离心力场下H2O和R12热驱动换热特性实验研究

本文实验研究了离心力场下细微封闭循环通道中,以H2O和氟利昂R12为热驱动介质的热驱动流动规律和换热特性,重点分析了热驱动换热效果随Ra数Ro数的变化规律以及冷却效果。实验结果表明:在热流密度和旋转速度相同的条件下,采用介质R12可以获得较高的平均换热系数,冷却效果也优于以H2O为介质的冷却效果。最后建立了两种介质条件下相应的准则关系式。     

压缩真空场与原子非线性作用过程中的纠缠与消纠缠

用Von Neumann熵研究了附加克尔介质的压缩真空场与二能级原子依赖强度耦合相互作用量子体系的量子纠缠特性.讨论了初始压缩真空场的压缩度以及克尔非线性作用的强度对该量子体系纠缠特性的影响.结果表明，克尔介质的非线性作用的强弱可以改变体系量子纠缠的周期性；在初始压缩度较大（r=5）时，克尔介质的非线性作用可导致原子与场持续地处于最大纠缠态，无消纠缠态或持续地处于消纠缠态. 关键词： 压缩真空态 克尔介质 依赖强度耦合J-C模型 Von Neumann熵 量子纠缠     

束变换环孔激光谐振腔的环束场传输差分计算

 通过使用新的坐标变量和光场的表达形式，推导了新坐标系下环束场传输的偏微分方程，给出了相应差分方程的截断误差和稳定性条件，使得环束场传输计算速度大幅提高；使用二阶精度的Crank-Nicolso差分方法对束变换环孔激光谐振腔的环束场传输进行了计算，并与W.D.Murphy和M.L.Bernabe所给M-B积分近似方法的计算结果进行了比较，证实了该方法无论计算速度和精度都优于M-B积分近似方法。     

应用离散偶应力单元分析弹性Cosserat介质

讨论了平面弹性偶应力问题的有限元方法,提出了离散偶应力单元的理论和构造方法,其特点是独立假设单元的位移和微观转角,偶应力理论中微观转角和宏观转角相等的假设在单元中以离散形式强加.该类单元列式简单,易于编程,且有满意的精度.并构造了一个三角形九自由度离散偶应力单元DCT9(discrete Coss-erat triangular).数值结果表明该单元能够较好地描述Cosserat介质的力学性质.     

钇覆盖Si@Al12团簇的贮氢性能

利用密度泛函理论系统地研究了Y_mSi@Al₁₂ (m=1—3)团簇及其贮氢性质. 结果表明, 在所研究的尺度范围内, 钇原子未在Si@Al₁₂团簇上团聚; 每个钇原子按18电子规则吸附氢分子, 其中Y₃Si@Al₁₂团簇可以吸附16个完整氢分子, 贮氢质量分数为5.0 %, 平均吸附能处于0.324—0.527 eV之间, 较为理想的吸附能说明在室温条件下吸氢和脱氢是可行的.     

Shrinking device realized by using layered structures of homogeneous isotropic materials

We propose the practical realization of a shrinking device by using layered structures of homogeneous isotropic materials.By mimicking the shrinking device with concentric alternating thin layers of isotropic dielectrics,the permittivity and the permeability in each isotropic layer can be properly determined from the effective medium theory in order to achieve the shrinking effect.The device realized by multilayer coating with dielectrics is validated by TE wave simulation,and good shrinking performance is demonstrated with only a few layers of homogeneous isotropic materials.     

Dislocations hétéro-interfaciales vis perçant une plaquette mince

A specimen observed in high-resolution transmission electron microscopy is electron transparent and its thickness is often less than about 10 nm. When it contains a linear defect like a screw dislocation, the obtained image can exhibit more or less important perturbations due to elastic relaxation nearby both free surfaces. Therefore, the theoretical interpretation of an image should include this relaxation in the calculation model. In the present work, it is evaluated for screw misfit dislocations piercing normally an elastically heterogeneous bicristalline plate (thickness 2h) from the following assumptions: there is no applied force on the thin plate and any surface stress related to a possible nanometric structure along the two free surfaces is neglected. The solution is found from an appropriate combination of known elastic fields in an infinite medium, which enables total stresses applying on two planes distant of 2h to be cancelled. This solution generalizes for the first time that of Eshelby and Stroh (1951), who consider an isolated screw dislocation normal to a homogeneous plate.     

Sigma Meson Production in Nuclear Reactions

The sigma meson production in p ＋ ^12C and p A- ^40Ca reactions at the incident energy Ep = 1.5 GeV is investigated within the Quantum Molecular Dynamics model. The simulation results indicate a distinctive A dependence of the sigma production, that is, the increase of A is followed by an increase of the production cross sections. We find that the σ meson production in proton-induced reactions is strongly medium-dependent, and the produced σ mesons decaying in a denser medium experience a stronger mass shift towards lower masses. This mass shift is an experimentally accessible observable in the final state pion pairs, which do not suffer from reabsorption by the surrounding nucleons. It is pointed out that the ratio of measured sigma cross sections as a function of the sigma invariant-mass from various reactions is a good probe to explore the existence of the σ meson in a dense nuclear environment.     

Numerical investigation of a fast-axial-flow CW CO2 laser

This paper presents the results of the calculation of the parameters of the active medium of a fast-axial-flow CO₂ laser using numerical methods in the framework of a one-dimensional approximation of the set of continuity equations, Bernoulli equation, equation of gas state, energy equation and multi-temperature rate equations with regard to diffusion for the gas flow in the cylindrical discharge tube. The spatial distribution of the small-signal gain and gas temperature along the gas flow direction have been calculated for a given set of initial conditions, namely, gas flow velocity, gas pressure and the tube diameter. In addition, the dependence of small-signal gain, the asymmetric stretch vibrational temperature of CO₂ (T₃) and the gas temperature on the discharge current were studied.     

胶体铁磁流体的光子特性研究

这篇综述回顾了我们今年来在铁磁流体方面的一些研究工作。铁磁流体是一种纳米磁颗粒或亚铁磁颗粒悬浮在基液（如：水或煤油）中形成的悬浮液。铁磁流体之所以受到广泛关注,是因为它们在许多方面都有着潜在应用,例如在机械工程和生物医学等领域。再次综述中,我们首先介绍了铁磁流体的场感应各向异性结构,然后,介绍了几种铁磁流体基软物质材料的光学性质,即：光学负折射、磁控光子待隙和非线性光学响应。我们采用的研究方法主要是分子动力学模拟,有效煤质近似和有限元模拟.