Φ12LMQ型钢筋冷拉机原理及主要参数选择

介绍了一种新型钢筋冷拉机的工作原理和主要参数：变形速度Ｖ△Ｌ、单位时间伸长率ε、送进速度Ｖ２、冷拉速度Ｖ１及其之间的关系．这种冷拉机具有生产率高、冷拉质量稳定等特点．     

Molecular Orbital Calculations on 2, 4, 6-Trinitrotoluene

Three ab initio calculations (HF/6-3IG, HF/6-3IG*, and HF/6-3IG**) on 2,4,6-trinitrotoluene were made, The results compare well with xray data, except dihedral angles of NO₂ relative to the plane of the benzene ring. The deviations are attributed to packing forces and steric effects in the crystal. The most stable structure was a torsional angle 10° of the methyl top with the benzene ring, unlike toluene. The rotational barriers of the methyl top and the 4-nitro group are small. Hydrogen bonding, dipole moments and total atomic charges arc calculated.     

RSCRR空间5杆变角机构的结构和几种位置分析方法

本文对有名的 RSCRR 空间5杆变角机构进行了结构分析,进而用4种不同的方法对其进行位置分析,得出了相同的结论,证明了机构输出角δ与输入角α的关系是δ:arcsin[ctgλtg(arcctg((a/e)+cisa)/(sina))],并用实例证明了结论的正确。     

用样条配点求解反对称角铺设层合板的瞬态响应

应用样条配点法以三次 B样条函数为时域函数的试函数 ,求解了反对称角铺设层合板的动力响应问题。在若干算例中 ,对于各种边界 ,选择样条函数作为振型函数 ,用样条配点法求出了结构的动力响应量 ,并与 Newmark法进行了比较。     

掷铁饼时转轴的形成与角动量关系浅折

掷铁饼的旋转动作是角运动（运动员绕纵轴或接近纵向的轴旋转）与水平运动（重心在投掷圈内向前移动）的结合。本文主要阐述：怎样利用人体旋转时转轴的变化，形成合理的旋转投掷半径，取得最大限度的旋转角度，从而使整个投掷过程获得理想的角动量。     

斜孔气膜冷却数值模拟分析

本文通过数值模拟分析圆柱孔和扩散孔的单斜孔气膜冷却特性,考察复合角、孔型和吹风比对流场和气膜冷却效果的影响。结果表明,复合角的引入使气膜侧向分布更宽,但冷却效果沿主流方向衰减更快。适中吹风比得到的气膜能更有效的保护壁面。在相同吹风比和复合角条件下,扩散孔的气膜冷却效率比圆柱孔更好,且冷却更为均匀持久。     

激光标线的原理和实验

根据几何光学知识分析了激光标线原理.理论和实验表明:激光标线长度与激光光束形状、光学元件形状及材料折射率有关.并讨论了激光标线向两侧扩展的原因.     

X-ray metrology for advanced silicon processes

X-ray reflectivity (XRR), X-ray fluorescence (XRF) and small angle X-ray scattering (SAXS) techniques are used to the monitoring of Cu/porous low κ processes, which are developed for the next generation (≤65 nm) integrated circuits. Sensitivity of XRR and XRF is sufficient to detect drifts of the copper barrier layer, copper seed layer and Cu CMP (chemical-mechanical polishing) processes. Their metrology key parameters comply with production requirements. SAXS allows determining the pore structure of low κ films: average pore size and pore size distribution.     

具有许用传动角和最显著急回特性的平面曲柄滑块机构设计

以“辅助角方法”为理论基础 ,提出并解决了按一并具有许用传动角 [γ]和最显著急回特性Kmax之条件设计平面曲柄滑块机构的理论课题 .     

Surface free energy of CrNx films deposited using closed field unbalanced magnetron sputtering

CrN_x thin films have attracted much attention for semiconductor IC packaging molding dies and forming tools due to their excellent hardness, thermal stability and non-sticking properties (low surface free energy). However, few data has been published on the surface free energy (SFE) of CrN_x films at temperatures in the range 20-170 °C. In this study CrN_x thin films with CrN, Cr(N), Cr₂N (and mixture of these phases) were prepared using closed field unbalanced magnetron sputtering at a wide range of Cr⁺² emission intensity. The contact angles of water, di-iodomethane and ethylene glycol on the coated surfaces were measured at temperatures in the range 20-170 °C using a Dataphysics OCA-20 contact angle analyzer. The surface free energy of the CrN_x films and their components (e.g., dispersion, polar) were calculated using the Owens-Wendt geometric mean approach. The influences of CrN_x film surface roughness and microstructure on the surface free energy were investigated by atomic force microscopy (AFM) and X-ray diffraction (XRD), respectively. The experimental results showed that the lowest total SFE was obtained corresponding to CrN at temperature in 20 °C. This is lower than that of Cr(N), Cr₂N (and mixture of these phases). The total SFE, dispersive SFE and polar SFE of CrN_x films decreased with increasing surface temperature. The film roughness has an obvious effect on the SFE and there is tendency for the SFE to increase with increasing film surface roughness.