Metal ion distribution and solubility of Mn1−xCux(HCOO)2 · 2 H2O Mixed Crystals [1–5]

The metal ion distribution on the two metal sites of monoclinic Mn_1?xCu_x(HCOO)₂ · 2(H,D)₂O mixed crystals are studied by infrared and Raman spectroscopic methods. The spectral regions 3 200–3 400 cm^?1 (v_OH), 2 875–2 990 cm^?1 (v_CH), 2 330–2 500 cm^?1 (v_OD of matrix isolated HDO molecules), 1 350–1 400 cm^?1 (symmetric CO₂ stretching modes), 570–950 cm^?1 (H₂O librations), and 490 cm^?1 (M? O lattice modes) are mostly sensitive to the metal ions present. The frequency shifts of these bands with increasing content of copper show that Cu²⁺ prefers the M(1) site, coordinated by HCOO^? only. The strengths of the hydrogen bonds increase on going from manganese to copper formate, due to the increased synergetic effect of Cu²⁺. Solubility and X-ray data of the mixed crystals are included. Irrespective of the same crystal structure, two series of mixed crystals are formed: eutonic area at 0.65 ≥ x ≥ 0.5.     

Synthesis and characterization of copolymers of limonene with styrene initiated by azobisisobutyronitrile

The radical copolymerization of limonene with styrene by azobisisobutyronitrile in xylene at 80 ± 0.1 °C for 2 h, under inert atmosphere of N₂, yields alternating copolymers. The kinetic expression is R_p∝[I]^0.5[Sty]^1.0[Lim]^−1.0. The overall activation energy is calculated as 41 kJ/mol. The FTIR and ¹H-NMR spectra of copolymers show bands at 3000 and 1715 cm⁻¹ and peaks at 6.8 δ and 5.3 δ due to phenyl protons of styrene and trisubstituted olefinic protons of limonene, respectively. The values of reactivity ratios r₁(Sty)=0.0625 and r₂(Lim)=0.014, calculated by Kelen-Tüdos method. The Alfrey-Price Q-e parameters for limonene are 0.438 and −0.748, respectively. The penultimate unit effect is favoured in the present system and the value of φ is 38.49.     

Two-beam interference detection of the changes in fibre structural parameters during low drawing process

A Pluta polarizing interference microscope with a fibre stretching device attached was used to detect the changes in molecular structure that occur during the fibre cold drawing process. Fibres drawn with low draw ratios show different types of deformation mechanisms. The interference patterns recorded at different draw ratios are used to relate the deformation mechanisms with the measured structural parameters. Some optical parameters are measured such as; refractive indices nand n birefringence n, the polarizability per unit volume , the orientation distribution function f(θ), the angle θ between the stretching direction and the chain axis, and the angle θ_m which the transition dipole moment of the molecular species makes with the molecular axis (chain axis). Three polymeric fibres (Polyethylene terephthalate PET, Polypropylene PP and Polyamide PA) were used in this study and their interferograms are illustrated.     

Non-destructive and clean prediction of aviation fuel characteristics through Fourier transform-Raman spectroscopy and multivariate calibration

The combination of Fourier transform (FT)-Raman spectroscopy and partial least squares (PLS) regression is proposed to be used in off-line kerosene quality control. Here, six important physico-chemical properties have been studied: Abel flash point, initial boiling point (IBP), 10% of distilled sample, final boiling point (FBP), total percentage of aromatic compounds (% aromatics) and viscosity. The Raman spectra were obtained directly from standard 2 ml glass vials ( mm), using a Bruker RFS 100 FT-Raman spectrometer, equipped with a 1064 nm Nd:YAG laser and a Ge detector, in back-scattering mode and accumulating 25 scans (150 s acquisition time) with a laser power of 300 mW. All Raman spectra were unit normalized in order to avoid the influence of the laser power into the regression models. Different Raman shift spectral ranges have been evaluated, the 193.5-1688.1 cm⁻¹ region being the most satisfactory one. Corrected standard errors of prediction of 1.9, 2.3, 2.8 °C, 0.19 cSt and 0.7% were obtained for flash point, IBP, FBP, viscosity and % aromatics, respectively. The influences of the glass vials, sample positioning and laser power have been studied, as well.     

Synthesis of thermally-induced phase separating polymer with well-defined polymer structure by living cationic polymerization. I. Synthesis of poly(vinyl ether)s with oxyethylene units in the pendant and its phase separation behavior in aqueous solution

Living cationic polymerization of alkoxyethyl vinyl ether [CH₂?CHOCH₂CH₂OR; R: CH₃ (MOVE), C₂H₅ (EOVE)] and related vinyl ethers with oxyethylene units in the pendant was achieved by 1-(isobutoxy)ethyl acetate ( 1 )/Et_1.5AlCl_1.5 initiating system in the presence of an added base (ethyl acetate or THF) in toluene at 0°C. The polymers had a very narrow molecular weight distribution (M?_w/M?_n = 1.1–1.2) and the M?_n proportionally increased with the progress of the polymerization reaction. On the other hand, the polymerization by 1 /EtAlCl₂ initiating system in the presence of ethyl acetate, which produces living polymer of isobutyl vinyl ether, yielded the nonliving polymer. When an aqueous solution of the polymers thus obtained was heated, the phase separation phenomenon was clearly observed in each polymer at a definite critical temperature (T_ps). For example, T_ps was 70°C for poly(MOVE), and 20°C for poly(EOVE) (1 wt % aqueous solution, M?_n ～ 2 × 10⁴). The phase separation for each case was quite sensitive (ΔT_ps = 0.3–0.5°C) and reversible on heating and cooling. The T_ps or ΔT_ps was clearly dependent not only on the structure of polymer side chains (oxyethylene chain length and ω-alkyl group), but also on the molecular weight (M?_n = 5 × 10³-7 × 10⁴) and its distribution. © 1992 John Wiley & Sons, Inc.     

多Agent组织的一种矩阵结构

借鉴人类现代组织理论，给出了Agent组织的一种矩阵模型描述。相比层次结构的组织，加强了组织横向之间的联系，增加了管理幅度，减少了组织的层次，从而降低了交互通信代价，提高了组织的求解效率和组织对外部环境的快速反应能力。     

论语篇作为翻译教学中的基本单位

对我国翻译教学的现状及存在的问题，本文指出进行以语篇为基本单位的翻译．教学是提高翻译课教学效果的一条行之有效的途径。     

鄂尔多斯盆地侯北地区三叠系延长组长6储层特征

鄂尔多斯盆地侯北地区三叠系延长组长6储集岩大部分为细粒长石砂岩,少数为细粒岩屑长石砂岩.孔隙度在10%～15%之间,渗透率在(0.1～1.0)×10-3μm2之间,以低孔、低渗、较强的非均质性为特点.长6沉积于三角洲前缘环境,水下分流河道中发育储集砂体.稳定的大地构造条件和沉积环境有利于大面积、较厚的砂体形成.方解石、浊沸石和绿泥石等自生矿物沉淀压实作用,大大降低了原始沉积物孔隙度,长石、中基性火山岩岩屑及浊沸石溶蚀作用产生了相当数量的粒内溶蚀孔和胶结物溶蚀孔.     

风机盘管加新风系统对室内相对湿度控制能力的分析

对风机盘管的运行调节方式和选型方法进行了分析，动态模拟了风机盘管加新风系统在实际运行中的室内相对湿度变化，揭示了夏季室内相对湿度超标的原因，并对风机盘管加新风系统的设计选型提出了改进的方法。     

煤矿井下开掘工作面双风机双电源自动切换的实现

为了进一步保证矿井安全生产，减少井下掘进工作面无计划停风，采用双风机双电源自动切换对掘进工作面供风。介绍了双风机双电源及自动切换通风系统的组成和功能，阐述了自动切换装置的设计思路和工作原理以及日常运行和维护的要点。