The first total synthesis of (±)-annosqualine by means of oxidative enamide-phenol coupling: pronounced effect of phenoxide formation on the phenol oxidation mechanism

The first total synthesis of a spiro-isoquinoline alkaloid, (±)-annosqualine, was established by employing an enamide-phenol coupling of a 1-methylene-1,2,3,4-tetrahydroisoquinoline derivative with a hypervalent iodine reagent, where the formation of the phenoxide was recognized to be an essential step for the reaction of the phenolic hydroxyl group with the hypervalent iodine reagent leading to the formation of the desired product.     

Effect of structural variation within cationic azo-surfactant upon photoresponsive function in aqueous solution

The cationic azo-surfactants possessing different spacers and tail alkyl chain lengths have been synthesized by azocoupling ofp-alkylaniline orop-ethoxyaniline with phenol, followed by alkylation and quaternalization with dibromoalkane and trimethylamine, respectively. These surfactants showed a good solubility in water. A reversibletrans-cis isomerization of the azosurfactants by photoirradiation was assessed by UV-Vis absorption spectra. Due to a difference in HLB between thetrans- andcis-surfactants, the observed critical micelle concentration (CMC) values and the electric conductivity of the surfactant solution at above the CMC were significantly affected by the photoinducedtrans-cis isomerization. The azo-surfactants bearing moderate alkyl chain lengths such as surfactants 6 (R₂=C₂H₄, R₃=C₄H₉) and 9 (R₂=C₄H₈, R₃=C₂H₅) were found to be effective to achieve large CMC changes (3.6 mmol/L for 6 and 5.9 mmol/L for 9) by UV-light irradiation. The replacement of the tail chain species also affected the photoresponsive function. The surfactant 12, possessingp-ethoxy group as the tail chain, was found to form a stable micelle aggregation as compared with the structurally related surfactant 10 having ethyl unit as its tail group, but it exhibited a large CMC change (5.3 mmol/L) by UV-light irradiation.     

生长素对乔纳金苹果试管苗生根的影响

以三倍体苹果品种乔纳金试管苗顶部茎段为试材，将其接种于添加不同生长素及其组合的MS(基本培养基)中，研究IAA、IBA、NAA 3种生长素对苹果试管苗生根的不同效应。结果表明：3种生长素均可诱导乔纳金试管苗生根，且组合处理的效应普遍优于单种激素，其中以MS IBA 0．8mg／L IAA 0．7mg／L为最好，其生根率达92％。     

带作用的群系的临界结构

在本文中，我们讨论了带作用群的群系的临界结构，给出了处理允许某些作用群的群的问题的一般方法，作为应用，我们特别给出了关于幂零群及ｐ－幂零群的一些结果。     

Coupled lubrication and Stokes flow finite elements

A method is developed for performing a local reduction of the governing physics for fluid problems with domains that contain a combination of narrow and non‐narrow regions, and the computational accuracy and performance of the method are measured. In the narrow regions of the domain, where the fluid is assumed to have no inertia and the domain height and curvature are assumed small, lubrication, or Reynolds, theory is used locally to reduce the two‐dimensional Navier–Stokes equations to the one‐dimensional Reynolds equation while retaining a high degree of accuracy in the overall solution. The Reynolds equation is coupled to the governing momentum and mass equations of the non‐narrow region with boundary conditions on the mass and momentum flux. The localized reduction technique, termed ‘stitching,’ is demonstrated on Stokes flow for various geometries of the hydrodynamic journal bearing—a non‐trivial test problem for which a known analytical solution is available. The computational advantage of the coupled Stokes–Reynolds method is illustrated on an industrially applicable fully‐flooded deformable‐roll coating example. The examples in this paper are limited to two‐dimensional Stokes flow, but extension to three‐dimensional and Navier–Stokes flow is possible. Copyright © 2003 John Wiley & Sons, Ltd.     

成像公式法测量望远镜放大倍数

介绍用成像公式法测量望远镜放大倍数的方法,并对这种测量方法进行改进提高测量的精确度.     

On the Donor Ability of the Phosphaneiminato Substituent and Cube Formation with Transition Metal Fragments

The particular role of the phosphaneiminato ligand as a donor is investigated for a) nitrenes (phosphinidenes) and carbenes and b) cubane formation with transition metals. Accordingly, and as shown for the case a) the ligand is a stronger π‐donor than an amino group and can be considered as a special case of imine‐type substituents. The latter are very effective in π‐donation. In the case b), i.e. the cubane formation with transition metals, one has to consider transition metals with a partially or completely filled d‐shell (with electrons). Hence depending on the transition metal, cubanes are build with weak ferromagnetic coupled or closed shell systems. For the cubanes with closed shell character the matter of insertion of halide anions is discussed. In the last chapter of the review the bond stretching in the dithionitrosyl complexes with rhenium is characterized.     

等厚双层涂层材料受集中力作用的平面问题理论解

界面应力的正确评价是分析薄膜涂层材料力学特性的难题之一。利用镜像点法和Dirichlet等值性原理，本文推导了等厚双层薄膜涂层材料受表面集中力作用的平面问题理论解。该显式理论解是以固定在各镜像点上的局部坐标系下的Goursat应力函数的形式给出的。对应于高阶镜像点的应力函数，可通过递推的方法，从对应于低阶镜像点的应力函数求得，而且也易于计算机编程。随着镜像点阶数的增大，它与界面的距离也越来越大，因而相对应的应力函数对界面应力的影响越来越小。最后的算例表明，只需考虑前面有限个镜像点，便可获得足够精度的解。该理论解可作为格林函数，以求解复杂问题的理论解，也可用作边界元法的基本解，提高数值计算的精度和效率。     

氘代聚合物膜靶制备技术与性能研究

 氘代聚合物膜是快点火基础物理实验的一种重要靶型。通过氘代苯乙烯单体的本体自由基聚合反应制备氘代聚苯乙烯，并利用流延法和浇铸法制备出厚度从几十nm到数百μm的膜靶。溶剂挥发过程中的随机扰动对膜厚均匀性造成影响，采用清洁的基片和在涂沫基片或模具外加防护罩可以降低这种影响。采用PVA作脱膜剂有利于获得较薄的聚合物薄膜。DSC分析表明薄膜的玻璃化转变温度与热处理过程有关，缓慢退火有利于提高Ｔ-g和储能模量。     

SURFACE METALLIZATION OF CENOSPHERES AND PRECIPITATORS BY ELECTROLESS PLATING

This paper reports the use of a colloidal Pd^0 catalysis system to metallize the surface of precipitators separated from coal fly-ash, and metals such as Cu, Ni etc. are deposited on the precipitators surface. Alternatively, according to the characteristic surface of cenospheres, an Ag coating catalysis system is adopted to first deposit Ag on the cenospheres surface, followed, if necessary, by the deposition of other metals such as Cu, Ni, etc. on the Ag coating to produce monolayer and multilayer metal-coated cenospheres. The surface characteristics and the morphologies of the metal coatings are examined in detail with scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) techniques. It can be shown that the quality of metal coatings derived from the Aa coatina catalysis system, is better than that of the colloidal Pd^0 catalysis system.