碱性膜燃料电池阳极碳酸化模型研究

碱性聚电解质燃料电池（APEFC）近年来取得了可观的进展,但是在使用空气作为氧化剂工作时仍然面临着性能损失. 文献中已有多个理论试图解释性能损失的来源,但是缺乏定量化的分析. 本文根据实验发现和热力学及阳极反应的动力学分析,提出了分层的阳极碳酸化模型和方程组.模型的定量化模拟结果进一步和实验结果进行验证,提出了电池性能损失的可能原因.     

Electrochemical CO2 reduction reaction on cost-effective oxide-derived copper and transition metal–nitrogen–carbon catalysts

The electrochemical CO₂ reduction reaction (CO₂RR) either to generate multicarbon (C₂₊) or single carbon (C₁) value-added products provides an effective and promising approach to mitigate the high CO₂ concentration in the atmosphere and promote energy storage. However, cost-effectiveness of catalytic materials limits practical application of this technology in the short term. Herein, we summarize and discuss recent and advanced works on cost-effective oxide-derived copper catalysts for the generation of C₂₊ products (hydrocarbons and alcohols) and transition metal–nitrogen–doped carbon electrocatalytic materials for C₁ compounds production from CO₂RR. We think they represent suitable electrocatalyst candidates for scaling up electrochemical CO₂ conversion. This short review may provide inspiration for the future design and development of innovative active, cost-effective, selective and stable electrocatalysts with improved properties for either the production of C₂₊ (alcohols, hydrocarbons) or carbon monoxide from CO₂RR.     

An overview of emerging pollutants in air: Method of analysis and potential public health concern from human environmental exposure

Air pollutants are perhaps the largest cause of diseases and death in the world today. Increasing urbanization and industrialization have caused an increase in number of diverse forms and types of new pollutants, which are difficult to detect and characterize due to their stench behaviour and complex sources of production. Such pollutants have been called emerging pollutants (EPs) and their list is ever increasing. Therefore, the understanding of the method of analysis and health implication of (EPs) in air is critical to providing a more robust understanding of exposure routes, regulations and mitigation. EPs in air discussed in this study are not in any way exhaustive but limited to emerging VOCs (including acrylonitrile, 1−3-butadiene, chloroform, dichloromethane, ethylene oxides, formaldehyde, toluene, trichloroethylene, 1,4-Dioxane) and metals (arsenic, manganese, and vanadium), ultrafine particles, micro- and nano- plastics, engineered nanoparticles, diesel/black carbon and bioaerosols. Occurrence, detection and health implications of these EPs in air are still unfolding due to limited monitoring studies, lack of standard methodology and regulations. To address this knowledge gap, authors conducted an in-depth review of available information. Their spatial distribution, analytical methods and health implications are discussed including the novel coronavirus (COVID-19) as a potential EP in air. The study concluded with highlights of gaps in knowledge and suggestions to key areas for future research. This information is of general interest to environmental scientists and of specific interest to both health and sanitation workers and policymakers at private, government and international organizations.     

Biochar-Based Graphitic Carbon Nitride Adorned with Ionic Liquid Containing Acidic Polymer: A Versatile,Non-Metallic Catalyst for Acid Catalyzed Reaction

A novel biochar-based graphitic carbon nitride was prepared through calcination of Zinnia grandiflora petals and urea. To provide acidic and ionic-liquid functionalities on the prepared carbon, the resultant biochar-based graphitic carbon nitride was vinyl functionalized and polymerized with 2-acrylamido-2-methyl-1-propanesulfonic acid, acrylic acid and the as-prepared 1-vinyl-3-butylimidazolium chloride. The final catalytic system that benefits from both acidic (–COOH and –SO₃H) and ionic-liquid functionalities was applied as a versatile, metal-free catalyst for promoting some model acid catalyzed reactions such as Knoevenagel condensation and Biginelli reaction in aqueous media under a very mild reaction condition. The results confirmed high activity of the catalyst. Broad substrate scope and recyclability and stability of the catalyst were other merits of the developed protocols. Comparative experiments also indicated that both acidic and ionic-liquid functionalities on the catalyst participated in the catalysis.     

CoMnO2-Decorated Polyimide-Based Carbon Fiber Electrodes for Wire-Type Asymmetric Supercapacitor Applications

In this work, we report the carbon fiber-based wire-type asymmetric supercapacitors (ASCs). The highly conductive carbon fibers were prepared by the carbonized and graphitized process using the polyimide (PI) as a carbon fiber precursor. To assemble the ASC device, the CoMnO₂-coated and Fe₂O₃-coated carbon fibers were used as the cathode and the anode materials, respectively. Herein, the nanostructured CoMnO₂ were directly deposited onto carbon fibers by a chemical oxidation route without high temperature treatment in presence of ammonium persulfate (APS) as an oxidizing agent. FE-SEM analysis confirmed that the CoMnO₂-coated carbon fiber electrode exhibited the porous hierarchical interconnected nanosheet structures, depending on the added amount of APS, and Fe₂O₃-coated carbon fiber electrode showed a uniform distribution of porous Fe₂O₃ nanorods over the surface of carbon fibers. The electrochemical properties of the CoMnO₂-coated carbon fiber with the concentration of 6 mmol APS presented the enhanced electrochemical activity, probably due to its porous morphologies and good conductivity. Further, to reduce the interfacial contact resistance as well as improve the adhesion between transition metal nanostructures and carbon fibers, the carbon fibers were pre-coated with the Ni layer as a seed layer using an electrochemical deposition method. The fabricated ASC device delivered a specific capacitance of 221 F g⁻¹ at 0.7 A g⁻¹ and good rate capability of 34.8% at 4.9 A g⁻¹. Moreover, the wire-type device displayed the superior energy density of 60.2 Wh kg⁻¹ at a power density of 490 W kg⁻¹ and excellent capacitance retention of 95% up to 3000 charge/discharge cycles.     

Synthesis of Supported Heterogeneous Catalysts by Laser Ablation of Metallic Palladium in Supercritical Carbon Dioxide Medium

To obtain a supported heterogeneous catalyst, laser ablation of metallic palladium in supercritical carbon dioxide was performed in the presence of a carrier, microparticles of γ-alumina. The influence of the ablation process conditions—including supercritical fluid density, ablation, mixing time of the mixture, and laser wavelength—on the completeness and efficiency of the deposition of palladium particles on the surface of the carrier was studied. The obtained composites were investigated by scanning and transmission electron microscopy using energy dispersive spectroscopy. We found that palladium particles were nanosized and had a narrow size distribution (2–8 nm). The synthesized composites revealed high activity as catalysts in the liquid-phase hydrogenation of diphenylacetylene.     

Emerging Bottom‐Up Strategies for the Synthesis of Graphene Nanoribbons and Related Structures

The solution‐phase synthesis is one of the most promising strategies for the preparation of well‐defined graphene nanoribbons (GNRs) in large scale. To prepare high quality, defect‐free GNRs, cycloaromatization reactions need to be very efficient, proceed without side reaction and mild enough to accommodate the presence of various functional groups. In this Minireview, we present the latest synthetic approaches for the synthesis of GNRs and related structures, including alkyne benzannulation, photochemical cyclodehydrohalogenation, Mallory and Pd‐ and Ni‐catalyzed reactions.     

Sorbents for the Direct Capture of CO2 from Ambient Air

The urgency to address global climate change induced by greenhouse gas emissions is increasing. In particular, the rise in atmospheric CO₂ levels is generating alarm. Technologies to remove CO₂ from ambient air, or “direct air capture” (DAC), have recently demonstrated that they can contribute to “negative carbon emission.” Recent advances in surface chemistry and material synthesis have resulted in new generations of CO₂ sorbents, which may drive the future of DAC and its large‐scale deployment. This Review describes major types of sorbents designed to capture CO₂ from ambient air and they are categorized by the sorption mechanism: physisorption, chemisorption, and moisture‐swing sorption.     

Online Monitoring of Electrochemical Carbon Corrosion in Alkaline Electrolytes by Differential Electrochemical Mass Spectrometry

Carbon corrosion at high anodic potentials is a major source of instability, especially in acidic electrolytes and impairs the long‐term functionality of electrodes. In‐depth investigation of carbon corrosion in alkaline environment by means of differential electrochemical mass spectrometry (DEMS) is prevented by the conversion of CO₂ into CO₃^2?. We report the adaptation of a DEMS system for online CO₂ detection as the product of carbon corrosion in alkaline electrolytes. A new cell design allows for in situ acidification of the electrolyte to release initially dissolved CO₃^2? as CO₂ in front of the DEMS membrane and its subsequent detection by mass spectrometry. DEMS studies of a carbon‐supported nickel boride (Ni_xB/C) catalyst and Vulcan XC 72 at high anodic potentials suggest protection of carbon in the presence of highly active oxygen evolution electrocatalysts. Most importantly, carbon corrosion is decreased in alkaline solution.     

Production of Hydrogen Peroxide by Photocatalytic Processes

Hydrogen peroxide (H₂O₂) has received increasing attention because it is not only a mild and environmentally friendly oxidant for organic synthesis and environmental remediation but also a promising new liquid fuel. The production of H₂O₂ by photocatalysis is a sustainable process, since it uses water and oxygen as the source materials and solar light as the energy. Encouraging processes have been developed in the last decade for the photocatalytic production of H₂O₂. In this Review we summarize research progress in the development of processes for the photocatalytic production of H₂O₂. After a brief introduction emphasizing the superiorities of the photocatalytic generation of H₂O₂, the basic principles of establishing an efficient photocatalytic system for generating H₂O₂ are discussed, highlighting the advanced photocatalysts used. This Review is concluded by a brief summary and outlook for future advances in this emerging research field.