Preparation of Y2Ba4Cu7O15-δ Superconductor without High Oxygen Pressure

The synthesis of bulk Y₂Ba₄Cu₇O_15-δ superconductor at atmospheric oxygen pressure via solid state sintering is reported. Temperature ranging from 860 to 890 °C as well as time interval over 2 to 15 days were used to investigate the formation of the Y₂Ba₄Cu₇O_15-δ phase. A time-temperature profile characterizing the conditions for the preparation of Y₂Ba₄Cu₇O_15-δ phase suggests the optimal condition to be sintering at 890 °C for over 10 days. Detailed results of X-ray diffraction, electrical resistivity, iodometric titration and magnetization measurements are described.     

Concentrated electrolyte solutions at high temperatures and pressures

A survey is given of recent experimental results obtained from high-temperature, high-pressure investigations with water, aqueous solutions, and ionic fluids. Data on the static dielectric constant of water to 550°C and 5 kbar are given and discussed with respect to their relation to water structure. Infrared and Raman spectra of HDO in pure water have been obtained to 400°C and 4 kbar, which give information on hydrogen bonding. Xe–H₂O and CO₂–H₂O mixtures were investigated in the infrared. Ni(II) and Cu(II) complexes were investigated by absorption spectroscopy in aqueous solutions of high chloride content to 350°C and 2–6 kbar. The gas-liquid critical point of ammonium chloride was found at 880°C and 1635 bars. This fluid appears to be predominantly ionic even in the critical region. The possibility of converting pure polar fluids such as ammonia and water into concentrated ionic solutions by self-ionization at very high pressures is mentioned.This paper was presented at the symposium, The Physical Chemistry of Aqueous Systems, held at the University of Pittsburgh, Pittsburgh, Pennsylvania, June 12–14, 1972, in honor of the 70th birthday of Professor H. S. Frank.     

煤中有机硫形态结构和热解过程硫变迁特性的研究

利用热解 质谱并结合固定床热解反应装置，对煤中有机硫的形态主其对加氢热解过程 变迁特性的影响，进行了较系统的研究。结果表明，煤中有机硫的形态结构在褐煤中主要以脂肪族、芳香族硫化物为主，而在 煤中则主要以各种不同芳构化程度的噻吩结构为主，初步表明煤中有机硫形态结构随煤变质程度的变迁呈较强的连续递变性。煤热解过程中硫在呼产物中的变迁和分布与煤中有机硫的形态结构特点密切相关。较高芳构化噻吩结构不完全的氧     

高层建筑外附雨篷的表面风压和气动力系数

采用风洞试验方法研究高层建筑外附雨篷的风压特征,分析风压系数、风压相关性、非高斯性和整体升力系数随风向角的变化,给出围护结构的设计风压,最后研究倾角和出挑长度对整体力系数的影响. 研究发现,高层建筑外附雨篷上表面风压系数在正迎风时最大值接近1.4,系气流受到后方高层建筑的阻挡下翻导致;上、下表面的最大整体压力系数出现正迎风情况,最大值分别为1.24和0.76;上、下表面的最大整体升力系数出现侧风面,最大值分别为1.13和1.01;上下叠加后测点风压的非高斯性比单表面增强;上表面和下表面的升力系数在0°~70°风向呈现高斯分布,在80°~180°风向呈现较强的非高斯分布;高层建筑外附雨篷上表面的极值正压大于下表面;雨篷整体升力系数按照倾角-10°、0°、10°依次递增.     

超高压高CO2气藏偏差系数图版扩展与应用

Standing-Katz图版法确定天然气偏差系数是目前最常用、最基础的方法之一,但存在人工读值误差大、在超高压（拟对比压力大于15）和高CO₂含量天然气使用受限等问题。设计单组分偏差系数测定实验,结合Standing-Katz图版曲线变化规律,将图版拟对比压力扩展到30,拟对比温度扩展到3.6,并将图版数字化;基于不同CO₂含量偏差系数测定实验结果,推导了考虑不同CO₂含量的天然气拟临界压力、拟临界温度计算新模型,与常规非烃校正模型相比,新模型计算精度更高,适用范围更广。进一步将新临界参数校正模型嵌入到偏差系数扩展图版中,得到不同CO₂含量的偏差系数扩展图版,该图版在南海西部超高温高压、高CO₂含量天然气偏差系数计算中误差较小（不超过3%）,应用效果良好。     

Stability of the Sarcin/Ricin domain of 28S RNA in rat ribosome under hydrostatic pressure

Under 2 100 bar of hydrostatic pressure, KNA N-glycosidase can still cleave the N-C bond of adenosine at position 4324 in R/S domain of 28S RNA in rat ribosome, demonstrating that high pressure has no effect on the tertiary structure of S/R domain.     

双剪强度理论在水工压力隧洞弹塑性应力分析中的应用

水工压力隧洞的弹塑性分析,工程上一直采用Ｍｏｈｒ－Ｃｏｕｌｏｍｂ强度准则进行求解。但由于该理论和试验结果常常不符,故产生误差。本文应用俞茂宏教授提出的双剪强度理论对水工压力隧洞进行弹塑性分析,解决了上述问题。     

钢筋混凝土薄钢板组合剪力墙的弹性屈曲临界荷载

研究钢筋混凝土薄钢板剪力墙在侧向力作用下的弹性掘曲临界载荷计算问题,提出了相应的计算模型,导出了计算公式,并与相应实验结果比较,符合良好。     

间歇式压滤机的优化研究

在计入洗涤时间这一重要因素的前提下,以间歇式压滤机的生产能力最大为优化目标函数,得出其最佳操作时间,经实例验证,优化效益显著．     

压电陶瓷—明胶复合材料的功能效应与实验分析

分析了锆钛酸铝压电陶瓷－明胶复合材料中的功能效应,并对该功能效应的整个响应过程进行了研究,研究结果表明,在压电陶瓷－明胶复合材料中,明胶渗透压的改变是影响压电陶瓷电信号输出发生变化的主要因素,通过乘积效应原理的应用,对复合材料随外界条件的改变而产生的电信号的输出进行了实验研究和理论推导,分析结果与实验符合较好。