多晶3C-SiC薄层的淀积生长及结构性能分析

采用ＨＦＣＶＤ生长法,以较低生长温度,在Ｓｉ（１１１）衬底上淀积３Ｃ－ＳｉＣ（１１１）薄层。用ＸＲＤ、ＶＡＳＥ、ＸＰＳ等分析手段研究了薄层的结构、光学常数、组分及化学键等性能。ＸＲＤ显示薄层具有明显的择优取向特征。ＶＡＳＥ测量出薄层的折射率为２．６８６,光学常数随深度的变化曲线反映出薄层的多层结构。ＸＰＳ深度剖面曲线表明薄层中Ｓｉ／Ｃ原子比符合ＳｉＣ的理想化学计量比,其能谱证明Ｃ１ｓ与Ｓｉ２ｐ成键形成具有闪锌矿结构的３Ｃ－ＳｉＣ。     

不均匀场中静磁波的传播和导波光衍射效应

理论分析了磁光薄膜垂直不均匀静磁场对静磁波以及导波光衍射效率的影响,并以抛物线分布的不均匀磁场为例对Ｂｉ：ＹＩＧ薄膜波导进行了计算,计算表明,在适当分布的不均匀场作用下,与均匀磁场情形相比,波导中传播的静磁波振幅以及导波光的衍射效率都有显著增加。     

新法制备高亮度蓝色SrS∶Ce薄膜电致发光器件

以ＳｒＳ∶Ｃｅ和ＺｎＳ的混晶为原料用电子束蒸发的方法制备了蓝色ＳｒＳ∶Ｃｅ薄膜电致发光（ＴＦＥＬ）器件,研究了新法制备的ＳｒＳ∶Ｃｅ膜的光致发光（ＰＬ）性能和它的电致发光（ＥＬ）器件的电致发光性能,并与直接用ＳｒＳ∶Ｃｅ粉末制备的薄膜和器材的性能进行了对比．结果表明混晶法制备的薄膜电致发光器件的亮度和效率比直接法制备的器件要高得多,且ＺｎＳ的引入弥补了在ＳｒＳ∶Ｃｅ薄膜Ｓ的不足,避免了直接用ＳｒＳ∶Ｃｅ材料蒸发而采用的共Ｓ蒸发方法中Ｓ气氛对环境的污染．     

弱酸性介质中Silicalite—1分子筛膜的制备与表征

在ＳｉＯ２－ＴＰＡＢｒ－ＮＨ４Ｆ－Ｈ２Ｏ弱酸性氟离子体系中,在玻璃基片上采用水热晶化法制备了Ｓｉｌｉｃａｌｉｔｅ－１（全硅ＺＳＭ－５）分子筛膜．通过ＸＲＤ,ＳＥＭ分析测试手段对所合成的分子筛膜进行了表征,并对膜合成中硅源,水量等影响因素进行了考察．     

前驱体溶液pH值对溶胶凝胶制备钛酸铋薄膜的影响

采用溶胶凝胶技术在石英玻璃基片上制备钛酸铋薄膜,讨论了前驱体溶液的酸碱度（ｐＨ值）对薄膜结构和结晶性的影响．ｐＨ＜２和ｐＨ＞３５的前驱体溶液所制备的薄膜在晶化过程中出现Ｂｉ２Ｔｉ２Ｏ７和Ｂｉ２Ｔｉ４Ｏ１１杂相．ｐＨ＝２５～３５的前驱体溶液制备的薄膜是钙钛矿Ｂｉ４Ｔｉ３Ｏ１２结构的取向薄膜     

Electroless preparation and electrochemical behavior of a platinum-doped nickel hexacyanoferrate film–zinc modified electrode: catalytic ability of the electrode for electrooxidation of methanol

The use of a zinc substrate as an electrode and the modification of its surface by means of a thin film of platinum-doped nickel hexacyanoferrate (Pt-NiHCF) were developed. The modification conditions of the zinc surface including the electroless deposition of metallic nickel on the electrode surface from NiCl₂ solution, chemical derivatization of the deposited nickel to the NiHCF film in 0.5 M K₃[Fe(CN)₆] solution, and electrochemical penetration of metallic platinum into the modified film are described. The modified zinc electrodes prepared under optimum conditions show a well-defined redox couple due to the [Ni^IIFe^III/II(CN)₆]^1–/2– system. The effects of pH, the alkali metal cation, and the anion of the supporting electrolyte on the electrochemical characteristics of the modified electrode were studied in detail. The diffusion coefficients of hydrated alkali metal cations in the film (D), the transfer coefficient (), and the transfer rate constant for the electron (k_s) were calculated in the presence of some alkali metal cations. The electrocatalytic activity of the modified electrode for methanol oxidation was demonstrated. The stability of the modified electrode under various experimental conditions was investigated.     

医用聚氯乙烯膜的等离子体表面改性

用两种不同气氛的辉光放电等离子体工艺对医用软质聚氯乙烯（ＰＶＣ）膜进行了表面改性研究。结果表明，聚合性气氛的等离子体改性效果明显优于非聚合性气氛。平整致密的聚合膜对ＰＶＣ增塑剂——邻苯二甲酸二辛酯的迁移和扩散起了阻挡作用，也使膜表面亲水性和表面张力极性成份增大，液固相界面张力减小，生物相容性得以改善。     

Electropolymerized Pyrrole‐Substituted Manganese Phthalocyanine Films for the Electroassisted Biomimetic Catalytic Reduction of Molecular Oxygen

We report for the first time on the electroassisted biomimetic activation of molecular oxygen by a newly prepared electropolymerized polypyrrole‐manganese phthalocyanine film. The prepared films and their intervention in the electroassisted catalytic reduction of molecular oxygen were analyzed by cyclic voltammetry and UV‐visible spectrophotometry on optically transparent electrodes. The obtained results demonstrate the probable existence of the key‐steps responsible for the suggested formation of the highly reactive manganese oxo intermediate.     

Preparation and Characteristics of Porous Silica Films by a Modified Base-Catalyzed Sol-Gel Process Containing PVA: II. Film Preparation

Porous SiO₂ films were successfully deposited on silicon substrates by a modified base-catalyzed Sol-Gel process (MBCP) containing polyvinyl alcohol (PVA). The process conditions, such as the gelation time, the synthesis temperature, the stabilizing agent of the precursor solution and the spin coating speed, the heat-treatment, the annealing temperature of the film on the microstructure and porosity of porous SiO₂ films were systematically investigated by SEM, XRD and ellipsometry techniques. This study provides a novel preparation technique for the porous SiO₂ film. Using this process, the resultant film can reach a thickness of 3.6 m for one layer, a porosity of 25–50%, a low thermal conductivity of 0.11 W/m·K. This film will be used as a low dielectric layer, an thermal-insulating layer and a low refractive index layer.     

Chiral stationary phases for LC and SFC obtained by “Polymer coating”

Summary Chirally substituted Si–H-containing polysiloxanes were synthesized, which can be immobilized on small particle silica gel as well as on the smooth surfaces of fused silica capillaries. Immobilization is achieved either by crosslinking or by chemical bonding to the surfaces via silanol groups; both reactions can only be performed by addition of H₂PtCl₆, which acts as catalyst for hydrosilylation and as stoichiometric reagent for crosslinking. Chiral substituents of systematically varied chemical structure were introduced into the polysiloxanes by hydrosilylation. The mechanism of immobilization was investigated by spectroscopic methods, notably²⁹Si-NMR. Homogenous stationary-phase coatings of variable film thickness and corresponding retentivity can easily be achieved. The enantioselectivity of the phase systems was characterized in dependency on the chemical structure of the chiral selectors attached to the polysiloxane chain of the chiral stationary phases and also in terms of the functional groups introduced into the solutes by derivatisation.