新型立体垂直塔板的开发现状

新型立体垂直筛板是近年来应用较为广泛的一种筛板,其主要特点是气液并流接触,传质在塔板空间内进行.本文对近年来开发的几种新型立体垂直筛板进行了详细的介绍,对其流体力学性能进行了比较,并对其发展前景进行了预测     

宽带膜厚实时监控过程中膜层折射率的确定方法

为了准确计算出镀膜过程中每层膜的折射率，介绍了实时监控过程中确定膜层折射率的2种方法：一种是由实测的透射比光谱直接反算出膜层的折射率；另一种是用最小二乘法的优化算法实时拟合折射率。试验结果表明：在线反算适合单点监控，所得折射率误差小于2%。然而在实际镀膜过程中,由于宽带内膜层参数误差较大,一般大于25%。为此，采用最小二乘法拟合，即在整个宽光谱范围内采集每个波长点的信息，所得结果误差很小，一般都在2％～5%之间,有时可达到10%,在很大程度上提高了实际镀膜时膜厚监控的精度。     

Acoustic reflection from a baffled elastic/piezoelectric plate

A finite difference/boundary integral procedure to determine the acoustic reflected pressure from a fluid-loaded bi-laminated plate is described. The bi-laminate is composed of a piezoelectric layer and an elastic layer in contact with the fluid, and is held by an acoustically hard baffle. In the numerical model, the fluid pressure at fluid/solid interface is replaced by a continuum of point sources weighted by the normal acceleration of the elastic plate, and the governing equation system is solved in the solid domain. With the normal acceleration found, the reflected pressure in the fluid is determined by an integral expression involving the Green's function. It is demonstrated that an appropriate applied voltage potential across the piezoelectric layer has the effect of cancelling either the reflected or scattered pressure of the plate at any chosen field points in the fluid. Project supported by the National Natural Science Foundation of China (No. 10172039).     

基于自适应预测滤波理论的模数转换器设计方法

基于自适应差分量化理论，提出了在不增加转换位数的情况下提高模数转换器(ADC)动态范围的一种设计方法。该方法通过量化输入与预测的差值来获得预测增益，从而扩大ADC的动态范围；通过差分量化值与预测值相加得到输出信号，并将该分别采用LMS和RLS算法进行处理．得到输入信号的预测值．计算机模拟结果证实，上述两种算法均能使模数转换器的动态范围提高约25dB．比较而言，RLS算法收敛速度更快，收敛性更好，但计算量较大．     

Analysis of a 2D “liquid”plasma lattice

Adustyplasmacanbedefinedasacomplicatedplasmacontainingsmallsolidmattercalleddustgrainsordustparticles,whichareusuallychargednegatively,duetoelectronshighermobilitythanion,bycollectingelectronsandionsfromthebackgroundplasma.Theuniverseisfilledwithdustyplasmassuchasplanetaryrings,comettails,andnebulae.Also,inindustrialplasmaprocessing,particulatessuspendedinplasmaarethemajorcontaminationinsemiconductormanufacture.Studiesondustyplasmahavebeenextendedtofar-flungtopicssuchaswaves,instabilities,stro…     

波片复合旋光器研究

利用矩阵光学方法，分析了波片复合旋光器的理论基础，给出了二元和三元复合波片旋光器的条件及其旋光角的大小的数学表达式，并根据此理论作了典型设计。结果表明，旋光角的大小与各波片的延迟量和它们的快轴同X轴的夹角有关。     

正交各向异性矩形板受迫振动的三维分析

从正交各向异性三维弹性动力学的控制方程出发，在求得四边简支矩形板自由振动频率和位移振型的基础上，构造了受迫振动的位移函数；利用自由振动位移振型的正交性，将控制方程的空间变量和时间变量分离，得到了广义质量、广义力和频率表示的关于时间的2阶常微分方程，从而得到了正交各向异性弹性矩形板在受迫振动下的位移场和应力场．给出了本文方法与薄板理论的算例．     

A note on the unsteady boundary layers over a flat plate

The unsteady boundary layer over a semi-infinite flat plate was investigated in this paper. The flow involves the unsteady flow over a flat plate with leading edge accretion or ablation. The momentum boundary layer was further analyzed and it was shown that the leading edge ablation had a similar effect to the wall mass injection or upstream wall movement making the fluid blown away from the wall. The thermal boundary layer of the same flow was also studied. Results show that the leading edge accretion or ablation can greatly change the fluid motion and the heat transfer characteristics.     

Numerical Prediction of the Strain State of Thermoset Matrix/Mineral Filler Composite Plates

The numerical prediction of the fields of inelastic strains (the linear invariant of the tensor of inelastic strains) in thermoset polyester/marble filler composite plates is discussed. A uniformly distributed load is applied to the plates, which lie on a steel base. The strain fields are predicted by means of the boundary element method by using creep test data for the composites and the polyester matrix itself. Identical creep tests were performed for two ages of the materials (1 month and 13 years), which allowed evaluating the aging effect. The study is carried out in two stages. At the first stage, the application of the generalized Maxwell-Gurevich equation to the thermoset matrix/mineral filler composite is demonstrated. The model parameters determined from the experimental creep data is used for the second stage, where the state of inelastic strains in the plates is predicted by applying the boundary element method. The influence of composite formulation (filler content) and physical aging of the polyester matrix on the state of inelastic strains in the plates is shown.__________Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 41, No. 2, pp. 145–156, March–April, 2005.     

BEPCⅡ LINAC束流光学匹配及轨道校正计算研究

 北京正负电子对撞机直线注入器(BEPCⅡ LINAC)的升级改进要求建立束流光学匹配计算和轨道校正系统，为此对束流光学匹配计算和轨道校正计算的方法进行了研究，并采用VC++语言编写了相应的程序，利用最小二乘法原理进行了束流光学匹配计算，模拟了束流轨道校正，取得了较为理想的结果。