电热耦合综合能源系统双阶段多目标规划研究

多能耦合系统是未来分布式能源供给方式的重要发展方向。为了实现电热耦合能源供给系统的合理规划、促进能源供给与消费的经济与环保的协调发展,提出一种面向电热耦合能源系统的综合能源系统双阶段规划优化方法。模型的第一阶段是在投资和环境最优的目标下实现电热耦合综合能源系统的合理规划,第二阶段是在考虑设备运行特性的基础上对规划的结果进行运行优化,以获得能源系统的最优运行方案,并从多个指标验证规划方案的合理性。利用NSGA-II算法求得模型进的帕累托解集,使用多准则妥协优化法从帕累托解集中决策出最优配置方案。仿真结果表明,提出的双阶段多目标综合能源规划方法能够实现能源供给系统的经济与环保双优。     

利用两色红外组合场驱动氦原子产生单个阿秒脉冲

利用数值求解原子在强激光场中的含时薛定谔方程,对一维氦原子处于两色红外组合场中产生的高次谐波进行了研究,研究发现,在组合场驱动下,谐波谱的截止位置可以拓展到 ,从而得到脉宽较短的多个阿秒脉冲,通过改变两束激光的相位延迟,最终得到了33.8as的单个脉冲。进一步利用小波变换分析了阿秒脉冲的发射特征,发现单个阿秒脉冲实现是对电子长路径抑制的结果.     

光学透明频率选择表面的设计研究

以氟化镁为基底材料, 采用基底、金属网栅与频率选择表面一体化设计方法设计了一种雷达波与光学波段双带通的结构. 利用模式匹配法对设计结构的传输特性进行了仿真研究, 并将设计结果与制备样件的测试结果进行了对比分析. 结果发现: 采用一体化设计的方法设计光学透明频率选择表面, 不仅能够快速得到电场基函数而且还能够准确预估其谐振尺寸, 从而在提高计算效率的同时避免了模式互作用零点的出现. 采用一体化设计方法获得了具有稳定滤波特性的光学透明频率选择表面, 为雷达/红外双模制导头罩的电磁屏蔽技术和隐身技术提供了一种有效技术方案. 关键词： 复合制导 频率选择表面 金属网栅 一体化设计     

氨吸收式串联型动力/制冷复合循环

本文提出了一种新型的采用氨水混合工质的动力／制冷复合循环,该循环以中低温工业余热或燃气轮机排气为热源,将动力、制冷子循环采用串联方式连接,基础循环工质为氨质量浓度为0．27的氨水溶液,热源为365℃／104．3 kPa 的热空气,透平进气参数为350℃／3750 kPa,,以热效率η1、(火用)效率η2作为评价准则,模拟计算表明本循环的热效率η1 为17．8％,炯效率η2为45％,通过与其它有代表性的分供系统及联供系统进行热力性能方面的比较,表明本循环η1、η2均有不同程度提高。     

采用光纤技术实现拉曼光谱和扫描隧道显微镜实时联用测试

设计并制作了与扫描隧道显微镜（ＳＴＭ）探头和拉曼光谱仪相适配的光纤探测装置，该装置采用配有不很短焦距的自聚焦透镜以获得较大的相对孔径，并使用多束光纤以充分利用扫描隧道显微镜探针周围有限空间，提高了拉曼散射光的收集效率，获得具有较高信噪比的拉曼谱图，在该装置的基础上进一步建立拉曼－扫描隧道显微镜联用系统，初步实验表明该联用系统用于实时研究固／气和固／液界面体系是可行的，即利用扫描隧道显微镜可获得固体     

气粒混合物非灰辐射特性合并宽窄谱带K分布模型

气粒混合物辐射问题具有全场性、非灰性、耦合性等特点,准确预估高温燃气/粒子非灰辐射特性是非常重要的。本文将合并宽窄谱带K分布模础(CWNBCK)与离散坐标法(DOM)结合,开展了非灰气粒混合物辐射换热问题的模拟工作,分别验证了一维和三维情况下应用该模型的准确性,给出不同工况下的热流源项、壁面热流或辐射热流等。结果表明:该模型能够给出与SNB模型精度基本相同的结果,考虑其计算效率的提高,可以在工程实际中应用该模型计算非灰气粒混合物辐射换热。     

燃气-蒸汽联合循环余热回收系统性能研究

燃气发电是我国城市供电的主要形式之一,针对LNG接收站一体的电厂发电模式进行研究,提出一种新型燃气-蒸汽联合循环热电联供系统,利用超临界CO2布雷顿循环结合有机朗肯循环(ORC)辅助发电,将LNG作为冷源,对烟气余热进行三级利用.通过构建热力学和经济模型,以Aspen Plus软件模拟值为基础,结果表明:在消耗燃料1....     

Why does necking ignore notches in dynamic tension?

Recent experimental work has revealed that notched tensile specimens, subjected to dynamic loading, may fail by growing a neck outside of the notched region. This apparent lack of sensitivity to a classical stress concentration case was reported but not explained or modeled.The present paper combines experimental and numerical work to address this issue. Specifically, it is shown that the dynamic tensile failure locus is dictated by both the applied velocity boundary condition and the material mechanical properties, specifically strain-rate sensitivity and strain-rate hardening.It is shown that at sufficiently high impact velocities, the flows stress in the notch vicinity becomes quite higher than in the rest of the specimen, so that while the former resists deformation, it transfers the load to the latter. The result will be the formation of a local neck and failure away from the notch.This effect is shown to be active when the material properties are perturbed only at the local level, as in the case of machining of the notch, which in itself may again be sufficient to stabilize the structure under local failure until a neck forms elsewhere.While the physical observations are quite counterintuitive with respect to the engineering views of stress concentrator's effect, the present work rationalizes those observations and also provides information for the designers of dynamically tensioned structures that may contain notches or similar flaws.     

Microstructural model for cyclic hardening in F-actin networks crosslinked by α-actinin

The rheology of F-actin networks has attracted a great attention during the last years. In order to gain a complete understanding of the rheological properties of these novel materials, it is necessary the study in a large deformations regime to alter their internal structure. In this sense, Schmoller et al. (2010) showed that the reconstituted networks of F-actin crosslinked with α-actinin unexpectedly harden when they are subjected to a cyclical shear. This observation contradicts the expected Mullins effect observed in most soft materials, such as rubber and living tissues, where a pronounced softening is observed when they are cyclically deformed.We think that the key to understand this stunning effect is the gelation process. To define it, the most relevant constituents are the chemical crosslinks – α-actinin –, the physical crosslinks – introduced by the entanglement of the semiflexible network – and the interaction between them. As a consequence of this interaction, a pre-stressed network emerges and introduces a feedback effect, where the pre-stress also regulates the adhesion energy of the α-actinin, setting the structure in a metastable reference configuration. Therefore, the external loads and the evolvement of the trapped stress drive the microstructural changes during the cyclic loading protocol. In this work, we propose a micromechanical model into the framework of nonlinear continuum mechanics. The mechanics of the F-actin filaments is modelled using the wormlike chain model for semiflexible filaments and the gelation process is modelled as mesoscale dynamics for the α-actinin and physical crosslink. The model has been validated with reported experimental results.     

二维铁磁系统的纵向声频支声子的硬化

在二维正方Heisenberg铁磁系统的基础上建立了磁振子-声子相互作用模型.利用Matsubara格林函数理论研究了系统的纵向声频支声子激发,计算了布里渊区的主要对称点线上的纵向声频支声子色散曲线.发现在第一布里渊区,纵向声频支声子没有软化现象只有硬化现象,并且在布里渊区的边界区域纵向声频支声子硬化现象更加明显,又讨论了各项参数的变化对纵向声频支声子硬化的影响.对纵向声频支声子硬化起主要的是磁振子.声子耦合强度、材料的德拜温度θD、温度.在有限温度磁振子-声子相互作用下,只有横向声频支声子存在软化,而纵向声频支声子无软化只有硬化.