高体分SiC_p/Al复合材料螺纹性能的测试

从SiCp/Al复合材料性能分析着手,讨论了预置件法、焊接法和粘接法等在空间遥感器研制中常用的联接方法的优缺点,提出了在高体积分数(体分)SiCp/Al复合材料上直接加工螺纹,并加装钢丝螺套的方法来改善螺纹联接性能。对在某高体分SiCp/Al复合材料上加工的M4、M5螺纹进行了拉伸测试,结果表明:加装钢丝螺套前,复合材料螺纹有被拉脱现象;加装钢丝螺套后,M4螺纹、螺杆在3 000～4 000 N被拉断;M5螺纹、螺杆在8 000～9 000 N被拉断,测试后两种规格的螺纹状态良好,可以满足实际应用对该材料拉伸强度的要求,其已应用于工程项目中。     

Temperature and magnetic field responsive hyaluronic acid particles with tunable physical and chemical properties

We report the preparation and characterization of thiolated-temperature-responsive hyaluronic acid-cysteamine-N-isopropyl acrylamide (HA-CYs-NIPAm) particles and thiolated-magnetic-responsive hyaluronic acid (HA-Fe-CYs) particles. Linear hyaluronic acid (HA) crosslinked with divinyl sulfone as HA particles was prepared using a water-in-oil micro emulsion system which were then oxidized HA-O with NaIO₄ to develop aldehyde groups on the particle surface_. HA-O hydrogel particles were then reacted with cysteamine (CYs) which interacted with aldehydes on the HA surface to form HA particles with cysteamine (HA-CYs) functionality on the surface. HA-CYs particles were further exposed to radical polymerization with NIPAm to obtain temperature responsive HA-CYs-NIPAm hydrogel particles. To acquire magnetic field responsive HA composites, magnetic iron particles were included in HA to form HA-Fe during HA particle preparation. HA-Fe hydrogel particles were also chemically modified. The prepared HA-CYs-NIPAm demonstrated temperature dependent size variations and phase transition temperature. HA-CYs-NIPAm and HA-Fe-CYs particles can be used as drug delivery vehicles. Sulfamethoxazole (SMZ), an antibacterial drug, was used as a model drug for temperature-induced release studies from these particles.     

Nonlinear properties of the lattice network-based nonlinear CRLH transmission lines

The nonlinear properties of lattice network-based(LNB) composite right-/left-handed transmission lines(CRLH TLs)with nonlinear capacitors are experimentally investigated.Harmonic generation,subharmonic generation,and parametric excitation are clearly observed in an unbalanced LNB CRLH TL separately.While the balanced design of the novel nonlinear TL shows that the subharmonic generation and parametric processes can be suppressed,and almost the same power level of the higher harmonics can be achieved over a wide bandwidth range,which are difficult to find in conventional CRLH TLs.     

Ultralow detection limit of giant magnetoresistance biosensor using Fe_3O_4–graphene composite nanoparticle label

A special Fe_3O_4nanoparticles–graphene(Fe_3O_4–GN) composite as a magnetic label was employed for biodetection using giant magnetoresistance(GMR) sensors with a Wheatstone bridge. The Fe_3O_4–GN composite exhibits a strong ferromagnetic behavior with the saturation magnetization M_S of approximately 48 emu/g, coercivity H_C of 200 Oe, and remanence M_r of 8.3 emu/g, leading to a large magnetic fringing field. However, the Fe_3O_4 nanoparticles do not aggregate together, which can be attributed to the pinning and separating effects of graphene sheet to the magnetic particles. The Fe_3O_4–GN composite is especially suitable for biodetection as a promising magnetic label since it combines two advantages of large fringing field and no aggregation. As a result, the concentration x dependence of voltage difference |?V| between detecting and reference sensors undergoes the relationship of |?V| = 240.5 lgx + 515.2 with an ultralow detection limit of 10 ng/mL(very close to the calculated limit of 7 ng/mL) and a wide detection range of 4 orders.     

An efficient continuous-wave YVO_4/Nd:YVO_4/YVO_4 self-Raman laser pumped by a wavelength-locked 878.9 nm laser diode

We report an efficient continuous-wave self-Raman laser at 1176 nm based on a 20-mm-long composite YVO_4/Nd:YVO_4/YVO_4 crystal and pumped by a wavelength-locked 878.9 nm diode laser.A maximum output power of 5.3 W is achieved at a pump power of 26 W,corresponding to an optical conversion efficiency of 20%and a slope efficiency of 21%.The Raman threshold for the diode pump power was only 0.92 W.The results reveal that in-band pumping by a wavelength-locked diode laser significantly enhances output power and efficiency of self-Raman lasers by virtue of improved pump absorption and relieved thermal loading.     

Ultrasonic-assisted magnetic solid phase extraction of morphine in urine samples by new imprinted polymer-supported on MWCNT-Fe3O4-NPs: Central composite design optimization

Multiwalled carbon nanotubes (MWCNTs) were magnetized with Fe₃O₄ nanoparticles (MWCNTs-Fe₃O₄-NPs) and subsequently coated by vinyl end groups (Vinyltrimethoxysilane). MWCNT-Fe₃O₄-NPs were used as support for a new morphine (MO) molecularly imprinted polymer (MWCNT-Fe₃O₄-NPs@MO-MIP) by surface imprinting polymerization method. The MWCNT-Fe₃O₄-NPs@MO-MIP was characterized by FTIR, VSM and SEM techniques and successfully used for determination of MO. Ultrasonic-assisted magnetic solid phase extraction followed by UV–vis spectrophotometer (UAMSPE-UV–vis) was investigated for MWCNT-Fe₃O₄-NPs@MO-MIP and compared with non-imprinted polymer (NIP) using batch method. Central composite design under response surface methodology was used for the evaluation of the effect of variables, individually, as well as their possible interaction effects on the adsorption process. The variables such as sonication time, MWCNT-Fe₃O₄-NPs@MO-MIP mass, initial concentration of MO and pH were investigated in this study. At optimum experimental conditions, UAMSPE-UV–vis method was exhibited a linear range of 0.8–8.7 mg L⁻¹ of the MO concentration with a detection limit of 0.18 mg L⁻¹. The relative standard deviation for the analyte was found to be lower than 2.32%. The MWCNT-Fe₃O₄-NPs@MO-MIP adsorption capacity was found to be 37.01 mg g⁻¹. The enrichment and preconcentration factors were found to be 107.01 and 98.21, respectively. The developed method was finally applied successfully to the determination of MO in urine and wastewater samples with the recoveries ranged from 96.40 to 105.6%.     

Influence of silicon on the microstructure and mechanical properties of Zr-Si-N composite films

A series of Zr-Si-N composite films with different Si contents were synthesized in an Ar and N₂ mixture atmosphere by the bi-target reactive magnetron sputtering method. These films’ composition, microstructure and mechanical properties were characterized by energy dispersive spectroscopy, X-ray diffraction, scanning electron microscopy, atomic force microscopy and nanoindentation. Experimental results revealed that after the addition of silicon, Si₃N₄ interfacial phase formed on the surface of ZrN grains and prevented them from growing up. Zr-Si-N composite films were strengthened at low Si content with the hardness and elastic modulus reaching their maximum values of 29.8 and 352 GPa at 6.2 at% Si, respectively. With a further increase of Si content, the crystalline Zr-Si-N films gradually transformed into amorphous, accompanied with a remarkable fall of films’ mechanical properties. This limited enhancement of mechanical properties in the Zr-Si-N films may be due to the low wettability of Si₃N₄ on the surface of ZrN grains.     

Microstructure of laser melted Al18B4O33w/2024Al composite

The microstructure of a laser treated Al₁₈B₄O₃₃w/2024Al composite has been investigated using transmission electron microscope (TEM), low-angle (glancing angle) X-ray diffraction (XRD) techniques. Various surface microstructures were observed in the laser treated composite. The Al₁₈B₄O₃₃ whisker on the surface of the composite was decomposed during laser surface melting, various decomposition products were studied in the laser treated composite. Eutectic phases and the precipitation in the matrix of the composite with laser-treated were observed. The main phases detected in the molten zone were aluminum and decomposition products Al₂O₃. The effect of laser treatment on the hardness of the composite was also examined. A surface hardness of 400 Hv was noted.     

梯度颗粒复合介质的光学双稳

重点研究了组分的梯度构形对带壳球形颗粒复合介质的光学双稳特性的影响.其中球形颗粒是由非线性核和介电函数具有梯度分布的线性壳组成.对于壳层介电函数具有幂指数分布的情况,通过求解麦克斯韦方程,得到各区域的势能分布函数,从而求得核内电场的数学表达式.数值研究发现,该复合介质的光学双稳阈值和区域与壳层的厚度及壳层的介电幂指数有关,随着壳层厚度增大或幂指数增大,双稳阈值将变宽.此外,还研究了正入射情况下复合材料体系的反射系数随外电场的变化情况, 发现其关系曲线是一条回线. 关键词： 梯度颗粒 复合介质 光学双稳     

Infrared/laser multi-sensor fusion and tracking based on the multi-scale model

The state estimation problem of targets detected by infrared/laser composite detection system with different sampling rates was studied in this paper. An effective state estimation algorithm based on data fusion is presented. Because sampling rate of infrared detection system is much higher than that of the laser detection system, the theory of multi-scale analysis is used to establish multi-scale model in this algorithm. At the fine scale, angle information provided by infrared detection system is used to estimate the target state through the unscented Kalman filter. It makes full use of the high frequency characteristic of infrared detection system to improve target state estimation accuracy. At the coarse scale, due to the sampling ratio of infrared and laser detection systems is an integer multiple, the angle information can be fused directly with the distance information of laser detection system to determine the target location. The fused information is served as observation, while the converted measurement Kalman filter (CMKF) is used to estimate the target state, which greatly reduces the complexity of filtering process and gets the optimal fusion estimation. The simulation results of tracking a target in 3-D space by infrared and laser detection systems demonstrate that the proposed algorithm in this paper is efficient and can obtain better performance than traditional algorithm.