拆边法求最短路径

本文利用局部比较法 ,在图中定义子图、无效路径、以及可去边 .利用推导的有关定理 ,拆去可去边 ,利用最短路径相同的等价性 ,达到化简图 ,从而求出最短路径     

Lipschitz条件题设的完善

本文给出了函数单侧极值点的定义,并证明了连续函数的单侧极值点所成之集与实数集等势,且利用此完善了函数满足Lipschitz 条件的题设。     

基因工程菌株EscherichiacoliC600（pRLK14）的流加培养

在１Ｌ搅拌发酵罐中对含有重组质粒ｐＲＬＫ１４的大肠杆菌进行了培养。结果表明，采用二段培养法，于３４℃增殖细菌，在对数增殖后期升温到４２℃进行诱导，可以高效表达基因产品半乳糖激酶。诱导期，醋酸浓度增长较快，模拟实验表明，控制醋酸浓度可进一步提高半乳糖缴酶产率。     

Theoretical analysis of the onset of liquid entrainment for slots of finite width

The onset of liquid entrainment during discharge from large reservoirs containing a stratified mixture of two immiscible fluids through a side slot of a finite width is considered theoretically. A previously reported analysis in which the slot was approximated as a two-dimensional line sink has been extended to account for the finite width of the slot. The model resulting from the present analysis is expressed in terms of two simple algebraic equations suitable for hand calculations. According to the present results, the ratio of the critical height to the slot width is dependent only on the Froude number. Numerical results show that the present model approaches the correct physical limits at low Froude numbers and it converges to the predictions of the previously reported simple model at high Froude numbers.     

凸六边形的相对长边与相对短边

就Doliwaka和Lassak提出的凸n－边形的相对边问题，讨论n＝6的情形，将凸六边形嵌入到平等四边形内（边可重叠），利用对应边的边长比的关系可证任意凸六边形均有相对长边，有平行对边的凸六边形必有相对短边。     

废热锅炉盘管的非正常损伤

By using optical microstructure(OM), X-ray diffractometer analyses and mechanical properties testing, the abnormal damage of pipe coil in remaining heat boiler has been investigated. The damage is the result of the melting of tube base metal at high temperature caused by the ignition inside the tube.     

高频单线圈双调谐NMR单晶探头的研制

本文报道了一种测角单晶NMR探头。该探头采用单线圃双调谐电路,工作频率在90MHz-110 MHz连续可调,可进行交叉极化大功率去耦实验。文中提出了一种简单而有效的测角装置,可使单晶绕三个互相垂直轴转动实现单晶的NMR测量。作为典型的应用例子,本文利用该探头实现了单晶DGO(2NH₂CH₂COOH·H₂C₂O₄)屏蔽张量的测量。     

二极管激光侧泵浦单横模100Hz电光调Q激光器

介绍了二极管激光侧泵浦单横模１００Ｈｚ电光调Ｑ激光器的实验结果。泵浦源为一个线阵准连续１００Ｗ二极管激光器，激光工作介质为ＮｄＹＡＧ薄梯形板条，板条与泵浦源间用柱透镜耦合，ＫＤ＊Ｐ电光晶体调Ｑ。在１００Ｈｚ重复频率下，获得单脉冲能量２．３７ｍＪ，脉宽小于７ｎｓ，光束质量因子Ｍ２＝１．１的１．０６μｍ激光，光－光效率为８．５％，斜效率为１８．７％。     

建筑卷扬机卷筒端侧板强度的理论分析与试验研究

本文依据理论分析、光弹性试验、电测试验并经数学拟合,建立了卷扬机卷筒端侧板强度计算公式.     

Thermal stability of poly(mono-n-alkylitaconates) and mono-n-alkylitaconate-co-vinylpyrrolidone copolymers I

Poly(monoitaconates) containing octyl, decyl and dodecyl groups and random monoalkylitaconate-co-vinylpyrrolidone copolymers were studied by thermogravimetric analysis. Copolymers of mono-n-octylitaconate (MOI), mono-n-decylitaconate (MDI), and mono-n-dodecylitaconate (MDoI), respectively, with N-vinyl-2-pyrrolidone (VP) of different compositions were studied by dynamic thermogravimetric analysis. The thermal stability of the copolymers depends on the structure of the monoitaconate comonomer and on the composition of the copolymer The kinetic analysis of the degradation data shows that the thermal decomposition of these copolymers can be described by several kinetic orders depending on the copolymer and on the composition. The relative thermal stability of the copolymers increases as the VP content increases and as the length of the side chain of the itaconate increases, following the same trend as the flexibility of the copolymers in solution.