中能质子注量率测量

质子是太空辐射环境中的主要粒子成分,随着半导体工艺向着小尺寸高集成度方向不断发展,质子单粒子效应不容忽视.通过加速器模拟空间辐射进行地面实验是评价质子单粒子效应最重要的手段,质子注量率的准确测量是器件考核评估过程中最关键的环节.本文基于原子能院100MeV质子单粒子效应辐照装置,突破了宽量程中能质子注量率测量技术,开发了法拉第筒、塑料闪烁体探测器和二次电子发射监督器等探测工具,可以对束流进行宽量程范围准确测量,解决了质子注量率在10~6—10~7 p·cm^-2·s^-1范围内难以测量的关键难题,并进行了注量率不确定度的分析研究,同一注量率下法拉第筒和塑料闪烁体探测器的实验测量误差与理论分析误差相符.对中能质子注量率测量达到了国际同类装置水平.该研究建立的中能质子注量率测量系统和不确定度分析方法,为准确评估元器件辐射效应奠定了基础.     

Chemical bonding in representative astrophysically relevant neutral,cation, and anion HCnH chains

Most existing studies assign a polyynic and cumulenic character of chemical bonding in carbon-based chains relying on values of the bond lengths. Building on our recent work, in this paper we add further evidence on the limitations of such an analysis and demonstrate the significant insight gained via natural bond analysis. Presently reported results include atomic charges, natural bond order and valence indices obtained from ab initio computations for representative members of the astrophysically relevant neutral and charged HC_2k/2k+1H chain family. They unravel a series of counter-intuitive aspects and/or help naive intuition in properly understanding microscopic processes, e.g., electron removal from or electron attachment to a neutral chain. Demonstrating that the Wiberg indices adequately quantify the chemical bonding structure of the HC_2k/2k+1H chains—while the often heavily advertised Mayer indices do not—represents an important message conveyed by the present study.     

格子Boltzmann模型平衡分布边界条件和多棱柱排列渗流流场的数值模拟

介绍了适用于多种流场数值模拟的无滑动格子Boltzmann平衡分布边界条件，这一边界条件是以Bounce-Back方法为基础并满足质量、动量守恒的准则.数值计算结果表明平衡分布边界条件克服了Bounce-Back方法在边界上所产生的滑动速度误差效应.利用平衡分布边界条件数值模拟了由棱柱形充填粒子构成的微尺度渗流流场中的Darcy-Forchheimer方程，通过与Lee 和Yang的数值结果比较，该预测结果是足够可靠的. 关键词： 平衡分布边界条件 渗流介质 Darcy-Forchheimer阻力     

A high‐accuracy complex‐phase method of simulating X‐ray propagation through a multi‐lens system

The propagation of X‐ray waves through an optical system consisting of many X‐ray refractive lenses is considered. For solving the problem for an electromagnetic wave, a finite‐difference method is applied. The error of simulation is analytically estimated and investigated. It was found that a very detailed difference grid is required for reliable and accurate calculations of the propagation of X‐ray waves through a multi‐lens system. The reasons for using a very detailed difference grid are investigated. It was shown that the wave phase becomes a function, very quickly increasing with increasing distance from the optical axis, after the wave has passed through the multi‐lens system. If the phase is a quickly increasing function of the coordinates perpendicular to the optical axis, then the electric field of the wave is a quickly oscillating function of these coordinates, and thus a very detailed difference grid becomes necessary to describe such a wavefield. To avoid this difficulty, an equation for the phase function is proposed as an alternative to the equation of the electric field. This allows reliable and accurate simulations to be carried out when using the multi‐lens system. An equation for the phase function is derived and used for accurate simulations. The numerical error of the suggested method is estimated. It is shown that the equation for the phase function allows efficient simulations to be fulfilled for the multi‐lens system.     

A high-order numerical method for the nonlinear Helmholtz equation in multidimensional layered media

We present a novel computational methodology for solving the scalar nonlinear Helmholtz equation (NLH) that governs the propagation of laser light in Kerr dielectrics.     

金属和Kerr非线性介质界面上表面等离子体激元的色散关系

从麦克斯韦方程组出发,结合边界条件,分别得到TM波和TE波在金属和Kerr非线性介质界面上表面等离子体激元的色散关系.由于非线性的存在,TM波的色散关系变得复杂,与光强、非线性系数有关.和线性情况一样,此界面不存在TE波.     

����DSP�������޻���������Ƶ����ϵͳ����

介绍了三相无环流交交变频控制系统设计的控制原理及其DSP控制系统硬件和软件的具体设计,并给出了在搭建的主回路平台上进行整体调试的结果。在其DSP控制系统的驱动控制下,三相交交变频器能输出频率为0~15Hz电流和电压波形,电流无环流死区时间为1.2ms,调试结果显示所研制的DSP三相交交变频数字控制系统具有较高的控制精度和实时性。     

斜入射分层线性各向异性等离子体电磁散射时域有限差分方法分析

提出了斜入射分层线性各向异性等离子体电磁散射的时域有限差分(FDTD)方法,通过将二维麦克斯韦方程等价地转换为一维麦克斯韦方程,避免了用二维时域有限差分方法分析该散射问题,极大地提高了计算效率.分析推导了TEz和TMz波斜入射线性分层各向异性等离子体电磁散射的FDTD方法,然后通过该方法计算不同入射角的各向异性等离子板的电磁波反射系数,并与其解析解进行比较,结果表明该方法的准确性和有效性.最后,将该算法应用于计算涂覆分层各向异性等离子体金属板在不同入射角下的反射系数,分析了不同入射角对反射系数的影响.     

非胶结含水合物沉积物修正等效介质速度模型及其地震波场特征研究

通过数值分析,发现对应于悬浮模式、颗粒接触模式的等效介质模型A,B预测的含水合物沉积物纵波速度、横波速度及泊松比存在物理认识上的缺陷,单独考虑水合物微观模式为悬浮模式或颗粒接触模式并不合理.认为非胶结水合物的微观模式与其饱和度存在关联,并运用拉格朗日插值方法建立了新的非胶结含水合物沉积物修正等效介质速度模型.该模型体现了水合物饱和度对于水合物微观模式的影响,数值分析结果表明新模型预测结果更合理.基于新模型对非胶结含水合物沉积物的地震波场进行了数值模拟,探讨了似海底反射及空白带的形成机理,对实际水合物地震勘 关键词： 水合物 等效介质模型 似海底反射 空白带     

短脉冲激光与介质相互作用的扩散模型

推导了扩散近似方程,通过半无限大均匀介质计算,用扩散理论分析解验证了数值方法的有效性.模拟了光在非均匀介质内的传输过程,给出了介质内光通量随时间变化的空间分布.结果表明,该基于扩散模型的数值方法能够模拟短脉冲光在强散射介质中的传播过程以及漫散射光的时间变化特性,并且借助于光通量空间分布能够准确模拟非均匀介质内内含物的位置.