively, the limits of detection were 15, 12, 20, 5.8 and 24 ng/mL for cytidine, uridine, guanosine, (R,S)‐goitrin and adenosine respectively, their linear ranges were between 0.045 and 350 μg/mL with correlation coefficient (R) of 0.9998‐0.9999. The relative standard deviations (RSDs) of intra‐day and inter‐day assays were 0.30‐2.36% and 0.86‐2.54% respectively. Extraction recoveries were 94.25‐106.21%. This novel analytical method was shown to be simple, low‐cost, sensitive and reliable for multiple components in complex or undeveloped materials via MAE, ESI‐MS and RODWs‐HPLC.     

Determination of Vitamin D3 and 25-Hydroxyvitamin D3 Using Liquid Chromatography with Amperometric Detection

Abstract

The electrochemical behaviour of vitamin D₃ and 25-hydroxyvitamin D₃ (25-OH D₃) in a high performance liquid chromatography system using amperometric detection is described. Separation is carried out using a C18 reversed-phase column and the optimum mobile phase was a 0.1 M LiClO₄ solution in methanol-water (97:3, v/v) at a flow rate of 1.25 ml/min. 25-OH D₃ and vitamin D₃ were eluted with good resolution at retention times of 3 and 6 minutes respectively, and determined by amperometric detection with a glassy carbon electrode at + 1.050 V (vs Ag/AgCl). Calibration graphs for both substances showed good linearity when amounts of vitamin D₃ between 18 and 312 ng and 27 and 412 ng of 25-OH D₃ were injected. Detection limits of 8 ng (vitamin D₃) and 25 ng (25-OH D₃); relative standard deviations of 3.2% (vitamin D₃) and 5.8% (25-OH D₃) were obtained.     

LED光诱导化学发光法检测饮料中的核黄素

以化学发光法为基础,建立了以发光二极管(LED)诱导化学发光体系(LED-CL)检测饮料中核黄素含量的分析方法。样品溶液与鲁米诺溶液混合后由蠕动泵带出,经LED灯照射后产生化学发光,产生的化学发光信号由光电检测器检测。核黄素浓度检测线性范围为0.39~79.56μg/L(R≥0.999 7),加标回收率为99.3%~103%,可用于饮料中核黄素的检测。     

基于偶氮水杨醛酰腙的氰根比色检测探针的合成及性能

设计合成了一种基于酚羟基和氨基的酰腙类探针分子, 利用紫外-可见吸收光谱和核磁滴定考察了其对F^-, Cl^-, Br^-, I^-, CH₃COO^-, H₂PO₄^-, HSO₄^-, ClO₄^-, CN^-, SCN^-, SO^2-₄和NO^-₃等阴离子的识别作用. 结果表明, 当加入CN^-离子时主体溶液颜色由无色变为黄色, 而加入其它离子时主体溶液颜色不变, 说明该探针在DMSO/H₂O(体积比5: 5)体系中能选择性裸眼比色检测CN^-. 核磁滴定及质谱数据表明, 该探针与CN^-以1:1化学计量比结合, 该过程通过亲核加成方式完成.     

离子色谱脉冲安培法测定蜂蜜中的葡萄糖、果糖、蔗糖

利用离子色谱脉冲安培检测器对蜂蜜中葡萄糖、果糖、蔗糖的测定方法进行了研究。采用CARBOPAC^TM PAl分离柱和脉冲安培检测器,对淋洗分离条件进行了实验,选择50mmol/L NaOH作淋洗液,可使蜂蜜中的葡萄糖、果糖、蔗糖很好地分离。检出限分别为：葡萄糖2μg/kg,果糖2μg/kg,蔗糖5μg/kg。加标回收率为90％－108％。该方法只需简单的前处理、无基体干扰,分离效果好,测定准确率高,适用于蜂蜜中葡萄糖、果糖、蔗糖的测定。     

复方维生素B片中主要成分的高效毛细管电泳电化学法检测

采用高效毛细管电泳－电化学检测法同时测定复方维生素B片中的主要成分维生素B1，B12，B6和C的含量；研究了电极电位，运行缓冲溶液的浓度和酸度，电泳电压和进样时间等对电泳的影响，以微铂电极为工作电极，检测电位＋0．5V（vs SCE)，在pH9.0的15mmol/L Tris-1mmol/L H3BO3缓冲溶液中，上述4组分在5min内获得基线分离；维生素B1，B12，B6和C的线性范围分别为2．1mg/L-1.0g/L,6.0mg/L-0.80g/L,1.4mg/L-0.72g/L和0．97mg/L-0.44g/L检出限分别为0．50mg/L,1.0mg/L,,0.65mg/L和0．40mg/L；5次测定峰高的相对标准偏差分别为2．4％，3．0％，3．1％，和2．5％，5次测定的平均回收率分别为99％，102％，98％和100％。     

液相色谱紫外法测定鸡肉中三种硝基咪唑残留量

建立了测定鸡肉中二甲硝咪唑、罗硝唑、甲硝唑残留量的方法。以二氯甲烷提取,硅胶固相萃取净化,液相色谱紫外法检测。样品添加１０μｇ／ｋｇ,５０μｇ／ｋｇ,平均回收率为７８％～９１％,相对标准偏差为６．４％～１０．１％。     

液相色谱荧光衍生法在糖类物质分析中的应用

介绍了目前在液相色谱荧光衍生法分析糖类物质中常用的几类荧光衍生试剂及相应的衍生方法,对近期糖类物质分离分析中的液相色谱荧光检测方法做了系统综述。引用文献60篇。     

几种无机阳离子的毛细管电泳-电容耦合非接触电导分离检测

研制出电容耦合非接触电导检测器,检测器使用两个5 mm长的管状电极套在分离毛细管的外面,电极相距2 mm并与函数信号发生器连接。对影响检测器检测限和线性范围的激发频率、峰峰电压(V p-p )等因素进行了考察,结果发现频率为25～35 kHz、V p-p 在30 V时检测器有最佳的信号噪声比;以2-N-吗啡啉乙磺酸(MES)-组氨酸(His)为缓冲体系,用自制的检测器对Li+,Na+,K+,Mg 2+ ,Ca 2+ 和Ba 2+ 等几种常见的无机离子进行了毛细管电泳分离检测,优化了缓冲溶液     

光纤生物传感器用于核酸的特异性检测

为了利用光纤传感器实现对细菌核酸分子的特异性和相对快速检测，我们使用直径1mm的石英光纤和635nm激光二极管，利用倏逝波原理制作了光纤生物传感器。光纤经过处理后产生醛基化基团，然后与核酸分子进行共价结合。通过3个实验来验证传感器的特异性和灵敏度。蒌光素溶液直接检测，使用互补模式寡核苷酸分子（25mer)进行核酸杂交模式实验和设计嗜肺军团菌一段特异性探针一 光标记嗜肺军团菌染色体DNA杂交。结果表明：光纤检测荧光素的灵敏度可达0.01mmol/L，而生物芯片扫描仪最低可检测到1nmol/L的荧光素；模式寡 核苷酸杂交表明：光纤传感器可以特异地检出目的核酸分子，灵敏度可达纳克级水平；染色体杂交结果显示在正常检测浓度下，光纤检测军团菌之信噪比达到了6：1，同时具有较好的特异性。检测时间约需要3－4h。我们构建的光纤生物传感器可以用于核酸分子的特异性检测，并且具有较好的灵敏度，对光纤表面修饰、样品处理和杂交过程的优化可望使之应用于实际标本的检测。