论化学武器的危害及其防护

化学武器虽然早已被国际公约禁止,但有些国家并没有放弃研制和生产,国际恐怖组织也在利用化学武器制造恐怖袭击或进行恐怖威胁。因此,充分认识化学武器对人类的危害,做好防护和防范工作具有重要的现实意义。     

Geometry and electronic structure of a heterometallic cluster Mo<Subscript>2</Subscript>Mg<Subscript>2</Subscript> in different oxidation states of Mo: a DFT study

Reduction of tetranuclear heterometallic complex Mo₂Mg₂ was simulated using the B3LYP and PBE density functional methods. The results of geometry calculations of the initial complex [Mo^VIO₂Mg(MeOH)₂(OMe)₄]₂ and a partially reduced Mo^V complex are in good agreement with experimental data. The reduced Mo^III complex is characterized by a decrease in the binding energy of aqua ligands. Structural rearrangement of the complex with release of a coordination position at the Mo atoms requires small energy expenditure. One can assume that the reduction of the polynuclear complex causes overcrowding of its coordination sphere, which favors formation of dinitrogen complexes. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 441–457, March, 2008.     

On the Donor Ability of the Phosphaneiminato Substituent and Cube Formation with Transition Metal Fragments

The particular role of the phosphaneiminato ligand as a donor is investigated for a) nitrenes (phosphinidenes) and carbenes and b) cubane formation with transition metals. Accordingly, and as shown for the case a) the ligand is a stronger π‐donor than an amino group and can be considered as a special case of imine‐type substituents. The latter are very effective in π‐donation. In the case b), i.e. the cubane formation with transition metals, one has to consider transition metals with a partially or completely filled d‐shell (with electrons). Hence depending on the transition metal, cubanes are build with weak ferromagnetic coupled or closed shell systems. For the cubanes with closed shell character the matter of insertion of halide anions is discussed. In the last chapter of the review the bond stretching in the dithionitrosyl complexes with rhenium is characterized.     

针剂头孢曲松钠对B-Z化学振荡反应的影响及其分析检测

研究了针剂头孢曲松钠对经典的B-Z化学振荡体系的扰动,结果表明头孢曲松钠的浓度与扰动后振荡周期的改变量存在一定的线性关系,其线性范围为6.15×10-7~5×10-3mol/L,最低检测限为6.25×10-8mol/L.探讨了针剂头孢曲松钠对化学振荡反应扰动的可能机理.     

卤代对苝醌类光敏剂光敏活性影响的量子化学研究

以一种新型的醌类光敏剂—菌生素 (HMB)为模型化合物 ,利用量子化学从头算HF/ 6 31G和含时密度泛函TD B3LYP/ 6 31G方法计算研究了卤代作用对醌类光敏剂分子性质和光敏活性的影响 .结果发现 ,卤代作用降低了HMB母体的HOMO和LUMO能级 (EHOMO和ELUMO)及其差值△E ,随卤族元素从上到下 ,EHOMO和ELUMO呈增大趋势 ,而△E呈减小趋势 ,使得分子激发光谱有不同程度的红移 ,在增加PQP三重态量子产率的同时降低了分子最低三重激发态的能量 ,两种作用相互抵消 ,使得卤代物的 1O2 量子产率与母体相似 ;增加了分子的绝热电子亲合势 ,使分子产生O2 -的能力下降 ;卤原子的引入 ,降低了HMB母体分子内氢键的强度 ,同时使顺式构型的分子内质子传递势垒增大 ,而使反式构型势垒减小 .     

医疗和危险废物高温洁净热处理及环境力学

结合2003年中国的突发危害公众健康的事件，分析了医疗、化学战剂及危险废物的分类、特性，比较了各种高温热处理技术的基本要求，方法分类和设备特点，包括：各类焚烧炉、热解炉和等离子体裂解装置．还对前处理工艺要求，尾气处理工艺等进行了分析讨论，讨论了防止二次污染的技术手段，特别介绍了二噁英等高危险性产物的特性．还介绍了发达国家的医疗废物和危险废物的管理、处置和二次污染防治等情况．     

燃煤过程痕量元素动力学机理的研究进展

由于痕量元素在煤中的含量低微、检测困难,加之其原子量一般较大,可能的反应途径多,使得相关的反应机理研究难度极大。本文结合作者的研究成果,介绍了煤燃烧过程中痕量元素化学反应动力学的国内外研究进展,包括痕量元素化学动力学机理的建立;相关的典型实验、计算模拟及其实验验证、动力学机理模型的简化;痕量元素反应动力学机理的完善和发展,包括采用简单碰撞理论、活化络合物理论(亦称过渡态理论,或绝对反应速率理论)对痕量元素化学反应动力学机理的修正;最后指出煤燃烧过程中痕量元素动力学研究的若干方向是: (1)痕量元素反应动力学模型数据库的建立;(2)煤燃烧过程中,主量元素和次量元素的动力学机理的完善; (3)各痕量元素之间动力学研究的开展; (4)实际燃烧过程中痕量元素动力学行为的研究。     

Assignment of chemical shifts in benzohydroxamic acid and structure of its silylated derivatives by 15N enrichment

¹⁵N isotopic enrichment was necessary for the unequivocal assignment of the ¹H NMR lines to the protons in the NH–OH fragment of benzohydroxamic acid, BHXA, C₆H₅CONHOH, in dry dimethyl sulfoxide solutions. The assignment [δ(NH) = 11.21, δ(OH) = 9.01, ¹J(¹⁵N,¹H) = 102.2 Hz, ²J(¹⁵N,¹H) <1.5 Hz], which is opposite to that used by other authors, confirms the assignment extended to BHXA by Brown and co‐workers from the spectra of acetohydroxamic acid. The enrichment allowed also assignment of the ²⁹Si lines in the spectra of disilylated benzohydroxamic acid, (Z)‐tert‐butyldimethylsilyl N‐tert‐butyldimethylsilyloxybenzoimidate (2) and (Z)‐tert‐butyldiphenylsilyl N‐tert‐butyldiphenylsilyloxybenzoimidate (3), and confirmed structure of the monosilylated products, N‐tert‐butyldiphenylsilyloxybenzamide (4) and N‐tert‐butyldiphenylsilyloxy benzoimidic acid (5). Copyright © 2003 John Wiley & Sons, Ltd.     

对承压设备安全阀使用中几个问题的探讨

对承压设备安全阀使用中存在的几个问题进行了探讨,并提出相应的解决措施。     

Studies on the blends of cardanol-based epoxidized novolac resin and CTPB

Cardanol-based novolac-type phenolic resins were synthesized with different mole ratios of cardanol-to-formaldehyde, viz., 1:0.6, 1:0.7, and 1:0.8. These novolac resins were epoxidized with molar excess of epichlorohydrin at 120 °C in basic medium. The epoxidized novolac resins were, separately, blended with different weight ratios of carboxyl-terminated polybutadiene liquid rubber ranging between 0-25 wt% with an interval of 5 wt%. All the blends were cured at 150 °C with 40 wt% polyamide. The formation of various products during the curing of blend samples has been studied by Fourier-transform infra-red spectroscopic analysis. The tensile strength and elongation-at-break of the cured samples increased up to 15 wt% in the blend and decreased thereafter. This blend sample was also found to be most thermally stable system. The blend morphology, studied by scanning electron microscopy analysis, was finally correlated with the structural and property changes in the blends.