教学与科学研究交融的物理实验创新设计

以应用复合型人才为培养目标,以教学与科学研究交融的育人观为指导,通过科研内容提取移植、由企业生产和日常生活实际提升、由已有教学研究成果固化等多种渠道,在较高层次物理实验课程与实践教学中创新设计出一批物理与社会应用、物理与海洋、物理与生物、物理与环境等多学科交叉的具有海洋特色的实验项目,使实验教学内容与科研、工程、社会应用实践密切联系。通过这样的实验项目开设,培养学生学习兴趣,提高学生学习能力、实践应用能力、研究创新能力。     

大学物理演示实验网络教学管理平台构建与实施

详细介绍了我校开发的“大学物理演示实验网络教学管理平台”的框架,其在教学管理中所发挥的作用,运行的效果,特别是在低年级本科生创新能力培养中所显现的效果.     

酶法制备微孔淀粉的工艺研究

使用α-淀粉酶与糖化酶复合制备多孔淀粉,探讨反应温度、反应时间、pH值和酶用量等条件的影响,并且通过正交实验得出最佳工艺条件,当反应温度为50℃,pH值为6.0,反应时间为12h,酶用量为1.0%时,吸附率与得率的综合评定最高.     

中国足球与世界强队的技术差距分析

通过对2002年世界杯足球赛区C组的3场比赛研究,得出中国队实力仅占世界足球强队实力61%左右的结论.中国队缺少主动进攻和主动配合协调能力,保守特征明显,需要放下包袱,发扬敢攻、敢踢精神,加强训练,多参加国际比赛来提高综合实力.     

黄土地区水平荷载作用下闭合型地下连续墙基础承载 性状分析

地下连续墙基础相对于一般桩基础的一个显著特点就是整体刚度大,水平荷载作用下基础一般有两种工作状态和破坏机理:其一是刚性短桩,表现为转动或平移破坏;其二是弹性长桩,表现为挠曲破坏。数值模拟表明:在一定范围内随着墙体埋深的增加,在大小相等的水平荷载作用下,基础埋深越大,其水平位移则越小。但埋深超过30m后,墙体埋深对基础的水平变形影响变得不显著。即当闭合墙体的埋深超过一定深度后,过分的加大闭合墙体的埋深无助于提高基础的水平承载性能。     

空心微珠/Al复合材料的动态压缩力学性能和吸能特性

利用分离式霍普金森压杆（split Hopkinson pressure bar,SHPB）系统对空心微珠体积分数为0.4的空心微珠/1199Al复合泡沫在1 700~2 900s^-1应变率范围内的动态压缩力学性能、吸能性能进行了研究,还利用SEM扫描电镜对压缩试件断口进行微观组织分析,与准静态条件下材料的压缩力学性能及压缩变形机制进行了对比。结果表明,空心微珠/1199Al复合泡沫是一种应变率敏感材料,与准静态结果相比,在高应变率下复合材料的流动应力和塑性应变有明显的增大,应变率硬化效应对复合材料的流动应力的影响明显大于应变硬化的影响。复合材料的准静态和动态压缩变形机制存在一定差异,动态载荷作用下,空心微珠/1199Al复合泡沫内部空心微珠的压缩和基体材料的充填同时发生,组分之间具有良好的协调变形能力。

     

Novel miniature high power ring filter

The power handling capability of high temperature superconducting (HTS) filters is limited due to current concentration at the edges of the superconducting films. This problem can be overcome by using ring resonator, which employs the edge current free and reduces the current concentration. However, this kind of filter has large size. In order to reduce the cost and size and increase the power handling capability, in this paper a HTS photonic bandgap (PBG) structure filter is developed. The proposed pass band filter with PBG structure exhibits center frequency 12.23 GHz, steepness (about 35 dB/GHz), bandwidth (−3 dB bandwidth is 0.045 GHz), and low insertion loss (about −0.5 dB), and can handle input power up to 1 W (this value was limited by the measurement instrument used in the experiment). The size is reduced by 25%, insertion loss reduced by 37.5%, and steeper roll-off of the filter is also obtained compared with that in published literature.     

Validation of HPLC Analysis of 2-Phenoxyethanol, 1-Phenoxypropan-2-ol, Methyl, Ethyl, Propyl, Butyl and Benzyl 4-Hydroxybenzoate (Parabens) in Cosmetic Products, with Emphasis on Decision Limit and Detection Capability

The Commission Decision of August 12, 2002 on the performance of analytical methods and the interpretation of results was applied to the HPLC method for the analysis of parabens, 2-phenoxyethanol and 1-phenoxypropan-2-ol in cosmetic products. This method is published in the seventh Directive 96/45/EC of the European Commission. Non-compliant concentrations, taking into account the data distribution (CC) and the probability of false negative values (CC) were determined. The repeatability and reproducibility amount to <4% and <7%, respectively. These values were obtained with blanc samples that were fortified in the laboratory. Calibration linearity was confirmed by absence of lack of fit for all seven preservatives. Matrix effects on the determinations of the preservatives in body milk or shampoo are negligible.     

Maintenance of Soft Calibration Models in the Determination of Zinc,Cadmium, Lead and Copper by Differential Pulse Anodic Stripping Voltammetry

A strategy for constructing a global multivariate calibration model that includes calibration samples measured over time on different days is developed and applied in electroanalysis. Both synthetic and real samples (tap, extracted and river water) are analyzed by differential‐pulse anodic stripping voltammetry, showing the suitability of the global model constructed that provides successful results similar to those of the usual multivariate calibration. In addition the capability of discrimination of this model is evaluated in prediction for the mean of three replicates with estimation of probability of false noncompliance, α, and false compliance, β, being found 3.1, 11.2, 6.7 and 64.7 nM for nominal concentrations of zinc, cadmium, lead and copper of 96.0, 40.4, 37.3 and 328.0 nM respectively when α=β=0.05. It has been proven that the use of the global calibration does not imply a loss of multivariate analytical sensitivity, using this parameter as quality index of the analytical procedure. The viability of using calibration maintenance strategies with electroanalytical techniques is shown, providing a way to save time and experimental effort when these techniques are used in routine analysis.     

尖晶石型LiMn1.9Al0.1O3.95F0.05材料的制备及其增强的倍率性能

通过溶胶-凝胶和高温固相掺杂反应可控合成了形貌均匀、结晶性好的尖晶石型LiMn_1.9Al_0.1O_3.95F_0.05正极材料,探究了Al部分取代Mn、F部分取代O后对结构的影响,测试并比较了电极材料的倍率性能和循环充放电性能. 结果表明,尖晶石型LiMn_1.9Al_0.1O_3.95F_0.05和LiMn₂O₄有同样的晶型,但电极较传统的LiMn2O4电极倍率稳定性有显著提高. 在连续混合（如0.1C、0.5C和1C）充放电150次后,LiMn_1.9Al_0.1O_3.95F_0.05电极的容量仍能保持90%以上.