减小穿过线圈式涡流探伤不可探区长度的研究

针对穿过线圈式涡流探伤头、尾信号大的特点,通过对前置放大器的增益进行自动控制和改善带通滤波器的滤波性能,减小钢管头部不可探区的长度。将辊道电机驱动变频器频率调在45Hz上,对Ф168 mm、厚6 mm的钢管进行探伤实验,可清晰地检测出距钢管头部103 mm处的凹坑。     

脱氧核糖核酸分子在高分子溶液3个不同浓度区间的电泳迁移行为

 借鉴高分子亚浓溶液线团收缩理论 ,研究了脱氧核糖核酸 (DNA)片段在高分子溶液全浓度区间的电泳迁移行为。结果表明 ,在高分子稀溶液、亚浓溶液和浓溶液 3个不同浓度区间 ,DNA的电泳迁移行为各不同 ,DNA片段的分离在这 3个浓度区间也存在差异。     

Effect of the Coil Angle in an Inductively Coupled Plasma Torch: A Novel Two-Dimensional Model

A two-dimensional model has been developed for the calculation of the electromagnetic (EM) fields generated by spiral coil currents, in order to obtain a better representation of the actual configuration used in a typical inductively coupled plasma (ICP) torch. In order to obtain the EM fields in a two-dimensional model, the change of EM field in tangential direction is neglected and the coil is assumed to be a concentric cylinder. In order to justify our assumption, the EM, flow and temperature fields resulting from five-ring coil and concentric cylinder coil are compared and the results are almost the same except for the EM field in the vicinity of the coil. In the case of the spiral coil, the coil current is inclined with respect to the horizontal plane. Therefore current in the cylinder coil is assumed to have the same inclined angle, which is split into tangential and axial components. The axial electric field and hence an axial current in plasma is induced by the axial component of the spiral coil current. Charge density is accumulated in the plasma, since the axial current cannot form a loop. In order to obtain the EM field and the charge distribution in the plasma generated by the spiral coil, the equations of axial vector potential and electrostatic potential have been derived. Due to the swirling Lorentz force (J_z×B_r) an axisymmetrical swirling fluid model is used to simulate the plasma flow in an axisymetrical configuration. With an inclined angle of the coil current being 3.7° and the frequency being 3 MHz, computational results show that the swirling Lorentz force causes plasma swirling with a maximum speed of 3.41 m/s near the plasma center when the injected sheath gas and central gas are not swirling. In these conditions, the real and imaginary parts of the maximum electrostatic potential are 0.95 V and 1.66 V, respectively. When the electrostatic field is neglected, the swirling velocity of the plasma is 3.95 m/s.     

Counter-current chromatographic separation of nucleic acid constituents with a hydrophilic solvent system

Nucleic acid constituents such as nucleobases, nucleosides and nucleotides were separated by counter-current chromatography using type J coil planet centrifuge. The separation was performed with a hydrophilic solvent system composed of 1-propanol/800 mM potassium phosphate buffer (pH 7.4) (1:1, v/v) by eluting the lower aqueous phase at a flow-rate of 0.5 ml/min. Eight selected nucleic acid constituents (4.0 mg, 0.5 mg of each), uridine monophosphate (UMP), adenosine monophosphate (AMP), deoxyadenosine monophosphate (dAMP), uridine, urasile, deoxy uridine, adenosine and adenine were well resolved within 160 min.     

Selective formation of AAB- and ABC-type heterotrimeric alpha-helical coiled coils

The alpha-helical coiled coils have a representative amino acid sequence of (abcdefg)(n) heptad repeats. We previously reported that two peptides named IZ-2A and IZ-2W formed an (IZ-2A)(2)/IZ-2W heterotrimer with an Ala-Ala-Trp interaction in the hydrophobic core. In this paper, we describe the selective formation of AAB- and ABC-type heterotrimers. To increase the selectivity of the AAB-type heterotrimeric formation, Lys residues at the f position were mutated to either an Ala or a Gln residue to form IZ-2A(fA) or IZ-2W(fQ). Separately, both IZ-2A(fA) and IZ-2W(fQ) have a random structure at pH 7 and 20 degrees C. However, together IZ-2A(fA) and IZ-2W(fQ) form a 2:1 complex with a thermal transition midpoint (Tm) of 48 degrees C. This procedure was applied to prepare the ABC-type heterotrimer, in which two sets of Ala-Ala-Trp interactions were designed in the hydrophobic core. Interhelical interaction between the e and g positions and the alpha-helical propensity of the amino acid at the f position were also considered in the design. The resultant three peptides selectively formed the ABC-type heterotrimer with a Tm of 51 degrees C. Other peptide combinations had random coil properties.     

Supramolecular nanostructures from self‐assembly of T‐shaped rod building block oligomers

T‐shaped coil–rod–coil oligomers, consisting of a dibenzo[a,c]phenazine unit and phenyl groups linked together with acetylenyl bonds at the 2,7‐position of dibenzo[a,c]phenazine as a rigid segment have been synthesized. The coil segments of these new molecules composed of poly(ethylene oxide) (PEO)–poly(propylene oxide) (PPO) incorporating lateral methyl groups between the rod and coil segment and two flexible alkyl groups connecting with the rigid segment at the 4,6‐position of dibenzo[a,c]phenazine, respectively. The experimental results reveal that the length of the flexible PEO coil chain influence construction of various supra‐nanostructures from lamellar structure to rectangular columnar structure. It is also shown that introduction of different length of alkyl side chain groups in the backbone of the T‐shaped molecules affect the self‐organization behavior to form hexagonal perforate layer or oblique columnar structures. In addition, lateral methyl groups attached to the surface of rod and coil segments, dramatically influence the self‐assembling behavior in the crystalline phase. T‐shaped molecules containing a lateral methyl group at the surface of rod and PEO coil segments, self‐assemble into 3D body‐centered tetragonal structures in the crystalline phase, while molecules without a lateral methyl group based on PEO coil chain self‐organize into 2D oblique columnar crystalline structures. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5021–5028     

Nafion化学修饰圆盘预富集-石墨炉 原子吸收联用法对牛血超氧化物歧化酶中铜、锌分布状态的研究

本文研究了Nafion化学修饰钨丝圆盘预富集-石墨炉原子吸收(GFAAS)方法测定牛血超氧化物歧化酶(SOD)中游离态Cu～(2+)及Zn～(2+)的方法,并用GFAAS法直接测定SOD中铜、锌的总量,证实了牛血SOD中金属辅基铜、锌原子个数比为1:1,初步探讨了一定浓度的牛血SOD中Cu～(2+)、Zn～(2+)的表观离解平衡常数。为提高SOD的活性和稳定性的研究,提供了一种有效的方法。     

Particle scattering factor of pearl necklace chains

The particle scattering behaviour of a pearl necklace chain is derived. The chain is composed of sphere-like pearls, separated by rod-like segments of fixed length, which have no angular restrictions. By calculating several series of model scattering curves, the important structural features are retrieved. The model is believed to be useful in interpreting intermediate structures of collapsing macromolecules or polyelectrolytes. A first application to a shrinking polyelectrolyte coil generated by molecular dynamic simulations (Limbach and Holm, J.Phys.Chem. 2003) is presented and used to discuss the potentials and limits of the model.     

Radiation formation of polymeric nanogels

An alternative method of synthesis of polymeric nanogels is proposed, based not on polymerization, but on intramolecular crosslinking of polymer chains, initiated by pulse irradiation in dilute aqueous solutions. Kinetic data show that for many water-soluble polymers irradiation under these conditions result in intramolecular crosslinking. Preliminary product studies on poly(vinyl alcohol) indicate that in fact internally crosslinked macromolecules can be obtained by this technique.     

Chemical modifiers in arsenic determination in biological materials by tungsten coil electrothermal atomic absorption spectrometry

Palladium, iridium, and rhodium are evaluated as possible chemical modifiers in the determination of As in digest solutions of biological materials (human hair and clam) by tungsten coil electrothermal atomic absorption spectrophotometry (TCA-AAS). The modifier in solution was applied onto the coil and thermally pre-reduced; the pre-reduction conditions, the amount of modifier, and the thermal program were optimized. Palladium was not satisfactory, whereas Ir and Rh were effective modifiers and rendered better relative sensitivity for As by a factor of 1.4 and 1.9, respectively compared to the case without modifier. Upon optimization of thermal conditions for As in pre-reduced Ir (2.0 µg) and Rh (2.0 µg) modifiers and in the digest solutions of the study matrices, Rh (2.0 µg) was more effective modifier and was selected as such. The mean within-day repeatability was 2.8% in consecutive measurements (25–100 µg L^–1) (3 cycles, each of n=6) and confirmed good short-term stability of the absorbance measurements. The mean reproducibility was 4.4% (n=20 in a 3-day period) and the detection limit (3 _blank/slope) was 29 pg (n=15). The useful coil lifetime in Rh modifier was extended to 300–400 firings. Validation was by determination of As in the certified reference material (CRM) of Oyster tissue solution with a percentage relative error (E _rel%) of 2% and percentage relative standard deviation (RSD%) of 3% (n=4), and by analytical recovery of As spiked in CRM of human hair [94±8% (n=4)]. The methodology is simple, fast (sample readout frequency 21 h^–1), reliable, of low cost, and was applied to the determination of As in hair samples of exposed and unexposed workers.