焙烧态镁铝水滑石对茜素黄GG的吸附

用尿素水解均匀沉淀法制备一系列不同的Mg2+与Al3+摩尔比的镁铝水滑石(Mg/Al-LDHs),并研究了镁铝水滑石的焙烧产物(LDO)对阴离子染料茜素黄GG的吸附特征。分别考察了不同镁铝摩尔比的LDO、LDO投加量、反应温度、染料的初始浓度等因素对LDO吸附阴离子染料茜素黄GG的影响。结果表明,对于150mL 30mg/L的茜素黄GG模拟废水溶液,镁铝摩尔比为1:2的镁铝水滑石,投加量为30mg,在25℃下反应150min,去除率可达到100%。三次回收重复利用的LDO对茜素黄的去除率仍为76%以上,LDO是一种良好的环保吸附材料。     

Phenolic resin as a carbon source for the synthesis of monometallic Mo and bimetallic CoMo carbides via carbothermal reduction route

It was the first time that phenolic resin (PR) was used as a carbon source for the synthesis of nanostructured monometallic Mo and bimetallic CoMo carbides via carbothermal reduction route. The results showed that phase-pure β-Mo₂C can be formed under an Ar atmosphere at 900°C or a H₂ atmosphere above 700°C. However, almost pure CoMo carbides (Co₃Mo₃C and Co₆Mo₆C) can be obtained only under a H₂ atmosphere at a low temperature of 630°C for 24 and 48 h, respectively. The role of PR in the preparation process has been investigated and a detailed formation mechanism was proposed based on the experimental results.     

Improved Method for the Determination of Polychlorinated Dibenzo-p-dioxins and Dibenzofurans (PCDD/Fs) in Sanitary Napkins

Abstract

An improved method was developed for determining highly toxic 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins and polychlorinated dibenzo-p-furans (PCDD/Fs) in sanitary napkins. Samples were extracted by Soxhlet (50% dichloromethane/hexane) and sonication (hexane), and a multi-layer silica column was used for clean-up after acetone precipitation to separate the superabsorbent polymers. Improved separation efficiency of PCDD/Fs from sanitary napkins with a high level of superabsorbent polymers was achieved using the acetone precipitation method. Hexane was then applied as an alternative solvent to remove residual interfering substances including sticky components contained on sanitary napkins via alumina column chromatography in the second clean-up step. Recoveries approached 100% with an average relative standard deviation of less than 15%, and recoveries of internal standards were from 70.5 to 114.8% and 0.6 to 13.6% for the two extraction methods. The mean method detection limit was 0.075–0.968?pg/g for Soxhlet extraction and 0.0032–0.091?pg/g for sonication extraction. The established method meets the quality criteria for the screening of dioxins stated in EU Regulations 589/2014 and 709/2014, and therefore provides a suitable alternative for the determination of dioxins in sanitary napkins containing superabsorbent polymers.     

沉淀法制备介孔二氧化铈

以硫酸高铈、二乙烯三胺为原料,氨水做沉淀剂,合成了具有立方萤石晶相结构的介孔二氧化铈(CeO2),讨论了反应物配比、反应温度、氨水的加入量等实验条件对介孔CeO2比表面积的影响.通过X射线衍射、BET孔径性能测试等分析手段对产物进行了表征,实验结果表明:在硫酸高铈与二乙烯三胺的摩尔比为1∶2,反应温度为80℃,陈化时间为12 h的条件下,制得了比表面积为157 m2/g的介孔CeO2.     

Supercritical fluid chromatography tandem mass spectrometry employed with evaporation-free liquid–liquid extraction for the rapid analysis of cinnarizine in rat plasma

Cinnarizine is a weak base, which can produce supersaturation and precipitation during gastrointestinal transit, affecting its absorption in vivo. Therefore, it is necessary to investigate whether the oral bioavailability of cinnarizine can be improved after co-administration with precipitation inhibitors or not. In order to evaluate the pharmacokinetic behavior of cinnarizine in rats, a simple, rapid, sensitive, and environmentally friendly supercritical fluid chromatography-tandem mass spectrometric method was established and validated. In this method, flunarizine, a structural analogue of cinnarizine, was selected as the internal standard, and cinnarizine was extracted from rat plasma using evaporation-free liquid–liquid extraction method. The analytes were separated on a Torus 1-AA column (3.0 mm × 100 mm, 1.7 μm) within 2.0 min, using a gradient elution procedure. The transitions of cinnarizine and flunarizine were m/z 369.1 → 167.1 and m/z 405.1 → 203.1, respectively. Cinnarizine showed good linear correlation in the range of 1–500 ng/ml with a lower limit of quantification of 1 ng/ml. The intra- and interday precision and accuracy of all quality control samples were within ±15%. This high-throughput, accurate, sensitive, and reproducible method has been successfully applied to study the effects of the precipitation inhibitor cinnarizine on the pharmacokinetics in rats.     

Effect of Nb,Ti, and W ion implantation on surface properties and cell compatibility of silicon carbide

Silicon carbide is considered as a bio-inert semiconductor material; consequently, it has been proposed for potential applications in human body implantation. In this study, we study the effect of implanting different metal ions on the surface properties of silicon carbide single crystal. The valence states of the elements and the surface roughness of implanted SiC were studied using X-ray photoelectron spectroscopy and atomic force microscope, respectively. Osteoblastic MG-63 cells were utilized to characterize the cytocompatibility of ion implanted SiC. The results show that after Nb ion implantation on the SiC surface, it mainly exists in the form of Nb–C bond, Nb–O bond, and a small amount of metallic niobium. The titanium implanted on SiC primarily forms Ti-C bond and Ti-O bond. The tungsten implanted on SiC mostly presents as metallic tungsten and W–O bond. The roughness of silicon carbide single crystal is improved by ion implantation of all three metal ions. Ion implantation of titanium and niobium can improve the cell compatibility and hydrophilicity of silicon carbide, whereas ion implantation of tungsten reduces the cell compatibility and hydrophilicity of silicon carbide.     

低温加氢催化剂的设计: 理论与实践

简要总结了我们在C=C及C=O双键低温加氢双金属催化剂方面的最新研究成果. 首先, 我们以环己烯加氢为探针反应, 证明了平行使用多种研究手段的重要性, 包括单晶表面的基础研究与DFT计算, 多晶表面的合成与表征, 负载型催化剂的制备与性能测试等. 其次, 总结了双金属催化剂在其他加氢反应, 如丙烯醛C=O双键的选择性加氢, 苯的低温加氢, 以及乙炔的选择性加氢等反应中的应用. 最后, 讨论了利用金属碳化物代替贵金属Pt以减少双金属催化剂中Pt用量的可能性.     

XRD-Studies of SiC/Si layers on carbon substrates

Structural investigations of thin films of SiC, SiC with free silicon and various titanium suicides (TiSi₂, TiSi and Ti₅Si₃) are described. The crystal phases have been identified using X-ray diffractometry. The growth of reaction products from surface reactions between silicon and deposited titanium can be observed.Dedicated to Professor Dr. rer.nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Interpretation of Auger depth profiles of thin SiC layers on Si

Silicon carbide thin films, prepared by carbonization of Si-wafers are analysed by Auger depth profiling. The influence of atomic mixing is simulated with a Monte Carlo model. By using mixing simulations the dependence of the two mixing parameters (width of the mixing zone and recoil depth) on ion beam energy, incidence angle and ion mass can be calculated. For comparison of the simulated data with Auger measurements an Auger electron escape depth correction is necessary. The simulated and -corrected data of several layer structures show good qualitative agreement with Auger depth profiles of thin carbonized SiC-layers.Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Synergistic Effect of Boron Nitride and Carbon Domains in Boron Carbide Nitride Nanotube Supported Single-Atom Catalysts for Efficient Nitrogen Fixation

Developing the low-cost and efficient single-atom catalysts (SACs) for nitrogen reduction reaction (NRR) is of great importance while remains as a great challenge. The catalytic activity, selectivity and durability are all fundamentally related to the elaborate coordination environment of SACs. Using first-principles calculations, we investigated the SACs with single transition metal (TM) atom supported on defective boron carbide nitride nanotubes (BCNTs) as NRR electrocatalysts. Our results suggest that boron-vacancy defects on BCNTs can strongly immobilize TM atoms with large enough binding energy and high thermal/structural stability. Importantly, the synergistic effect of boron nitride (BN) and carbon domains comes up with the modifications of the charge polarization of single-TM-atom active site and the electronic properties of material, which has been proven to be the essential key to promote N₂ adsorption, activation, and reduction. Specifically, six SACs (namely V, Mn, Fe, Mo, Ru, and W atoms embedded into defective BCNTs) can be used as promising candidates for NRR electrocatalysts as their NRR activity is higher than the state-of-the art Ru(0001) catalyst. In particular, single Mo atom supported on defective BCNTs with large tube diameter possesses the highest NRR activity while suppressing the competitive hydrogen evolution reaction, with a low limiting potential of −0.62 V via associative distal path. This work suggests new opportunities for driving NH₃ production by carbon-based single-atom electrocatalysts under ambient conditions.