Strength of cylinder joint adhesively bonded by coupling

Summary A method of joining two metal cylindrical shafts with adhesive coupling is proposed. Two cylindrical shafts with the same diameter are connected by bonding through a cylindrical coupling with epoxy resin. The strength of the shaft joint under tensile loading and torsional loading is investigated analytically and experimentally. The stress and strain distributions of the shaft joint is analyzed by the finite element method. The analyzed strain distributions in the joint are compared with experimental values. The joint strength is predicted by applying the strength laws of shafts, coupling, adhesive layer and adhesive interface between shaft and adhesive coupling. The effects of the coupling dimension on the joint strength are examined. It is shown that the adhesive shaft joint can transfer the load by which the cylindrical shafts are plastically deformed.This paper was refined by the author, K. Ikegami, during statying at Technische Universität München under the support of Deutscher Akademischer Austauschdients. The author is grateful to Professor Lippmann of Technische Universität München who is the host professor of the support.     

浅谈我国合并报表的方法

通过对近年来国内外有关合并会计报表文献的认识和了解,比较了购买法和权益结合法这两种合并会计报表方法的特点和区别,并简略地分析了购买法和权益结合法在我国的适用性,最后对我国有关企业合并会计报表制度制定提了几点设想。     

精测安培表内阻的新方法——电桥伏安法

本文提出了精测安培表内阻的新方法,并将其与其它测量方法进行了比较。     

排气全燃型联合循环设计点性能简明估计公式

排气全燃型联合循环设计点性能简明估计公式蔡睿贤（中国科学院工程热物理研究所北京１０Ｏ０８０）关键词：排气全燃型联合循环，热力分析主要符号表Ｈｕ燃料热值Ｌ燃料理论空气量ｌ比功Ｐ单位能量价格Ｒ燃气轮机与蒸汽轮机的功率比α过量空气系数β摩尔燃料系数△增量η...     

承受拉-扭组合载荷的薄壁圆筒屈服时产生塑性流动的条件

提出了在无外力作功的情况下，具有Bauschinger效应的弹塑性材料处于屈服状态产生自发的塑性流动时应满足的条件．这个条件不仅与材料的力学性能有关，而且还处决于材料的具体的载荷边界条件和变形．举例说明了承受拉一扭组合的薄壁圆筒中，采用组合强化模型时，产生塑性流动的具体条件．     

流体力学综合实验台的设计与应用

介绍了青岛理工大学流体力学性能综合实验台,该实验台技术先进,自动控制参数,测试精度高,可以在实验台上开设多个实验,其计算机辅助测试系统,在线监视整个实验过程、流量、流速、管道阻力系数、水泵性能实验等实时检测;显示记录、存储、列表和打印等。     

工业CT图像均匀性校正

在工业CT图像重建过程中,射束硬化使得图像出现“杯状”伪影,阵列探测器响应不一致使得图像出现环状伪影、带状伪影和点伪影,影响图像均匀性.本文分析了射束硬化的原理和探测器响应不一致的数学模型,并通过实验,对探测器响应进行多挡板定标得到校正系数表.利用查表插值的方法对投影数据进行均匀性校正,消除上述伪影.     

Uniform random number generation

In typical stochastic simulations, randomness is produced by generating a sequence of independent uniform variates (usually real-valued between 0 and 1, or integer-valued in some interval) and transforming them in an appropriate way. In this paper, we examine practical ways of generating (deterministic approximations to) such uniform variates on a computer. We compare them in terms of ease of implementation, efficiency, theoretical support, and statistical robustness. We look in particular at several classes of generators, such as linear congruential, multiple recursive, digital multistep, Tausworthe, lagged-Fibonacci, generalized feedback shift register, matrix, linear congruential over fields of formal series, and combined generators, and show how all of them can be analyzed in terms of their lattice structure. We also mention other classes of generators, like non-linear generators, discuss other kinds of theoretical and empirical statistical tests, and give a bibliographic survey of recent papers on the subject.     

COMBINED PARTIAL OXIDATION AND CARBONDIOXIDE REFORMING OF METHANE PROCESS TO SYNTHESIS GAS

IntroductionIthasbccndcmonstratcdthatmcthancrcformingt"ithcarbondioxidcpr0ducessynthcsisgasrichincarbonmonoxidc-x"hichisuscfulforthcs}nthcsisofaccticacid'dimcthylcthcrando.o-alcoholsll'2].Carbondioxidcref0rmingismorccndothcrmicthanstcamrcformingfCH4 CO2,'2CO 2H2Ai/'2,,=2473kJ..ol-1(l)Accordingl\"thisrcact1onnccdshighcrtcmpcraturcandlimitsspaccvclocityoffccdgas,Wehavcprct'ious1\studicdmcthancrcformingt"lthC02inthcmonotubcproccssl3J.Inordertoconvcrtmcthancinfccdgascomplctcl}',thcspaccvcloci…     

42CrMo钢离子氮化—沉淀强化组织结构的研究

研究了42CrMo钢离子氮化—沉淀强化的组织结构,结果表明,离子氮化层的组成为ε、r＇a_N、Fe_3C和少量Cr_2N、Mo_2N、CrMoN_x及a";经时效处理后,ε相和a_N相弥散析出Cr_2N、Mo_2N和a" 。325℃时效,CrMoN_x消失;500℃时效,Mo_2N大大减少。a"、Cr_2N和Mo_2N弥散共格析出,必将使氮化层强化。