硫化镉纳米荧光探针荧光猝灭法测定痕量铜

制备了无机纳米溶胶CdS，研究了纳米粒子的大小和荧光性质，以该纳米粒子为探针，建立了荧光猝灭法测定铜离子的新方法。该方法已成功用于人发样品测定，方法简单，快速，选择性好，灵敏度高，在最佳实验条件下，测定铜离子的线性区间为2．0－24．0μg/L，检出限为0．23μg/L。     

酯交换法合成碳酸二苯酯用氧化铅－氧化锌催化剂的研究

 制备了一种用于苯酚与碳酸二甲酯酯交换合成碳酸二苯酯的新型氧化铅－氧化锌多相催化剂．研究了制备方法、焙烧温度、不同母体和母体配比对催化剂催化性能的影响．应用XRD，TPR和原子吸收光谱对催化剂结构进行了表征，发现Pb3O4是主活性物相，ZnO为助催化剂，并以非晶态或微晶态存在于催化剂体系中．当焙烧温度为500℃，n（Pb）／n（Zn）≈2时，催化剂的活性最高，碳酸二苯酯产率可达45．6％．考察了催化剂的重复使用效果，并对失活原因进行了探讨．     

硫酸氢铵分解动力学及其分解机理的研究

为了筛选适合的化学贮能系统,Wentworth等人曾提出了十项筛选标准。照此标准衡量,硫酸氢铵的分解-合成反应是一个十分理想的贮能系统: NH_4HSO_4(l)?NH_3(g)+H_2(g)+SO_3(g)Prengle也曾就此反应应用于太阳能电站贮能系统的可行性作过理论上的探讨.但是,有关该反应的基础研究进行的还很不够,特别有关分解动力学和分解机理的研究文献尚未见报导。本文用等温热重法和程序升温热重法对硫酸氢铵的热分解动力学进行了研究,并确定了分解机理,为贮能系统的实际应用提供了基础数据。     

乙醇-盐-水-5-Br-PADAP体系萃取分离测定钯

研究了在硫酸铵存在下 ,5 Br PADAP乙醇体系中Pd(Ⅱ )、Rh(Ⅲ )、Pt(Ⅳ )的萃取行为及乙醇溶液的分相条件 ,讨论了影响萃取率的各种因素 ,试验表明 ,室温下 ,一定 pH范围内 ,该体系中的Pd(Ⅱ )几乎可完全被乙醇相萃取 ,而Rh(Ⅲ )、Pt(Ⅳ )不被萃取或萃取率很低 ,从而可实现Pd(Ⅱ )、Rh(Ⅲ )、Pt(Ⅳ )混合离子的定量分离 ,同时建立了Pd(Ⅱ )的测定方法。乙醇相中Pd(Ⅱ ) 5 Br PADAP配合物表观摩尔吸光系数为 1.18× 10 5L·mol- 1·cm- 1,钯量在 0～ 9.6 0 μg/10ml范围内符合比耳定律 ,检出限为 0 .0 90 μg/10ml。用该法分离混合样和测定两种活性碳钯催化剂中钯 ,结果满意     

Growth Mechanism of Large Monodispersed Silica Particles Prepared from Tetraethoxysilane in the Presence of Sodium Dodecyl Sulfate

Monodispersed silica particles up to ca. 1.2 μm in diameter were prepared by hydrolysis of tetraethoxysilane in the presence of sodium dodecyl sulfate (SDS). The particle size was increased with an increase of SDS added. The geometrical standard deviation of the particles was decreased with an increase of SDS. In the earlier reaction stage, double spherical particles by the coalescence of the particles were frequently observed when large amounts of SDS were added. Particle size was gradually increased after the coalescence occurred and spherical particles were finally obtained. The results of Nielsen’s chronomal analysis suggest that the polynuclear layer growth took place after the coalescence of the particles in the presence of larger amount of SDS.     

Low Dimension Semiconducting Composite Nanomaterials

Recently, low dimension nanostructures have gained considerable attention due to their technological potential as unique types of nanoscale building blocks for future optoelectronic devices and systems. Semiconducting composite nanomaterials, which can combine the advantages of two or more components, have been the focus in the area of nanomaterials synthesis and device application.In this paper, we report our work on the preparation of composite nanomaterials based on CNTs.CNTs were coated by organic or inorganic species via novel and facile methods (Fig. 1 and Fig.2).These functional CNTs based composites show eminent prospects and opportunities for new applications in a wide variation of areas.     

Tribological properties of ormosil coatings

Transparent plastics are not scratch resistant. The damage leads to a loss of optical properties. Coatings prepared using either tetraethoxysilane or colloidal silica particles embedded in glymo is a way to avoid these disadvantages. Tribological experiments are carried out to better understand the surface modification due to a sliding friction. It is shown that the wear track is not directly related to usual mechanical properties such as Young's modulus and the hardness of the coating. The different stages leading to material loss are discussed in term of particle removal and debris circulation (accumulation or elimination) through the friction track. The mechanical properties of the film combined with the film to substrate adhesion are expected to play an important role as it can be deduced from results obtained as a function of the coating composition.     

A scratch-resistant single-layer antireflective coating by a low temperature sol-gel route

A novel quarterwave-thick narrow-bandwidth antireflective coating has been developed for both plastic and vitreous substrates by a sol-gel route. This coating has revealed pronounced scratch- and climatic-resistance under adverse conditions. The single-layer coating consists basically of a composite material made of silica as the discontinuous phase and of a polytetrafluoroethylene-derived (Teflon¹) organic polymer as the continuous phase. This leads to fluorine-containing colloidal silica product, or a so-called Flucosil coating. The coating is applied by spinning or dipping from specific solutions at room temperature followed by a mild and short heat treatment. In addition to remarkable abrasion and environmental resistance properties, such coatings have displayed excellent laser-induced damage threshold levels, surpassing uncoated substrates.We hope such a product might open new perspectives concerning household articles, architectural optical thin-films, ophthalmic uses, and so on.     

球形SiO2-Al2O3的制备、结构和性能

将Na2SiO3·9H2O 溶液通过强酸性阳离子树脂进行离子交换得到酸性硅溶胶,再将硅溶胶与铝溶胶及六次甲基四胺混合后采用油柱成型法制备了球形SiO2-Al2O3复合氧化物. 通过XRD、BET 及TPD等手段对样品进行测试和表征, 结果表明, 600 ℃焙烧得到的SiO2-Al2O3中SiO2以无定型形式存在, 其比表面、孔容与表面酸性随SiO2含量的增加而提高, 孔径、堆密度随SiO2含量的提高而减小, 压碎强度基本保持不变.     

典型无机含氧酸自由基的特性

碳酸自由基、硝酸自由基、磷酸自由基和硫酸自由基是化学反应的重要中间体，都具有氧化性，对污染物在自然和人为环境中的迁移转化会产生重要的影响.文中较为详细地介绍这几种自由基的电极电位、产生方式、检测方法及与有机物的反应方式.总结四种自由基的特性及与有机物的反应方式可发现，四种自由基和羟自由基电极电位不同，导致它们和有机物反应速率的不同；碳酸自由基并不是羟自由基去除剂，对于一些容易被氧化的化合物，碳酸自由基氧化效果比羟自由基好；四种自由基均可由羟自由基转化而来，并且这四种自由基和羟自由基与有机物反应方式基本一致，都通过电子转移、夺氢和加成的方式进行.可以预测四种自由基和羟自由基降解有机物的机理将非常相似，今后应研究四种自由基与羟自由基相互转化的规律，以及与代表性有机物的反应机理.