Enhancement of the light-scattering ability of coatings by using hollow pigments

The light-scattering properties of coatings based on monodisperse polymeric spheres of two different diameters (ca 0.5 and 1 m) were evaluated from reflectance measurements as a function of the wavelength from 400 to 700 nm. Some of these plastic pigments were hollow and it was noted that these particles gave coatings with a greater light-scattering ability than coatings based on solid particles of a similar size. It was possible to estimate the contribution of the internal pores to the scattering ability of the coating layers by saturating the layers with an oil of a refractive index similar to that of the polymeric pigment particles. A simple model accounting for the scattering provided by the internal pores of the hollow particles is suggested. The agreement between the experimental results and the prediction of the model is fair. It was noted that the light scattering coefficient of the coatings increased when the external diameter of their constituent hollow particles increased from ca 0.5 to 1 m.     

Surface and interface characterization of polyester‐based polyurethane/nano‐silica composites

Polyester‐based polyurethane/nanosilica composites were prepared via in situ polymerization and investigated by contact angle measurement, transmission electron microscopy (TEM), atomic force microscopy (AFM) and peel testing in an Instron testing machine. The contact angle and surface free energy results show that nanosilica tended to enrich at the interface between nanocomposite polymers and the substrates, TEM indicated that nanosilica particles were evenly dispersed in the bulk and AFM demonstrated that nanoparticles were located at both the surfaces and interfaces of nanocomposite polymers and that the roughness of both the surfaces and interfaces had a decreasing tendency as the nanosilica content increased, as did the adhesion strength between the nanocomposite polymers and substrates. Copyright © 2003 John Wiley & Sons, Ltd.     

Control of optical properties of gel-derived oxide coating films containing fine metal particles

Control of the optical properties of gel-derived oxide films containing fine metal particles is described. The duration of the aging of Si(OC₂H₅)₄-derived sols and the amount of water for hydrolyzing Si(OC₂H₅)₄ were found to greatly affect the size and the shape of Au particles formed in the silica matrix, and accordingly the optical absorption of the Au/SiO₂ composite films. Employing dielectric media with high refractive indices like TiO₂ was shown to shift the absorption peak of Au particles to longer wavelengths. Pd/TiO₂ and Pt/TiO₂ composite films showed absorption in the visible region.     

Topographical properties of polymer films deposited in capillaries for electrophoretic separations of large organic molecules

Topography and thickness of hydrophilic polymer coatings of fused-silica capillaries for capillary electrophoresis (CE) were investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), and profilometry. Three hydrogels, poly(2-hydroxyethyl methacrylate) [poly(HEMA)], poly(diethylene glycol monomethacrylate) [poly(DEGMA)], and poly(triethylene glycol monomethacrylate) [poly(TEGMA)], were deposited using two procedures, either by simple physical sorption of the polymers, or by derivatization of the capillary wall surface with glycidyl methacrylate (EPMA) followed by polymerization of the appropriate monomers. The performance of the modified capillaries was tested under CE conditions (decrease in the electroosmotic flow, EOF dependence on pH, separation of milk and standard proteins). It has been found that the most important property of the polymer coating is its thickness, whereas its topography and the degree of its hydrophobicity are less significant. Film deposition by physical adsorption is preferable to polymerization on the derivatized surface.     

Physicochemical characterization of biological glass coatings

Metallic implants are widely used in orthopaedic surgery but metal release has been reported by several authors. High metallic ion concentration in surrounding tissues may play a major role in therapeutic failure. We have investigated in vivo and in vitro two biological glasses (BVA and BVH) used as coatings of metal implants. Physicochemical characterization was made by several complementary methods, particularly particle induced x‐ray emission (PIXE) and energy‐dispersive x‐ray spectroscopy (EDXS) associated with electronic microscopy. Analyses clearly show the differences of behaviour between both glasses. The BVA glass is bioactive, i.e. it develops a direct chemical bond between prosthesis and bone by the formation of a calcium phosphate layer at its surface. These structural and compositional modifications are caused by hydrolysis of the glass. After its dissolution BVA glass is replaced by bone, which ensures better integration of the implant in the bone site. The BVH glass is not bioactive and is used as a cement to isolate the metal implant from the biological environment, but the coating disaggregates with implantation time and glass grains migrate through the bony lacuna network. Copyright © 2003 John Wiley & Sons, Ltd.     

Preparation and properties of SiO2-TiO2 thin films from silicic acid and titanium tetrachloride

The preparation of SiO₂-TiO₂ thin films by the sol-gel method using silicic acid and titanium tetrachloride as starting materials was studied. The homogeneous sols were obtained by the condensation reaction of silicic acid with titanium tetrachloride in methanol-tetrahydrofuran. The dipcoating of slide glasses and silicon wafers followed by heat treatment gave oxide thin films of 88–93% transmittance, 3000–4500 Å thickness, and 1.45–1.80 refractive index, depending on heat-treatment temperature and TiO₂ content. FT-IR measurement showed that the Si-O-Ti bond is formed even in the sol and films. The variations of film thickness and refractive index on transformation from the gels into the oxides were found to be quite low.     

用CR传输线模型研究涂层/金属体系阻抗谱

根据CR传输线模型和QR电路之间的关系,建立了拟合其初值的计算方法,借助Z-View软件,可求得各元件精确值.根据电容（Ci）和电阻（Ri）随特征频率（f*）的分布,推导了元件相对增量与恒相位角元件（Q）指数参数n的关系. 结果表明, 当n小于0.5时,Ci比Ri增加得更快,从新的角度说明了n的物理意义及其和界面脱层之间的关系.作为应用实例,拟合了不同特征的电化学阻抗谱,分析了有机涂层/金属腐蚀体系阻抗变化的具体过程,区分了点蚀和脱层因素对阻抗谱的影响,从高阻抗体系同时得到了与不同空隙率有关的涂层电容和电阻值,并根据涂层体系的不均匀特征探讨了模型结构的物理意义.     

Polyaniline-coated silica gel

Silica gel microspheres 7 and 15 μm in diameter were coated with an overlayer of polyaniline camphorsulfonate or hydrochloride during the oxidative polymerization of aniline. Coated silica gel and polyaniline precipitate were separated using a difference in sedimentation rate. In an alternative approach, the microspheres were modified with polyaniline in the presence of 35 nm colloidal silica. This technique prevented the macroscopic precipitation of polyaniline. Coatings of neat, 3-aminopropyl- and octadecyl-modified silica gel with polyaniline hydrochloride were compared. The surface composition of coated microspheres was characterized by X-ray photoelectron spectroscopy. Potential applications of particles in electrorheology, organic catalysis, and in modeling of conductivity behavior in composites are demonstrated.     

Inhibition of Pb-Leaching from Lead Crystal Glass by Coating with Films Prepared by the Sol-Gel Method

The chemical durability of lead glass tumblers (24% PbO) in a 4% (v/v) acetic acid solution before and after coating with sol-gel derived SiO2 films was assessed to determine the extent of reduction in Pb-leaching that can be achieved. It was found that by coating the internal surface of the glass tumblers with 1 ml of 10% TEOS solutions at 100°C and densifying the coating formed at 500°C for 1 h, it was possible to reduce Pb-leaching to about one quarter of that of the uncoated glass.     

影响油气运移的应力场地温场渗流场耦合的双重介质模型

地应力场、地温场和渗流场是影响油气运移的主要因素。以此为基础,研究了含油气盆地双重介质体系内流体与岩体相互的力学作用关系,提出了双重介质体系内渗流场、岩体地应力场和地温场耦合的非线性动力学模型。