钢管砼拱桥施工监控项目分析

论述了钢管混凝土拱桥施工监控的目的、原则及内容。介绍了主要监控项目及测试内容，给出了监控实施工作流程。     

金属工件内部残余应力的振动消除研究

本文针对传统的消除金属工作内部残余应力的热时效处理法的不足，从激振角度，运用材料力学、动力学中的振动理论等知识，并通过大量试验验证，研究了振动消除应力的方法－－振动时效法的原理及其有关问题。说明这种新的方法具有节能、高效等一系列优点。     

韧性金属裂纹尖端损伤区内应变场测量——数字散斑相关法应用

本文用数字散斑相关方法测量了五种不同幂硬化指数韧性金属材料(铝和铜),双边裂纹尖端细观区域内应变场.对所得结果用韧性损伤模型进行了分析.在此法中以金属自然表面结构为散斑场,不同加载状态的散斑场进行比较,得到相对变形与应变.图象之间相关性 C 是变形参数或是位移及其导数的泛函.使其相关性 C 取最大值的试凑变形即为其真实变形场.这一方法在细观测量中应用得到满意的结果.     

对煤矿岩体中固流耦合效应问题研究的探讨

本文对固流耦合效应的基本概念、基本原理进行了简单介绍。并对采动影响下邻近煤层、岩层的瓦斯向本层采空区的流动规律,以及煤和瓦斯突出的机理和发生的理论,分别作为固流耦合效应的两类不同问题进行了研究.同时提出了今后进行进一步研究的看法。     

切削刀具倒棱刃口挤压力的理论计算

根据试验观察．揭出了刀具刃口带负倒棱时的切削模型。在此模型中,刀具刃口 存在一个“金属死区”。以新模型为基础．采用能量法,对高温、高应变率下刀具刃 口的挤压力进行了理论计算。所做工作的特点是：１）在材料变形分析中计入了挤压 层金属绕过刀具刃口时的过剩变形;２）进行有关材料变形与物理特性的计算时,考 虑了温度与应变率的影响。利用新研制的压电式切削测力仪进行验证试验,其结果表 明,理论计算值与实测数据较好一致。     

圆形隧洞周边位移和地层压力预报的简便公式

应用本文所提出的公式可计算地层的初始应力和由开挖引起的洞周位移。预报公式所需要的计算数据是一组相邻测点之间的量测位移,这可通过隧洞的施工监控量测而得到。在推导这些预报公式时,著者先应用一系列的有限元和无限元等数值计算方法来模拟洞室的开挖,从而得到大量的“观测数据”。然后综合应用自动回归和解析方法,建立了实用的计算公式。这些公式使用简便且具有良好的精度。     

Magnetic phase transitions in nanostructures induced by shear stress under high pressure

Magnetic phase transitions of the first and second order were revealed by Mössbauer spectroscopy in nanosystems of - and -ferric oxides and metallic europium subjected to shear stress (240°) under high pressure (20 kbar). For - and -ferric oxide nanoclusters, the Curie (Neel) points decreased to 300 K, whereas for nanostructured europium the Neel point increased from 90 to 100 K. The thermodynamic model of magnetic phase transitions predicting a change in the character of magnetic phase transitions and a decrease (increase) in the critical Neel (Curie) points in nanoclusters was developed. The type of magnetic phase transitions and the change in the critical points were caused by defects in nanoclusters, whose maximum concentration was observed for the clusters with the 20—50 nm size range.     

PA菌毛株菌苗的应用研究

结合国内外近年来生物科学领域中的迅速进展以及个人多年研究多种菌毛株的经验,作者于1984年建成一株“绿脓杆菌MSHA菌毛株”。本菌毛株具有跨菌属的广谱免疫原性。使用此新型菌毛株,1985年制成“绿脓杆菌MSHA菌毛株菌苗”(简称PA菌毛株菌苗)。经基础实验研究、动物实验、志愿者人体验证及临床试用,均获得良好效应。     

Diastereoselective addition of organolithiums to 1,3-oxazolidines complexed with aluminum tris(2,6-diphenylphenoxide) (ATPH)

1,3-Oxazolidines were easily obtained by condensation of N-substituted (R)-phenylglycinol with aldehydes. Addition of organolithium reagents to 1,3-oxazolidines by complexation with the bulky Lewis acid aluminum tris(2,6-diphenylphenoxide) (ATPH) readily produced the corresponding chiral amines with good yield and high diastereoselectivity. The configuration of the new stereogenic center was shown to be opposite to that of adducts obtained for the same 1,3-oxazolidines using Grignard reagents. The best diastereoselectivity was achieved using N-isopropyl-1,3-oxazolidines. The mechanism of addition was deduced by determining the stereochemistry of the iminium-aluminum complex by NOE experiments.     

Residual stress and deformation during rapid cooling process in an epoxy plate

Residual stress in the epoxy plate during a rapid cooling process was measured by the layer removal method and calculated by the linear thermoviscoelastic theory considering specific volume relaxation. The relaxations of the tensile modulus and specific volume were measured by an Instron thermomechanical analyzer. When the starting temperature of the cooling process was near the glass transition temperature of the cured epoxy, the residual stress in the epoxy plate was smaller than when the starting temperature was higher than the glass transition temperature. However, the transient stress in the cured epoxy plate was higher when the starting temperature was near the glass transition temperature than when the starting temperature was higher than the glass transition temperature. The quenched epoxy plate was compressed in the direction parallel to the surface and expanded in the thickness direction.