On the uniqueness of the foliation of spheres of constant mean curvature in asymptotically flat 3-manifolds

In this note we study constant mean curvature surfaces in asymptotically flat 3-manifolds. We prove that, outside a given compact subset in an asymptotically flat 3-manifold with positive mass, stable spheres of given constant mean curvature are unique. Therefore we are able to conclude that the foliation of stable spheres of constant mean curvature in an asymptotically flat 3-manifold with positive mass outside a given compact subset is unique.

     

HL-2Aƫ�����ṹ���켰�ȸ��ɷ���

根据HL-2A装置改造的初步方案,选择优化的偏滤器位形所决定的参数,设计出可采取的偏滤器结构及水冷方式。外靶板和拱顶板上采用双剪切连接件和环向水路具有极向水流的冷却方式。通过ANSYS编码对靶板的热负荷进行分析,结果表明这样的冷却方式在降低流速要求的条件下可以提高靶板表面承载能力。     

生长曲线模型中的联合影响分析

本文讨论了生长曲线模型中多组数据对回归分析的联合影响问题,给出了度量准则及其化简式与统计解释,推广了已有文献中的有关结果.     

相干叠加态高次谐波发射的时间行为分析

本文研究了一维模型分子离子(初态为基态和一个激发束缚态叠加的相干态)在超强超短激光脉冲作用下的谐波发射谱.我们发现在高次谐波谱平台区域出现了周期性的结构变化.我们利用小波变换对谐波谱进行了暂态时间频率分析,结果表明该谐波结构产生的原因是由电离电子返回母离子时与不同束缚态复合而产生的谐波光脉冲之间相干叠加.同时采用半经典计算,对所得到的计算结果进行了分析,验证了我们的结论.     

Growth kinetics of iron boride layers: Dimensional analysis

Dimensional analysis is presented as a powerful tool in the study of the paste boriding process. In particular, a dimensional method is used to study the growth kinetics of the boride layers FeB and Fe₂B. Experiments were performed in AISI 1045 steel and AISI M2 steel, to test the suggested model. Samples of 1045 steel were prepared and treated using boron paste thickness of 3-5 mm, at temperatures of 1193, 1223 and 1273 K, with 2, 4 and 6 h of treatment time. The M2 specimens had boron paste thickness of 3 and 4 mm and temperatures of 1223, 1253 and 1273 K for 2 and 6 h. Results indicate that the growth of boron layers obeys power laws of the form y = αx^β, where α and β constants are a function of the material and the interface of interest. Validation of the model was carried out using experimental data with an average error percentage of 7.6% for Fe₂B in 1045 steel, 15.8% for FeB and 3.4% for Fe₂B in M2 steel.     

1.54μmEr3+,Yb3+共掺玻璃激光器的速率方程及数值分析

LD抽运共掺Er,Yb玻璃激光器中的跃迁过程较复杂,针对双掺离子之间的能量传递和Er3+的多种跃迁过程,给出了详细的准三能级系统的速率方程,在合理简化后进行了数值分析,分析了Er3+掺杂浓度和介质长度、抽运光斑、输出镜透过率、谐振腔长、抽运光的椭圆度等因素对激光阈值及斜率效率的影响. 关键词： 1.54μm激光 Er3+玻璃 速率方程 数值分析     

Effects of Nb2O5 on thermal stability and optical properties of Er3+-doped tellurite glasses

Er³⁺-doped tellurite glasses with molar compositions of xNb₂O₅-(14.7-x)Na₂O--10ZnO--5K₂O--10GeO₂-- 60TeO₂--0.3Er₂O₃ (x=0, 3, 5, 7 and 9) have been investigated for developing 1.5~μm fibre and planar amplifiers. The effects of Nb₂O₅ on the thermal stability and optical properties of Er³⁺-doped tellurite glasses have been discussed. It is noted that the incorporation of Nb₂O₅ (x=5) increases the thermal stability of tellurite glasses significantly. Er³⁺-doped niobium tellurite glasses exhibit a large stimulated emission cross-section (7.2\times 10^-21- 10.7×10^-21~cm² and the gain bandwidth, FWHM×\sigma_e^{\rm peak} (274\times 10^-28 - 480×10^-28~cm³), which are significantly higher than that of silicate and phosphate glasses. In addition, the intensity of upconversion luminescence of the Er³⁺-doped niobium tellurite glasses decreases rapidly with increasing Nb₂O₅ content. As a result, Er³⁺-doped niobium tellurite glasses might be a potential candidate for developing laser or optical amplifier devices.     

固相微萃取法-气相色谱-质谱联用技术简化分析生活污水

用不同的固相微萃取（SPME）针头结合气相色谱－质谱分析对生活污水进行提取、浓缩、分离、测定，对照结果表明，用聚硅氧烷涂层可以减少一次分析化合物的种类，提高分析的准确性。