Transient heat transfer in a spherical protective material, submitted to flux and mixed boundary conditions: an investigation on zirconia

An analytic solution is presented for describing combined radiation and conduction heat transfer in a spherical fiber thermal protection exposed to combined radiative and convective heating. The solution includes the equation of radiative transfer within the material, coupled to a transient energy equation that contains both radiative and convective terms. At elevated temperatures radiative transfer becomes important, and if several hot surfaces view each other, the radiation exchange process must be considered carefully. Some thermal protections are partially transparent to thermal radiation. Hence, an exchange process is complicated by radiation penetrating into and coming out of material. The radiation leaving an area depends on the temperature distribution inside that area and that is unknown and is affected by the exchange process to other areas. The analysis has allowed for unlimited spectral detail but assumes that the various material properties do not vary significantly with temperature. Transient temperature distributions are obtained for the boundary conditions of external radiation and convection. The present analysis includes the influence of reflectivity, surface radiative properties and spectral properties on the temperature distributions.     

FDTD study of subwavelength imaging by a photonic crystal slab

The problem of subwavelength imaging via a photonic crystal slab lens made of two-dimensional (2D) square arrays of parallel dielectric cylinders in air is studied and discussed theoretically. The finite-difference time-domain method is employed to investigate the unique features of imaging by such lens. We confirm earlier findings that a photonic crystal slab lens can provide the imaging of a point source. By analysing the transmission properties of the proposed structure, we demonstrate that inside the all-angle negative refraction, there are some favourable directions for waves to travel. We show that the surface termination of the photonic crystal is a key parameter to obtain a good quality image. The super-resolution of two sources separated by a distance less than the wavelength is also considered. It is shown that the achievable resolution is limited by the slab length.     

Constitutive equations for no-tension materials

Summary For a material which is incapable of sustaining tensile stresses (no-tension material, NTM), the local stability postulate is utilized in order to derive the appropriate equations which relate, within general 3D situations, cracking strain states and stress states to each other. Several alternative forms of these equations are discussed, either in terms of stress and strain components, or in terms of stress and strain invariants. The results obtained improve known results regarding the NTM's.

---

Sommario Per un materiale non resistente a trazione in stati di tensione e deformazione triassiali viene utilizzato il postulate di stabilità locale per ottenere appropriate equazioni che mettono in relazione gli stati di deformazione fragile (o fessurativa) con gli stati di tensione. Sono discusse alcune forme alternative di queste equazioni espresse in termini di componenti di tensione e di deformazione, oppure in termini di invarianti delle tensioni e delle deformazioni. I risultati ottenuti comprovano e arricchiscono noti risultati riguardanti i materiali che non resistono a trazione.

     

Parameter identification for viscoelastic materials

Starting from the general stress-strain relation for a linear Boltzmann-Volterra material, which is in agreement with the principle of inertia, a new identification procedure is proposed. Instead of running one long-range relaxation experiment, following asingle suitably specified deformation history, material characterization is done using the data ofn short relaxation experiments followingn different deformation histories. To interpret these data a direct non-iterative algorithm has been developed. Compared with other methods, for example curve fitting by using Gauss' method, this direct method is numerically stable and allows a simple direct evaluation of the error due to the scattering of experimental data. The method has been applied to the determination of the relaxation times of an unsaturated polyester material.     

幂硬化介质中平面应力动态裂纹的尖端弹塑性场

本文采用塑性动力学方程,对幂硬化介质中平面应力动态裂纹尖端场进行了渐近分析,其结果表明:在裂纹尖端附近,应力具有的奇异性,应变具有的奇异性,其中A是一个与塑性区尺寸有关的常数因子,r是离开裂纹尖端的距离,n为硬化指数,文中给出了尖端场的控制参量D,它依赖于马赫数;并且给出了各物理量的角函数。     

颗粒物质中的奇异现象

通过分析颗粒物质中一些有别于气体、液体和固体的奇异现象,结合生活和生产中的实际例子进一步认识颗粒物质的一些基本特性、规律、有待解决的问题及研究意义.     

左手介质中电磁波的传播速度

在同向介质中,电磁波的群速度一般是能量传播的方向,并且电磁波的相速度和群速度在大部分情况下都满足瑞利关系.为了研究左手介质的电磁特性,本文从理论上导出了左手介质中电磁波的相速度、群速度及其关系,得出左手介质中电磁波的群速度为负,并介绍了左手介质的一些应用前景.     

无明胶重铬酸盐全息记录材料及实时特性

本文简要报道无明胶重铬酸盐全息记录材料的基本特性及其实时效应。实验中获得了正负一级实时衍射效率高达25％的平面透射光栅。     

HL-2M 真空室保温层设计及安装

基于 HL-2M 真空室烘烤保温要求,通过有限元分析和原型件实验确定采用陶瓷纤维与纳米级微孔材 料组合作为 HL-2M 真空室保温材料。在 30℃时,保温层的导热系数小于 0.027W⋅m⁻¹·℃⁻¹;300℃时,导热系数 小于 0.038W⋅m⁻¹·℃⁻¹。在保温层厚度 25mm、热面温度 300℃且达到稳态时,冷面可控制在 85℃以下,线圈侧的 温度低于 60℃,整体热损失小于 12kW,满足 HL-2M 真空室烘烤需求。      

非对称Halo异质栅应变Si SOI MOSFET的二维解析模型

为了进一步提高深亚微米SOI (Silicon-On-Insulator) MOSFET (Metal-Oxide Semiconductor Field Effect Transistor) 的电流驱动能力, 抑制短沟道效应和漏致势垒降低效应, 提出了非对称Halo异质栅应变Si SOI MOSFET. 在沟道源端一侧引入高掺杂Halo结构, 栅极由不同功函数的两种材料组成. 考虑新器件结构特点和应变的影响, 修正了平带电压和内建电势. 为新结构器件建立了全耗尽条件下的表面势和阈值电压二维解析模型. 模型详细分析了应变对表面势、表面场强、阈值电压的影响, 考虑了金属栅长度及功函数差变化的影响. 研究结果表明,提出的新器件结构能进一步提高电流驱动能力, 抑制短沟道效应和抑制漏致势垒降低效应, 为新器件物理参数设计提供了重要参考. 关键词： 非对称Halo 异质栅 应变Si 短沟道效应