Topographical properties of polymer films deposited in capillaries for electrophoretic separations of large organic molecules

Topography and thickness of hydrophilic polymer coatings of fused-silica capillaries for capillary electrophoresis (CE) were investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), and profilometry. Three hydrogels, poly(2-hydroxyethyl methacrylate) [poly(HEMA)], poly(diethylene glycol monomethacrylate) [poly(DEGMA)], and poly(triethylene glycol monomethacrylate) [poly(TEGMA)], were deposited using two procedures, either by simple physical sorption of the polymers, or by derivatization of the capillary wall surface with glycidyl methacrylate (EPMA) followed by polymerization of the appropriate monomers. The performance of the modified capillaries was tested under CE conditions (decrease in the electroosmotic flow, EOF dependence on pH, separation of milk and standard proteins). It has been found that the most important property of the polymer coating is its thickness, whereas its topography and the degree of its hydrophobicity are less significant. Film deposition by physical adsorption is preferable to polymerization on the derivatized surface.     

Thermochemical study of aliphatic and phenyl-substituted geminal diacetates

The standard enthalpies of combustion _c H ^o of aliphatic diacetates1 and aromatic diacetates2 were measured calorimetrically. The enthalpies of vaporization _vap H ^o or sublimation _sub H ^o of1 and2 were obtained from the temperature function of the vapor pressure measured in a flow system. From _f H ^o(g) of1 and2 new values of group increments for the estimation of standard enthalpies of formation of these classes of compounds were derived. The geminal interaction energy between the geminal acyloxy groups shows no anomeric stabilization.Geminal Substituent Effects, Part 12, for part 11 see Ref. 7.     

不同添加物对表面活性剂溶液预胶束形成的影响

关于表面活性剂溶液中预胶束的形成问题已有不少报道［’－‘］．预胶束是表面活性剂溶液在浓度很稀时（远小于其临界胶束浓度（CMC》、表面活性分子所形成的一种集合体·由于一般的物理化学方法对其难于捡出，因此常被研究者忽略．文献间曾指出：预胶束形成的驱动力与胶束一样，也是疏水作用所致．因此表面活性分子的链长、头部极性、溶剂性质以及添加物的引入等因素必然会影响预胶束的形成．本工作是对添加物的引入问题所作的初步研究·。作中所研究的阴离子表面活性剂有十二烷基硫酸钠（sss）·＋”烷基；Iv酸钠（5％）和十六烷基硫酸…     

Physicochemical characterization of biological glass coatings

Metallic implants are widely used in orthopaedic surgery but metal release has been reported by several authors. High metallic ion concentration in surrounding tissues may play a major role in therapeutic failure. We have investigated in vivo and in vitro two biological glasses (BVA and BVH) used as coatings of metal implants. Physicochemical characterization was made by several complementary methods, particularly particle induced x‐ray emission (PIXE) and energy‐dispersive x‐ray spectroscopy (EDXS) associated with electronic microscopy. Analyses clearly show the differences of behaviour between both glasses. The BVA glass is bioactive, i.e. it develops a direct chemical bond between prosthesis and bone by the formation of a calcium phosphate layer at its surface. These structural and compositional modifications are caused by hydrolysis of the glass. After its dissolution BVA glass is replaced by bone, which ensures better integration of the implant in the bone site. The BVH glass is not bioactive and is used as a cement to isolate the metal implant from the biological environment, but the coating disaggregates with implantation time and glass grains migrate through the bony lacuna network. Copyright © 2003 John Wiley & Sons, Ltd.     

Delphinidin–Aluminum(III) Complexes in Aqueous and Non-Aqueous Media: Spectroscopic Characterization and Theoretical Study

Summary. The study of delphinidin complexation with trivalent aluminum in acidic aqueous buffered (pH 3.0 and 3.8) and methanolic solutions was performed utilizing electronic absorption spectroscopy and quantum chemical calculations. In its structure delphinidin possesses several chelating sites in competition towards aluminum(III). Molar ratio plots denoted the formation of only one aluminum(III):delphinidin complex of stoichiometry of 1:1 in both investigated media. Semiempirical calculations, performed at the restricted HF AM1 level, enabled the determination of the structural features of free delphinidin and structural modifications caused by chelation of aluminum(III). Considering the pigment molecular structure and the results of the theoretical calculations it is possible to equally implicate C3′–C4′ and C4′–C5′ hydroxyl groups as those with the predominant chelating power.     

Catalytic activity of silica in ozone formation in electrical discharges

The catalytic action of granular silica packing on ozone formation has been observed under discharge conditions. Using a glass ozonizer with a metal high-voltage electrode, at a frequency of 400 Hz it was possible to obtain much higher ozone concentrations in the presence q( silica than without packing, with the same total energy consumption. The dependence between ozone production and energy efficiency is considered, and conditions of the optimum ozonizer run are discussed. It is shown that in the all-glass ozonizer with a narrow discharge gap, the ozone concentration may be as high as 6.5% (ca. 130g O₃/m³) when silica packing is applied.     

Preparation and properties of SiO2-TiO2 thin films from silicic acid and titanium tetrachloride

The preparation of SiO₂-TiO₂ thin films by the sol-gel method using silicic acid and titanium tetrachloride as starting materials was studied. The homogeneous sols were obtained by the condensation reaction of silicic acid with titanium tetrachloride in methanol-tetrahydrofuran. The dipcoating of slide glasses and silicon wafers followed by heat treatment gave oxide thin films of 88–93% transmittance, 3000–4500 Å thickness, and 1.45–1.80 refractive index, depending on heat-treatment temperature and TiO₂ content. FT-IR measurement showed that the Si-O-Ti bond is formed even in the sol and films. The variations of film thickness and refractive index on transformation from the gels into the oxides were found to be quite low.     

稀土高氯酸盐-谷氨酸配合物[Pr2(L-α-Glu)2(ClO4)(H2O)7](ClO4)3•4H2O的低温热容和热化学研究

合成了一种稀土高氯酸盐-谷氨酸配合物. 经TG/DTG、化学和元素分析、FTIR及与相关文献对比, 确定其组成为[Pr₂(L-α-Glu)₂(ClO₄)(H₂O)₇](ClO₄)₃•4H₂O, 纯度为99.0%以上. 利用显微熔点仪分析发现其没有熔点. 在78～370 K温区, 用精密绝热量热仪测量其低温热容, 在285～306 K温区发现一明显吸热峰, 归结为固-固相变过程. 通过相变温区三次重复热容测量, 得到相变温度T_tr、相变焓Δ_trH_m和相变熵Δ_trS_m分别为(297.158±0.280) K, (12.338±0.016) kJ•mol^－1和(41.520±0.156) J•K^－1•mol^－1. 用最小二乘法将非相变温区的热容对温度进行拟合, 得到了热容随温度变化的两个多项式方程. 用此方程进行数值积分, 得到每隔5 K的舒平热容值和相对于273.15 K的热力学函数值. 根据TG/DTG结果, 推测了该配合物的热分解机理. 依据Hess定律, 选择1 mol•dm^－3盐酸为量热溶剂, 利用等温环境溶解-反应量热计, 测定了该配合物的标准摩尔生成焓为: Δ_fH_m⁰＝－(7223.1±2.4) kJ•mol^－1.     

用CR传输线模型研究涂层/金属体系阻抗谱

根据CR传输线模型和QR电路之间的关系,建立了拟合其初值的计算方法,借助Z-View软件,可求得各元件精确值.根据电容（Ci）和电阻（Ri）随特征频率（f*）的分布,推导了元件相对增量与恒相位角元件（Q）指数参数n的关系. 结果表明, 当n小于0.5时,Ci比Ri增加得更快,从新的角度说明了n的物理意义及其和界面脱层之间的关系.作为应用实例,拟合了不同特征的电化学阻抗谱,分析了有机涂层/金属腐蚀体系阻抗变化的具体过程,区分了点蚀和脱层因素对阻抗谱的影响,从高阻抗体系同时得到了与不同空隙率有关的涂层电容和电阻值,并根据涂层体系的不均匀特征探讨了模型结构的物理意义.     

STUDIES OF THE HOMOLOGATION OF METHANE ONSUPPORTED TRANSITION METAL CATALYSTS

Introduction0ncofthcintriguingpr0blcmsinhctcrogcncouscatal}'sisisthcactit'ationanddircctconversionofmcthancintoliquidfucIanduscful.h..i..l,lllMcthancactivationisvcry'difficultbccauscn1cthancisathcrmod}'namicalI}'stablccompoundt`ithanoblcgas-likcconfigurati0nThcvcry'strongtctrahcdralC-Hbonds(435kJ/mol)offcrnofiJnctionalgroups,magncticm0mcnts'orpolardistortionstofacilitatcchcmicalattackThismakcsmcthanelcssrcactivcthanncarl}'allitsconvcrsionproducts.Rccentl}'oxidativccouplinghasbecnconsidcrcda…