CMW1型外铲磨机PC控制及应用

研究铲磨机各种运动和控制要求，设计出继电控制与ＰＣ控制相结合的电气控制系统。此系统在电路设计、电气柜安装、调试维修和操作等方面满足了设计要求。铲磨加工过程的ＰＣ控制解决了转轮流道三维表面成形运动的控制难题。ＰＣ控制程序基本满足了铲磨工艺要求。     

Vibrational control of crystal growth from liquid phase

Modeling and numerical simulations of the convective flows induced by the vibration of the monocrystal during crystal growth have been performed for two configurations simulating the Cz and FZ methods. This permitted to emphasize the role of different vibrational mechanisms in the formation of the average flows. It is shown that an appropriate combination of these mechanisms can be used to counteract the usual convective flows (buoyancy- and/or thermocapillary-driven) inherent to crystal growth processes from the liquid phase. While vibrational convection is rather complex due to these identified mechanisms, the new modeling used in the present paper opens up very promising perspectives to efficiently control heat and mass transfer during real industrial applications of crystal growth from the liquid phase.     

提高微波功率源性能的一种新型控制系统

本控制系统用于抑制大功率速调管输出微波功率宏脉冲平顶波纹,改善电子直线加速器输出束流的品质.控制方法采用微分线性逼近和矩阵算法对系统的输入和输出进行分析,求出代表系统响应的传输矩阵,从而将复杂的激励一响应计算转化为简单的代数运算.实验结果显示出宏脉冲平项波纹得到了有效抑制,说明采用自适应前馈控制来获得平坦的宏脉冲平顶是切实可行的.     

混沌的模糊神经网络逆系统控制

提出用Sugeno型的模糊推理神经网络建立混沌系统的逆系统模型,并采用逆系统方法进行混沌的控制.这种方法的特点是可以不必建立混沌系统的解析模型,通过模糊神经网络学习混沌系统的运动规律,通过学习获得的规律对混沌进行有效的控制,并且该控制方法可以控制混沌系统以一定精度跟踪连续变化的给定信号.理论分析及针对虫口模型和Henon模型仿真研究证明了该方法的有效性 关键词： 混沌 模糊神经网络 逆系统控制     

Application of stochastic optimal control to the suboptimal design of thrust-mass profiles

Stochastic optimal control techniques are applied to compare the performance of identical medium-range air-to-air missiles which have different thrust-mass profiles. The measure of the performance is the probability of reaching a lock-on-point with a favorable range of guidance and flight parameters, during a fixed time interval [0,t _f ], given that, during the flight, the trajectories of the missile are subjected to a variety of constraints including dynamic pressure constraints.     

柔性变截面滑移式机械手的控制

研究了柔性变截面滑移式机械手臂的控制。首先，基于有限元法导出系统的动力学方程，然后分别建立了两种控制方式的状态方程：１）以加速度和角加速度作为控制变量：２）以力和力矩作为控制变量。控制过程分为“粗控”和“精控”两步进行。“精控”过程采用线性二次型高斯控制。最后给出了数值模拟的结果。     

生料配料系统的回归-校正控制方法研究

针对通常生料配料系统所出现的问题,提出了对生料配料过程进行多目标综合控制的基本思想,在这一基础上,给出了控制生料饱和参数、生料成分的系统控制结构,并着重论述了饱和系数回归分析与回归控制及成分校正控制的原理、模型与方法。     

W-算子在设计电气传动控制系统中的应用

本文利用作者最近提出的一种新的算子方法——W-算子方法,从理论和应用方面探讨了电气传动控制系统的设计问题,并对算法的收敛性进行了分析。该算法具有结构简单,算法严密,计算方便的特点,避免了实际应用中用传统最优控制方法设计所带来的困难。     

“Slow” active control of combustion instabilities by modification of liquid fuel spray properties

This paper describes an experimental investigation of the feasibility of using “slow” active control approaches, which “instantaneously” change liquid fuel spray properties, to suppress combustion instabilities. The objective of this control approach was to break up the feedback between the combustion process heat release and combustor pressure oscillations that drive the instability by changing the characteristics of the combustion process (e.g., the characteristic combustion time). To demonstrate the feasibility of such control, this study used a proprietary fuel injector (Nanomiser^TM), which can vary its fuel spray properties, to investigate the dependence of acoustics–combustion process coupling, i.e., the driving of combustion instabilities, upon the fuel spray properties. This study showed that by changing the spray characteristics it is possible to significantly damp combustion instabilities. Furthermore, using combustion zone chemiluminescence distributions, which were obtained by Abel’s deconvolution synchronized with measured acoustic data, it has been shown that the instabilities were mostly driven midway between the combustor centerline and wall, a short distance downstream from the flame holder, where the mean axial flow velocity is approximately zero in the vortex near the flame holder. The results of this study strongly suggest that a “slow” active control system that employs controllable fuel injectors could be effectively used to prevent the onset of detrimental combustion instabilities.     

拟线性椭圆变分不等式的障碍最优控制问题

对拟线性椭圆变分不等式的障碍最优控制问题(即以障碍为控制变量)进行了研究．指标泛函为Lagrange型,其中含有控制变量二阶导数的p次幂,这使得最优性条件的推导颇为不易．对所考虑的问题给出了最优控制的存在性定理以及必要条件．