416例湘西苗族学生手纹研究

<正>皮纹是人体稳定的体表特征.它的各种性状具有遗传特征,种族差异和民族差异,并且在刑侦及其某些遗传性疾病的诊断中起重要作用.为积累我国各民族正常群体的皮纹学参数值,为人类学、遗传学及临床医学等相关研究提供正常对照数据,我们对416例湘西苗族学生的手纹进行了研究,为了对照分析,引用了有关文献.     

兖州高硫煤的加氢热解脱硫及脱硫动力学

在加压热天平上，考察了氢气和氮扬气氛下高硫煤的热解脱硫。利用气相色谱在线分析研究了硫化氢氢气的逸出规律。结果表明，加氢热解比氮气下的热解有着更显著的脱友作用，脱硫率可达９０％以上。而且加氢热解下６５％的脱除硫转化为气相硫化氢，而氮气下热解是有８０％的硫转化为液相。     

外加无机电解质对煤浆性质调控作用的研究

考察了数种无机电解质对煤浆分散体系流变特性的影响。结果发现，煤浆的流变特性不仅与电解质种类有关，还取决于煤质特征。某些煤适，适量的无机电解质可使浆体的屈报胀塑料转化为屈服假塑性。     

甲基丙烯酸全氟烷基代乙酯对天然橡胶乳液辐射改性研究

天然橡胶的性能与其组成中的C C双键有密切关系,由于C C双键的存在,为天然橡胶的改性提供了便利,大多数天然橡胶的改性方法,如氯化、氢氯化、环化、环氧化、接枝共聚等皆是建立在这一思路基础上的.White等[1]认为接枝天然橡胶的目的是提高天然橡胶的机械强度,赋予特殊的功能.作     

不同常压流化床煤气化方案的模型预测 Ⅰ. 模型建立及验证

为评价不同气化方案对常压流化床气化的影响，从化学动力学角度并结合化学平衡建立了流化床气化模型，该模型考虑了煤热解和气化所经历的各反应过程。模型预测结果与文献报道的试验数据吻合较好，气化组分的平方误差和在10%左右，表明该模型可以用来预测各种气化方案对常压流化床气化的气化过程、生成煤气组分和气化效率等方面的影响。     

Conductive polyethylene-carbon black composites by elongational-flow injection molding Part 3. Study of the structure and morphology

The morphology and structure of high molecular weight linear polyethylene (M _w 450000) filled with carbon black and processed using molds that introduce an elongational flow component during injection molding has been examined using electron microscopy and x-ray diffraction techniques. The study of fracture surfaces reveals the display of shish-kebabs oriented along the injection direction with segregated longitudinal channels of carbon black particles. Molecular and lamellar changes in orientation are, furthermore, studied across the thickness of the moldings. It is shown that addition of carbon black particles to injection-molded polyethylene induces significant changes in lamellar orientation. Thus, while lamellar overgrowth proceeds perpendicular to the fiber axes within carbon free channels, lamellae grow randomly within carbon-enriched regions where flow is less pronounced.     

Characterization of Ultrathin Films of Cellulose Esters

The adsorption of cellulose acetate (CA), cellulose acetate propionate (CAP) and cellulose acetate butyrate (CAB) from solutions prepared in acetone onto silicon wafers led to ultrathin films, which were characterized by ellipsometry, atomic force microscopy (AFM) and contact angle measurements. The polysaccharides films were characterized in the air just after their formation and after annealing at temperatures higher than their glass transition temperature or melt temperature. The films thickness close to 2 nm and surface roughness did not vary significantly upon annealing. AFM images revealed the presence of small clumps dispersed on a homogeneous layer, which covered completely the Si wafers. Such topographic details were also observed after annealing. However, upon annealing the films surfaces changed from hydrophilic to hydrophobic, evidencing molecular re-orientation at the solid–air interface. The adhesion of bovine serum albumin (BSA) and lipase onto the cellulose esters films was quantified in order to evaluate the possibility of applying such films as selective support for biomolecules.     

接触角法研究医用聚醚聚氨酯材料表面自由能与界面自由能

<正> 表面性质在医用材料与生物体的相互作用中起着至关重要的作用,如血液相容性材料的表面对血细胞具有吸附、变形、凝血、溶血等作用。表面能和界面能是医用材料的重要研究内容之一,材料的表面能及其极性与非极性分量在影响或控制材料与生物体的相互作用之面一直是医用材料的重要课题。Raier曾提出当材料的临界表面张力在20-30erg/cm~2时,血液相容性好,也有人认为,血液与材料的界面自由能趋于零时,才能     

平朔气煤的煤岩显微组分结构研究

用显微光度计、扫描电子显微镜(SEM)、傅立叶变换红外光谱(FTIR)、X射线衍射光谱(XRD)和X光电子能谱(XPS)等测试手段研究了平朔气煤的等密度梯度离心分离(DGC)显微组分富集物的结构。结果表明,镜质组和稳定组结构相似,含氧基团基本相同,但丝质组结构则不同,它含有较多的羧基和羰基。根据实验结果讨论了三种显微组分的大分子结构,认为它们是由许多结构相似而又不相同的结构单元所构成。镜质组和稳定组的单元核心主要为脂环、缩聚芳环,环数为5—6个;丝质组单元核心主要为缩聚芳环,环数为7—8个,环缩合程度最高,芳香层片在空间排列规则,相互定向程度大。     

内蒙风化煤对镉离子溶液的吸附行为

本文利用内蒙风化煤[1,3]作吸附剂对镉离子溶液中的镉的吸附性能、特征和机理进行探索,以利内蒙风化煤的深度开发利用。1　实验内蒙风化煤(腐植酸含量高达41 3%)。空气中风干研细后,过80目筛。用3ＣｄＳＯ4·8Ｈ2Ｏ和Ｈ2ＳＯ4配制含Ｃｄ(Ⅱ)酸性溶液[4],镉含量采用ＡＡ 670原子吸收分光光度法(日本岛津)测定。吸附实验采用静态分析方法。准确称取一定量的风化煤放入干燥的250ｍｌ锥形瓶中,加入25ｍｌ一定浓度的含镉溶液,在室温下连续振荡2ｈ,静置0 5ｈ,过滤,分析滤液中的镉含量。取6ｇ内蒙风化煤于250ｍｌ磨口锥形瓶中,移入25ｍｌ1000ｍ…