轮拱罩充满率对整车气动特性的影响

针对某种小型轿车,基于计算流体力学(CFD)方法研究了不同轮拱罩充满率时旋转车轮对整车气动特性的影响,并与现有理想模型的试验结果对比.结果表明:在其他参数不变的情况下,随着轮拱罩充满率的下降,整车阻力系数上升,升力系数下降,当充满率下降27%时,阻力系数上升接近20%,升力系数下降接近30%.阻力上升主要是由于轮拱罩中的气流量增加,并且受轮拱罩结构的影响,内部流动分离加剧,导致尾流区的涡量均上升,车辆背压下降;升力下降主要是因为下车身气流速度加快,导致下车身压力减小.     

香菇菌汤煮制工艺优化及其非挥发性特征风味物质研究

通过单因素实验和正交试验以感官评定及固形物溶出率为评价指标对香菇菌汤煮制工艺进行优化,并采用高效液相色谱技术对煮制后香菇及汤液中非挥发性特征风味物质进行测定。结果表明,当煮制温度为120℃、煮制时间为45min、香菇质量浓度为0.050g/mL时,香菇菌汤感官评价及固形物溶出率较好。在煮制过程中,香菇中风味物质逐渐向汤液中转移,使得汤液中可溶性糖醇、有机酸、呈味核苷酸等非挥发性风味物质含量显著高于煮制后香菇中含量。除此之外,在煮制后汤液中,特征性风味氨基酸含量也显著高于煮制后香菇中含量。但是,与新鲜香菇相比风味氨基酸在煮制后汤液及香菇中绝大多数含量有所降低。     

面向产品投产比例的多Hoist调度研究

在电镀生产线上,多种不同类型的工件往往按照一定的比例关系组织生产,以应对多样化的订单需求,缩短订单交付周期,而为了克服由运输设备造成的生产瓶颈,加工设备之间的工件转运作业多采用数个自动化的Hoist(行车)来完成。针对面向产品投产比例的多Hoist调度问题,采用启发式策略实现多个不同类型工件在并行工作站上的分配,同时考虑工件加工时间窗口约束、工作站的使用能力约束以及Hoist无碰撞约束,构建了解决此类问题的混合整数规划模型。最后,以某印刷电路板制造企业的全板电镀生产实例验证了所建数学模型的实际应用价值。     

降低OFDM系统复杂度的改进SLM算法

为了降低正交频分复用(OFDM)系统中传统选择性映射(SLM)算法的计算复杂度,提高系统的频谱利用效率,提出了基于转换向量(conversion vectors)与随机筛选序列(random selection sequences)相结合的选择性映射(CR-SLM)算法.CR-SLM算法是将原始信号序列等分,然后对于数据序列的前半部分与转换向量相乘进行循环卷积,对于数据序列后半部分进行随机序列筛选,筛选出最优序列.最后将两部分输出序列合并生成候选序列,筛选出最优序列进行传输.仿真结果表明:CR-SLM算法在保持与传统SLM 算法PAPR性能相近的情况下,较大幅度降低了计算复杂度.     

永磁同步电机直接转矩控制新型占空比调制策略

针对传统永磁同步电机直接转矩控制系统转矩脉动和磁链脉动较大,现有占空比调制策略计算复杂等问题,提出一种新型占空比调制策略.该调制策略利用定子磁链和扇区电压矢量的作用角区分转矩脉动和磁链脉动在控制系统中的权重系数,并设计新型开关表,保证在任一控制周期中最佳电压矢量的选择.在保证系统计算量较低的前提下,利用权重系数和最佳电压矢量推导最优占空比计算公式.仿真和实验结果证明,所提出的新型占空比调制策略可以大幅度抑制转矩脉动和磁链脉动,获得较好的稳态运行性能,并保持系统快速动态响应性能.     

Kinetic energy decomposition scheme based on information theory

We proposed a novel kinetic energy decomposition analysis based on information theory. Since the Hirshfeld partitioning for electron densities can be formulated in terms of Kullback–Leibler information deficiency in information theory, a similar partitioning for kinetic energy densities was newly proposed. The numerical assessments confirm that the current kinetic energy decomposition scheme provides reasonable chemical pictures for ionic and covalent molecules, and can also estimate atomic energies using a correction with viral ratios.     

Effect of external pressure on the Kβ/Kα X-ray intensity ratios of 3d metals

The occupation numbers of the 3d transition metals are calculated as a function of pressure by means of the linear muffin-tin-orbital method. This data is used with the multiconfiguration Dirac-Fock (MCDF) X-ray intensity ratios (R) to estimate the variation of the intensity ratios of 3d metals with pressure. It is found that R decreases with pressure for the early 3d metals whereas it increases for the heavier 3d transition metals.     

A new method for the determination of the 34S/32S ratio of water-soluble sulphur in soil

A new method for the determination of the ³⁴S/³²S ratio of water-extractable sulphate in soil is described. Soils are extracted directly with deionized water, which is evaporated down. The remaining residue is then rehydrated and transferred to tin cups containing an adsorbent and mixed with an oxygen donor (V₂O₅). Samples are then analysed using a continuous flow isotope ratio mass spectrometer. The new method requires around 10?g soil per determination, compared to much larger amounts (up to kilograms) of soil required for the previous methods. Sample preparation and subsequent analysis is quick and efficient. The method is demonstrated using a number of soils collected from around the world to provide a range of determined δ³⁴S values. The δ³⁴S values of water-extractable sulphur were broadly similar to those of the soil total sulphur.     

Analysis of the geometrical dependence of auxetic behavior in reentrant structures by finite elements

Materials with a negative Poisson's ratio(PR)are called auxetics;they are characterized by expansion/contraction when tensioned/compressed.Given this counterintuitive behavior,they present very particular characteristics and mechanical behavior.Geometrical models have been developed to justify and artificiall reproduce such materials' auxetic behavior.The focus of this study is the exploration of a reentrant model by analyzing the variation in the PR of reentrant structures as a function of geometrical and base material parameters.It is shown that,even in the presence of protruding ribs,there may not be auxetic behavior,and this depends on the geometry of each reentrant structure.Values determined for these parameters can be helpful as approximate reference data in the design and fabrication of auxetic lattices using reentrant geometries.     

Convergence of m-bonacci ‘golden ratios’

This paper proves that the ratios of consecutive terms of the m-bonacci sequence converge to a limit φ_m < 2 and, as m → ∞, these φ_m converge to 2. Further, it is shown that the generating functions for the m-bonacci sequences converge pointwise to the geometric series.