YDHC-10催化剂用于不饱和植物油脂肪酸氢化工艺条件的研究

采用自制的催化剂YDHC-10对氢化工艺条件进行了研究。找出了植物油脂肪酸氢化时,氢化压力2MPa、氢化温度180-200℃、氢化时间60min以及催化剂浓度对植物油脂肪酸氢化的影响．     

Photocatalytic Organic Syntheses: Selective Cyclization of Amino Acids in Aqueous Suspensions

Photocatalytic reactions occurring at semiconductor particles/solution interfaces can be applied to organic syntheses. In this review article, examples of photocatalytic syntheses of cyclic amino acids by suspended semiconductor particles, e.g., titanium(IV) oxide or cadmium(II) sulfide are introduced and interpreted. Different from the photocatalytic decomposition of pollutants under aerobic conditions, selective conversion of organic compounds can be driven by the photocatalytic reactions under deaerated conditions.     

Seeded Polymerization of an Amide-Functionalized Diketopyrrolopyrrole Dye in Aqueous Media

The self-assembly of an amide-functionalized dithienyldiketopyrrolopyrrole (DPP) dye in aqueous media was achieved through seed-initiated supramolecular polymerization. Temperature- and time-dependent studies showed that the spontaneous polymerization of the DPP derivative was temporally delayed upon cooling the monomer solution in a methanol/water mixture. Theoretical calculations revealed that an amide-functionalized DPP derivative adopts an energetically favorable folded conformation in the presence of water molecules due to hydration. This conformational change is most likely responsible for the trapping of monomers in the initial stage of the cooperative supramolecular polymerization in aqueous media. However, the monomeric species can selectively interact with externally added fragmented aggregates as seeds through concerted π-stacking and hydrogen-bonding interactions. Consequently, the time course of the supramolecular polymerization and the morphology of the aggregated state can be controlled, and one-dimensional fibers that exhibit a J-aggregate-like bathochromically shifted absorption band can be obtained.     

以天然矿物为全部硅铝源低成本绿色合成ZSM-5分子筛的研究

ZSM-5分子筛被广泛地应用于催化、吸附分离、离子交换和绿色化工等领域,但目前其合成主要是以无机化学品为硅铝源,从源头来看是非绿色化的过程.我们以热活化的硅藻土和亚熔盐活化的累托土为全部硅铝源,通过调变两种矿物的加入比例调变合成体系的硅铝比,在水热合成体系中制备ZSM-5分子筛.系统地考察模板剂用量、碱度、投料硅铝比、晶化时间等合成条件对产物结构和性质的影响,并对在最优条件下合成的ZSM-5分子筛的物化性质进行了详细地表征,结果表明：以天然矿物为全部硅铝源可以合成出具有较高结晶度、晶粒尺寸约为4 μm的六面体挛晶形貌的ZSM-5分子筛,该分子筛比商业ZSM-5分子筛具有更高的水热稳定性和更优的加氢异构性能.     

Pt/MOx(M=Ni,Fe,Co,Ce)催化剂上CO氧化反应中抗H2O与CO2的性能研究

我们研究了4种负载型Pt催化剂（1Pt/NiO、1Pt/FeO_x、1Pt/Co₃O₄和Pt/CeO₂）上不同反应条件下CO氧化活性及抗H₂O和CO₂性能.发现反应气氛中CO₂的加入与CO形成了竞争吸附,并在催化剂表面形成了碳酸盐物种堵塞了活性位,从而导致催化剂失活.反应气氛中H₂O的加入对1Pt/CeO₂催化剂的活性有所抑制,但对1Pt/FeO_x、1Pt/NiO和1Pt/Co₃O₄催化剂的活性却有促进作用.在1Pt/FeO_x和1Pt/CeO₂催化剂上的分步反应实验和动力学研究表明,尽管H₂O的加入在两种催化剂上均与CO形成了竞争吸附,但在1Pt/FeO_x催化剂上H₂O在载体表面解离形成的羟基更易与CO反应,开辟了新的反应途径,从而提高了反应性能.此外,H₂O的加入能有效分解该催化剂上的碳酸盐物种,从而保持了其稳定性.     

亚硝酰硫酸的离子色谱分析方法研究

建立了离子色谱法(IC)测定亚硝酰硫酸含量的分析方法。考察了亚硝酰硫酸选择性水解生成硝酸和硫酸的条件。亚硝酰硫酸的最佳色谱分析条件为:电导检测器,pH3.5的磷酸二氢钾缓冲溶液作流动相,流速1 mL.min-1,柱温45℃。在优化实验条件下,NO2-、NO3-和SO42-的线性范围分别为2.375~9.515、0.375~1.548、2.051~8.263 mmol.L-1,相关系数均大于0.999 9。样品中NO2-、NO3-和SO24-的加标回收率为99%~101%,其相对标准偏差(RSD)均小于1.0%。通过对各离子含量的测定,用氮平衡法计算出亚硝酰硫酸的含量,相对标准偏差均在0.1%以内。建立的方法与传统的氧化还原滴定法分析亚硝酰硫酸相比,具有分析结果准确、简便快速、成本低的特点,已用于工厂中该产品的质量控制。     

改性累托石吸附水溶液中苯酚的研究I吸附条件的确定

用十二烷基二甲基苄基氯化铵 (1227)、十六烷基三甲基溴化铵 (1631)、十八烷基三甲基溴化铵 (1831) 3种表面活性剂改性天然累托石 (REC) 粘土,分别得到3种有机改性累托石:1227-REC、1631-REC和1831-REC。用有机改性累托石作吸附剂,对水溶液中的苯酚进行吸附研究,考察了pH值、吸附时间、吸附剂用量、温度等因素对吸附效果的影响。结果发现,在本文研究条件下,3种吸附剂对苯酚达到较理想吸附效果的合理条件是:pH值分别为6、8、8;吸附平衡时间分别需要90、20、40min;吸附剂用量均为20g/L;常温。在确定的合理条件下,去除率分别能达到66.2%、99.0%、99.8%。     

Xanthan sulfuric acid: An efficient and biodegradable solid acid catalyst for the synthesis of bis(indolyl)methanes under solvent-free conditions

Xanthan sulfuric acid (XSA) is found to be an efficient catalyst for the electrophilic substitution reaction of indole with aromatic aldehydes to afford the corresponding bis(indolyl)methanes at room temperature under solvent-free conditions. The catalyst was characterized for the first time with the help of powder XRD, SEM–EDX and DSC–TGA. The attractive features of this green, new methodology are excellent yield of products, clean reaction profile, reusability of the catalyst, energy sustainable protocol, simple experimental and easier work-up procedures.     

A New,Mild, and Rapid Transformation of Acylals to Bisulfites in One-Pot Synthesis by Bismuth (III) Nitrate Pentahydrate

Abstract

Direct conversion of acylals to the corresponding bisulfites can be easily performed in the presence of bismuth (III) nitrate pentahydrate in ethanol at room temperature in good yields.     

An efficient green procedure for the synthesis of chalcones using C-200 as solid support under grinding conditions

Abstract

A simple, rapid, efficient and environmentally benign procedure for the synthesis of chalcones has been achieved by grinding aryl aldehydes and acetophenones with anhydrous barium hydroxide (C-200) in the absence of any solvent. The use of organic solvent for extraction of compound is also avoided. This present method is highly useful for the synthesis of 2′-hydroxy chalcones, required intermediates for the synthesis of flavanoids.