Research on reconfigurable collaborative remote diagnosis system

The function-layer model and working model of collaborative remote fault diagnosis system （FDS）, which includes three layers： task layer, collaboration layer and diagnosing layer, are proposed. The running mechanism of the system is discussed. A collaborative FDS may consist of several subsystems running at different places and the subsystem consists of several fimction modules. A structure centered on data-bus is adopted in subsystem. All the function modules in subsystem are encapsulated into software intelligent chips （SICs） and SIC can but connect with data-bus. So, it is feasible to reuse these diagnosis fimction modules and the structure of subsystem in different diagnosis applications. With the reconfigurable SICs, several different function modules can reconstruct quickly some different diagnosis subsystems in different combinations, and some subsystems can also reconfigure a specified collaborative FDS.     

石英芯片电泳分离检测尿中蛋白的研究

通过对缓冲体系、缓冲液浓度、酸度、乳酸钙浓度、乙胺浓度、电泳电压和进样时间的优化选择，用石英芯片电泳一紫外检测法分离了纯人白蛋白和人运铁蛋白；在75mmol／L硼酸盐（pH10．55）（含0．8mmol／L乳酸钙、1％（φ）乙胺）运行缓冲液中，上述两组分在3min内完全分离；纯人白蛋白和人运铁蛋白的线性范围分别为1．0～15．0g/L和1．0～10．0g／L；检出限（S／N=3）均为0．5g／L，应用于临床尿蛋白分离测定，并与Helena琼脂糖凝胶电泳仪电泳结果进行比较，获得一致结果。     

Sample Injection for Capillary Electrophoresis on a Micro Fabricated Device/On Chip CE Injection

Abstract

Reproducible injection for capillary electrophoresis on a micro device/Lab on chip is not an easy task. Different injection designs (e.g., T‐type, double T‐type, cross) and different injection modes have been applied (pinched injection, gated injection, optically gated injection, pressure/pneumatic injection, double L injection) with various analytes. Problems and properties of the different modes are described.     

通用型激光诱导荧光微流控芯片分析仪的研制与性能考察

设计和研制了一种通用型激光诱导荧光微流控芯片分析仪.检测部分按共聚焦检测原理设计,采用CCD(电荷耦合器件)监测通道,三维自动调节聚焦,发射波长滤光片可方便地更换以适应多种染料选择,能分别显示进样和分离通道2条电流-时间曲线.考察了该分析仪的检测灵敏度、检测极限和线性范围,显示了分析灵敏度高,检测限低和线性范围宽等特点,在自制注塑型PMMA塑料芯片上实现了φX174Haedi-gesT_dNA片段的分离测定和烟叶act基因PCR产物的分析     

小分子阿特拉津和罂粟碱检测的免疫芯片技术研究

采用蛋白芯片竞争法对小分子半抗原的污染物进行检测。在获得特异性抗体的前提下,首先将阿特拉津半抗原进行了衍生化,然后将该衍生物和氨基罂粟碱分别与载体蛋白质卵清蛋白(OVA)进行偶联。实验证明新合成的完全抗原能够与其相应抗体发生特异性的结合。实验还对蛋白芯片检测阿特拉津进行了条件优化,其抗体固定化时间为2h,用卵清蛋白为封闭液的封闭时间为1h,样品稀释液pH值为8．0。并对阿特拉津及罂粟碱进行了定性、定量实验,结果表明：荧光信号强度随待测物浓度的降低而增强,有一定的线性趋势,阿特拉津检出限为0．001mg/L,罂粟碱检出限为0．01mg/L。     

注塑型聚甲基丙烯酸甲酯多通道微流控芯片的研制及其性能考察

微流控芯片技术因具有微量、快速、高效和高通量等特点,已成为分析化学领域中的研究热点之一．在微流控芯片中,最常见的可用作芯片的材料为玻璃、石英和各种塑料．玻璃和石英有很好的电渗性和光学性质,可采用标准的刻蚀工艺加工和用化学方法进行表面改性,但加工成本较高,封接难度较大．     

Evaluation of photodynamic therapy (PDT) procedures using microfluidic system

A hybrid PDMS/glass microfluidic system for evaluation of the efficiency of photodynamic therapy is presented. 5-aminolevulinic acid (ALA) was used as a precursor of photosensitizer. The geometry of the microdevice presented in this paper enables to test different concentrations of the photosensitizer in a single assay. The viability of the A549 cells was determined 24 h after PDT procedure (irradiation with light which induced a photosensitizer accumulated in carcinoma cells, λ = 625 nm). The presented results confirmed the possibility to perform the photodynamic therapy process in vitro in microscale and the possibility to assess its effectiveness. Moreover, because two identical microstructures on a single chip were performed, the microchip can be used for examination simultaneously various cell lines (carcinoma and normal) or various photosensitizers.     

微流控芯片测定盐酸金刚烷胺片中的盐酸金刚烷胺

建立了微流控芯片非接触电导检测片剂中盐酸金刚烷胺的分析方法.对缓冲液和添加剂的种类及浓度、分离电压、进样时间等进行了优化.实验采用1 mmol/L HAc+2 mmol/L NaAc(pH 4.5)+0.1 mmol/LSDS的缓冲体系,于2.00kV的分离电压下进样10 s,在1 min内实现了盐酸金刚烷胺的快速检测...     

基于纳米金探针和基因芯片的DNA检测新方法

运用荧光纳米金探针和基因芯片杂交建立一种新的DNA检测方法. 荧光纳米金探针表面标记有两种DNA探针: 一种为带有Cy5荧光分子的信号探针BP1, 起信号放大作用; 另一种为与靶DNA一部分互补的检测探针P532, 两种探针比例为5∶1. 当靶DNA存在时, 芯片上捕捉探针(与靶DNA的另一部分互补)通过碱基互补配对结合靶DNA, 将靶DNA固定于芯片上; 荧光纳米金探针通过检测探针与靶DNA及芯片结合, 在芯片上形成“三明治”复合结构, 最后通过检测信号探针上荧光分子的信号强度来确定靶DNA的量. 新方法检测灵敏度高, 可以检测浓度为1 pmol/L的靶DNA, 操作简单, 检测时间短. 通过改进纳米金探针的标记和优化杂交条件, 可进一步提高核酸检测的灵敏度, 这将在核酸检测方面具有重要的应用价值.     

基于聚酰亚胺基底的细胞电融合芯片的研制

基于柔性印刷电路板(flexible printed circuits board, FPCB)技术,通过在聚酰亚胺基底薄膜表面层压的铜箔上刻蚀微电极阵列结构制备了一种细胞电融合芯片.在低电压(≤40 V)条件下实现了细胞电融合,融合效率达37%,远高于聚乙二醇(polyethylene glycol, PEG)法及传统细胞电融合方法.与传统细胞电融合系统相比,此芯片可在低电压条件下工作,具有结构简单、成本低廉、实验过程可观察、融合通量高等优点.另外,聚酰亚胺薄膜基底良好的柔软度可保证此芯片与其它分析模块(如细胞筛选分离模块)的有效集成,具备构造微全分析系统(micro total analytical system, μ-TAS)的巨大潜力.