ECR-SFC轴向注入系统聚束器效率的研究

为了减少目前SFC轴向注入系统中聚束器杂散电场对束流轴向注入效率的影响, 提高新系统中SFC的束流俘获效率, 参考原始设计, 对目前聚束器的电极结构进行了设计改进. 两种情况下的聚束器杂散场对注入效率影响的计算表明, 改进后0B02的聚束效率较目前有较大提高. 同时计算了束流空间电荷效应对聚束效率的影响, 据此对新SFC轴向注入系统中聚束器的位置进行了重新调整.     

Postmodification of poly(9‐alkyl‐9H‐carbazole‐2,7‐diyl)s as a route to new main‐chain‐functionalized carbazole polymers

The postmodification of poly[9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P1 ) upon its reaction with N‐bromosuccinimide affords exclusive and full bromination of the 3,6‐positions of the carbazole repeat units to yield poly[3,6‐dibromo‐9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P2 ). Brominated polymer P2 can be used as a precursor for further functionalization at the 3,6‐positions with the desired functional group to afford other useful polymers. Polymer P2 has hence been reacted with copper(I) cyanide to afford poly[3,6‐dicyano‐9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P3 ). Full substitution of the bromide groups with nitrile‐functional groups has been achieved. The preparation and structural characterization of polymers P2 and P3 are presented together with studies on their electronic conjugation and photoluminescence properties. Cyclic voltammetry studies on polymer P3 indicate that the new polymer is easier to reduce (n‐dope) but more difficult to oxidize than its unsubstituted counterpart ( P1 ) as a result of the introduction of the electron‐withdrawing nitrile‐functional groups at the 3,6‐positions on the carbazole repeat units on the polymer chains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3336–3342, 2006     

对完善我国工伤保险制度的思考

完善我国工伤保险制度的根本措施就是扩大工伤保险的范围、拓宽工伤保险基金的来源渠道，把工伤补偿与工伤预防、医疗康复、职业康复紧密地结合起来，不断提高工伤保险的管理水平。     

环形线电荷的电场分布

给出了圆环形线电荷电场分布的理论公式，并利用计算机计算出其具体分布规律。     

Picosecond dynamics of intramolecular charge transfer in benzophenone amino derivatives

Institute of Molecular and Atomic Physics, Academy of Sciences of Belarus, 70 F. Skaryna Ave, Minsk 220072, Belarus. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 62, No. 3, pp. 49–55, May–June, 1995.     

受激布里渊散射相位共轭现象的二维数值模拟

 使用P.H.Hu等人[3，4]提出的计算途径，数值解了A.Flusberg等人[2]提出的零级方程。计算了布里渊池内随位置而变化的斯托克斯光强度、泵浦光强度和保真度，得到了布里渊池内几个位置上的斯托克斯光相位和强度的横向分布，并计算了泵浦光入口处的反射率和保真度。     

钢丝绳断丝定量检测中径向随机晃动误差的补尝

本文论述了钢丝绳断丝定量检测中径向随机晃动误差存在的必然性及该误差对定量检测的影响,基于模拟实验结果,给出了适用于多种类型钢丝绳的V_H-S数学关系式;提出了波形因素的概念与形式,并用软件实现了钢丝绳断丝定量检测中径向随机晃动误差的补偿。     

Stochastic flows on a countable set: Convergence in distribution

Consider a sequenceF ₁,F ₂,... of i.i.d. random transformations from a countable setV toV. Such a sequence describes a discrete-time stochastic flow onV, in which the position at timen of a particle that started at sitex isM _n(x), whereM _n =F _n F _n–1 F ₁. We give conditions on the law ofF ₁ for the sequence (M _n) to be tight, and describe the possible limiting law. an example called the block charge model is introduced. The results can be formulated as a statement about the convergence in distribution of products of infinite-dimensional random stochastic matrices. In practical terms, they describe the possible equilibria for random motions of systems of particles on a countable set, without births or deaths, where each site may be occupied by any number of particles, and all particles at a particular site move together.     

SPS法研究ZnTPP对TiO_2的光谱敏化

本文利用表面光电压谱(Surface Photovohage spectroscopy,简称SPS)研究了ZnTPP对TiO_2粉末的光谱敏化,发现用ZnTPP修饰后的TiO_2(金红石和锐钛矿)粉末在可见区420、550和590nm附近有三个光伏响应带,它们分别对应于ZnTPP的Soret、Q(1,0)和Q(0,0)带。经过严格的实验和分析,证明这三个带是由ZnTPP对TiO_2的敏化光电压引起的,而不是ZnTPP自身的光伏响应。在敏化效果上,亚稳的锐钛矿优于金红石。同时,我们对这种光敏表面的光诱导电荷转移机制和SPS作为一种研究光谱敏化方法的可行性进行了讨论。     

室温下非极性溶剂中氧鎓盐的定域激发

氧鎓盐类化合物因具有较强的亲电性，在有机合成[1]及电照相体系[2]中存在着广泛的应用前景．由于它们还表现出较强的荧光发射能力［3］，因而在作为激光工作材料［4，5］方面也受到重视．正因如此，这类化合物的光物理和光谱特性引起了许多化学家的兴趣．氧钠盐化合物溶液的荧