棒材热连轧力能参数的解析

采用三维流函数法 ,对棒材热连轧时的椭圆 -圆孔型系统进行了力能参数的解析 ,其结果与实测符合的很好。该法也可以用于高速线材椭圆 -圆孔型轧制力的计算。     

乳化液防锈性评价方法的试验研究

根据冷轧乳化液使用时的具体条件，提出了一套评价乳化液防锈性的新方法，并用该方法对乳化液防锈性进行了试验。试验结果说明，使用后的乳化液防锈性下降；轧后带卷的温度可以加速带钢生锈；中间退火后的带钢轧制时防锈性变差；防锈性好的乳化液与防锈性差的乳化液配比，对防锈性差的乳化液有利，最佳配比为3：1。工厂实践证明，试验结果是正确的，该评价方法可行。     

按两连架杆对应角位移设计四杆机构的又一解析法

本文介绍的实现两连架杆对应角位移四杆机构的解析法设计,是根据等视角作图法原理建立起来的又一种解析方法.该法恰当地把解析法的精确性和图解的直观性密切地结合起来.和用该法不仅获得精确的设计结果,而且计算颇为简单.对于设计计算结果可以直接用作图法进行检验.因此,为四杆机构的设计提供了尤为方便的手段.     

均匀棒纯纵向运动方程初边值问题的有限体积法

提出了均匀棒纯纵向运动方程初边值问题的有限体积格式,给出了有限体积解的误差分析,得到了有限体积解的最优阶L2和H1误差估计及超收敛H1误差估计,提供了一个数值算例.     

Stir bar sorptive extraction-gas chromatography-mass spectrometry analysis of tetramethylene disulfotetramine in food: Method development and comparison to solid-phase microextraction

A stir bar sorptive extraction-gas chromatography-mass spectrometry (SBSE-GC-MS) method for the determination of tetramethylene disulfotetramine is presented. The limits of detection (LOD) of the optimized method was 0.2 ng g⁻¹ for extractions from water and 0.3-2.1 ng g⁻¹ for extractions from foods. Recovery was highly matrix dependent (36-130%) and quantification required standard addition calibrations. Standard addition calibration lines had high linearity (R² > 0.97) and replicate extractions had good reproducibility (R.S.D. = 4.4-9.8%). A comparison of the SBSE method and a previously developed headspace (HS)-solid-phase microextraction (SPME) method was performed. Generally, SBSE provided higher sensitivity with decreased analysis time.     

Algebras Generated by Linearly Dependent Elements with Prescribed Spectra

We consider associative algebras presented by a finite set of generators and relations of special form: each generator is annihilated by some polynomial, and the sum of generators is zero. The growth of this algebra in dependence on the degrees of the polynomials annihilating the generators is studied. The tuples of degrees for which the algebras are finite-dimensional, have polynomial growth, or have exponential growth are indicated. To the tuple of degrees, we assign a graph, and the above-mentioned cases correspond to Dynkin diagrams, extended Dynkin diagrams, and the other graphs, respectively. For extended Dynkin diagrams, we indicate the hyperplane in the space of parameters (roots of the polynomials) on which the corresponding algebras satisfy polynomial identities.     

热转印色带的制备及性能研究

制备了一种热转印色带,并研究了球磨时间、分散剂等对颜料分散性的影响规律,热容量及油墨结构对色带热转移率等性能的影响。结果表明,由此制备的热转印色带,在热转印条码打印机上实验,印制出了放大系数M =0.76,可以被正确识读的条码符号。为研制开发热转印色带作了基础性探讨工作。     

数控车床棒料送料装置的类型及其选择

针对工厂工艺规划中数控车床自动棒料送料装置选型与配套问题，介绍了３种典型棒料送料装置，分析了每种送料装置的工作原理、特点和适用范围。给出了根据生产实际选配料控车床棒料送料装置的原则，并结合实际进行了送料器选型分析。     

经编绒类产品的开发和应用

介绍了在单针床经编机和双针床经编机上的不同绒类织物，及在实际中的应用，并且给出了部分成熟工艺。