一种Cr─Mo─V冷轧辊钢回火工艺参数的研究

利用光学显微镜和电子显微镜对一种Cr－Mo－V冷轧辊钢淬火后的回火组织进行了观察．通过Hollomon关系式建立了该钢回火参数曲线，并在此基础上，建立了等效回方程，为该钢的热处理参数的选择提供必要的理论依据和试验依据．     

W_(18)Cr_4V钢真空油淬白亮层、熔化层形成原因的试验研究

W_(18)Cr_4V钢真空加热油淬后,表面出现白亮层和熔化层等异常现象。本文利用金相显微镜,显微硬度计、扫描电子显微镜和电子探针等手段对白亮层和熔化层进行了分析研究。试验表明,白亮层、熔化层均是真空油淬增碳的结果。本文对白亮层、溶化层形成原因进行了比较深入的分析探讨提出了产生白亮层必须同时具备的三个条件。     

最小二乘解存在的充分必要条件

本文提出了当观测值的权矩阵为正定或半正定的前提下，其最小二乘解存在的充分必要条件为并以间接平差为例验证了该结论的正确性。     

矩阵范数的界和方阵的ρ-条件数

本文给出了长方矩阵的p-范数及更广一类矩阵范数的上、下界又给出了方阵的p-条件数等于1的条件。(1≤p≤ ∞)。文[1]则是p=2的情况。前三节讨论p-条件数,第四节讨论长方矩阵范数的界。     

Study on the EM Scattering of Rivets on the Plate

The electromagnetic (EM) scattering by rivets on the conducting plate is studied for the first time by using electric field integral equation (EFIE) in conjunction with the moment method. The surfaces of the rivets and the plate are partitioned into triangular cells, the current distribution on the patches is represented by sub-domain type basis function, the EFIE is translated into matrix equation by the Galerkin method, then the current coefficient is obtained. The results show the properties of radar cross section (RCS) varying with the incident angle when there are rivets on the plate.     

纤维双相钢的组织形成及对性能的影响

研究了纤维双相15Mn2Nb钢组织的形成及对性能的影响.结果表明,纤维双相钢具有优异的强塑性匹配,是一种天然的复合材料.其纤维组织的获取主要取决于合金化和热处理工艺规程,而合金元素Nb阻碍铁素体再结晶是形成纤维组织的关键.     

回归系数的混合估计与最小二乘估计的一个新的相对效率

本文对具有附加信息的线性回归模型中的混合估计与最小二乘估计给出了一种新的相对效率,研究了新的相对效率与其它几种相对效率的关系,得出了新的相对效率的上、下界.     

广义风险过程中渐近方差的非参数估计

本文对广义风险过程中的渐近方差作了非参数估计,得出并证明了两个定理,为广义风险过程中破产概率的区间估计作了理论准备．     

Rebuilding of metal components with laser cladding forming

Laser cladding forming (LCF) is a novel powerful tool for the repairing of metal components. Rebuilding of V-grooves on medium carbon steel substrates has been carried out with laser cladding forming technique using stainless steel powder as the cladding material. Microstructure of the deposited layers has been characterized using optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive X-ray microanalysis (EDAX), electron probe microanalysis (EPMA) and X-ray diffraction (XRD). Mechanical properties of the rebuilt V-groove samples have been evaluated by tensile and impacting tests and microhardness measurement. Experimental results show that good fusion bonding between the rebuilt layers and the substrate has been formed, and the microstructure of the cladding layers is mainly composed of fine, dense and defect-free epitaxial columnar dendrites. Due to the effect of grain size refinement, the tensile strength, impacting toughness, elongation and microhardness of the rebuilt samples have been greatly enhanced compared to those of the substrate. Microhardness is also very uniform throughout the rebuilt regions. With the growth of the deposited layers, the microhardness increases gradually. The good ductility of the deposited regions is verified by the SEM fracture analysis.     

关于均值KIRCHHOFF板非线性边界镇定问题的几点注记

对于均值K IRCHHOFF板非线性边界镇定问题给出几点注记.首先应用G reen公式对具有非线性边界反馈控制的均值K IRCHHOFF板所决定的非线性系统的能量衰减速度进行了重新推导,从而修正了前人的结果.然后应用极大单调函数的定义和分部积分技巧,对均值K IRCHHOFF板非线性边界镇定问题所决定的非线性算子A的极大单调性给出了重新证明,进而更正了已有文献中相应证明的欠妥之处.