Independence of the brittle–ductile transition from the rubber particle size for impact‐modified poly(vinyl chloride)

A series of acrylic impact modifiers (AIMs) with different particle sizes ranging from 55.2 to 927.0 nm were synthesized by seeded emulsion polymerization, and the effect of the particle size on the brittle–ductile transition of impact‐modified poly(vinyl chloride) (PVC) was investigated. For each AIM, a series of PVC/AIM blends with compositions of 6, 8, 10, 12, and 15 phr AIM in 100 phr PVC were prepared, and the Izod impact strengths of these blends were tested at 23 °C. For AIMs with particle sizes of 55.2, 59.8, 125.2, 243.2, and 341.1 nm, the blends fractured in the brittle mode when the concentration of AIM was lower than 10 phr, whereas the blends showed ductile fracture when the AIM concentration reached 10 phr. It was concluded that the brittle–ductile transition of the PVC/AIM blends was independent of the particle size in the range of 55.2–341.1 nm. When the particle size was greater than 341.1 nm, however, the brittle–ductile transition shifted to a higher AIM concentration with an increase in the particle size. Furthermore, the critical interparticle distance was found not to be the criterion of the brittle–ductile transition for the PVC/AIM blends. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 696–702, 2006     

Simulation of the diffusion process in composite porous media by random walks

A new random-walk interpolation scheme was developed to simulate solute transport through composite porous media with different porosities as well as different diffusivities. The significant influences of the abrupt variations of porosity and diffusivity on solute transport were simulated by tracking random walkers through a linear interpolation domain across the heterogeneity interface. The displacements of the random walkers within the interpolation region were obtained explicitly by establishing the equivalence between the Fokker-Planck equation and the advection-dispersion equation. Applications indicate that the random-walk interpolation method can simulate one- and two-dimensional, 2nd-order diffusion processes in composite media without local mass conservation errors. In addition, both the theoretical derivations and the numerical simulations show that the drift and dispersion of particles depend on the type of Markov process selected to reflect the dynamics of random walkers. If the nonlinear Langevin equation is used, the gradient of porosity and the gradient of diffusivity strongly affect the drift displacement of particles. Therefore, random-walking particles driven by the gradient of porosity, the gradient of diffusivity, and the random diffusion, can imitate the transport of solute under only pure diffusion in composite porous media containing abrupt variations of porosity and diffusivity.     

模糊神经网络在复合地基沉降量预测中的应用

复合地基后期沉降变形对于建筑物设计及安全具有重要意义,针对通过长期沉降观测以得到复合地基的最终沉降需要耗费较多资源的问题,提出了一种基于模糊神经网络的预测方法.该方法考虑沉降变化过程有较大的随机性和模糊性,直接将样本数据进行模糊化,所得的模糊数代表了样本点集与控制点集中各分量之间的相关度,并依此建立模糊BP神经网络进行学习和估算.实验结果表明了该方法对沉降进行预测是可行与有效的,且在相对误差的有效控制方面优于BP网络方法与灰色方法.     

高分子阳离子絮凝剂用于炼油废水处理研究

用聚二甲基二烯丙基氯化铵型高分子阳离子絮凝剂处理炼油废水考察了险油和化学耗氧量的动态变化规律。对产生的浮渣性质及滤饼的成份进行了研究。并且与聚合铝的处理效果进行对照。研究结果表明，ＨＣＡ除油和化学耗管氧量的性能优于ＰＡＣ，ＨＣＡ产生的浮渣是ＰＡＣ的三分之一，而浮渣中的含油量则是ＰＡＣ的三倍。     

Pressure and temperature effects on the excess deuteron and proton conductance

The limiting molar conductances ° of deuterium chloride DCl in D₂O were determined as a function of pressure and temperature in order to examine the proton-jump mechanism in detail. The excess deuteron conductances °_E(D ⁺), as estimated by the equation [°_E(D ⁺) = °(DCl/D ₂ O) – °(KCl/D ₂ O)], increases with an increase in the pressure and temperature as well as the excess proton conductance [°_E(H ⁺) = °(HCl/H ₂ O) – °(KCl/H ₂ O)]. The isotope effect on the excess conductances, however, depends on the pressure and temperature contrary to the model proposed by Conway et al.: °_E(H ⁺)/°_E(D ⁺) decreases with increasing pressure and temperature. The magnitude of the decrease with pressure becomes more prominent at lower temperature. These results are discussed in terms of the pre-rotation of adjacent water molecules, the bending of hydrogen bonds with pressure, and the difference in strength of hydrogen bonds between D₂O and H₂O.     

二氯甲烷在担载型三氧化铬催化剂上的催化降解

本文研究了二氯甲烷在不同的担载型ＣｒＯ_３催化剂上的催化降解．实验揭示：碳纤维的单丝直径粗细，吸附能力，ＺＳＭ－５沸石中晶格外铝的含量以及Ａｌ_２Ｏ_３的形貌与物相等均明显影响催化剂的催化活性与选择性．文中对不同的载体作了比较，还对活性组分ＣｒＯ_３的铬的价态，用氢气还原与空气灼烧两种预处理对催化行为的影响进行了讨论．     

多钼酸盐–柠檬酸复合膜的多色光致变色

制备了多钼酸盐–柠檬酸光致变色复合膜，紫外光照后发现不同摩尔比的复合膜呈现不同的颜色。当摩尔比为1.0，0.3和0.2时，变色后的薄膜分别显深蓝色，深黄褐色和淡海绿色。通过对薄膜的拉曼光谱分析证实呈现不同的颜色是由于在变色后的膜中生成了不同的物种。柠檬酸在光致变色过程中起着重要的作用, 在紫外光的照射下它作为空穴的捕获剂, 抑制了光生电子和空穴的复合, 使多钼酸盐呈现紫外光致变色现象。     

Iodine catalyzed efficient synthesis of symmetrical diaryl sulfoxides from arenes and thionyl chloride under solvent-free conditions

Synthesis of symmetrical diaryl sulfoxides from arenes and thionyl chloride in the presence of a catalytic amount of iodine at room temperature under solvent-free conditions is described.Mild reaction conditions,easy workup,high yield,and easily available catalyst are important features of this method.     

氯化镍催化的醚的酰化开裂反应

在某些金属盐存在下,醚可与酰氯反应生成酯,早期文献中对于此类反应曾有过报道,其中所用的金属盐有三氯化铁或氯化锌,其相对用量较大,酯的得率较差。其后,Alper等提出用第五族金属羰基化合物和酰氯,如Mo(CO)_4-RCOCl为试剂,进行醚的开裂;近期则有Pri-Bar等用Pd(Ⅱ)-R_3SnX-