以钛氧有机物为前驱物制备具有高光催化活性的纳米二氧化钛晶体

 纳米二氧化钛的制备方法及前驱物的差别影响其光催化活性．将20ml钛酸丁酯及30ml乙酐在密闭容器中与50ml环己烷混合，在70～85℃反应30min，生成微细的非晶钛氧有机物；经FT－IR和TGA分析，该物质被确认为计量式是TiOOOCCH3）2和TiO（OC4H9）（OOCCH3）的混合体．该钛氧有机物前驱物经焙烧后得到具有高光催化活性的纳米二氧化钛晶体．表征结果表明，钛氧有机物在焙烧过程中，其表面的吸附物及键合有机基团在400℃以前发生脱附和氧化分解；在389～405℃间形成锐钛矿型晶体，在600℃出现金红石晶型；600℃焙烧3h所得样品的比表面积为86m2／g，其二次粒子呈200～300nm条形体，孔隙大于20nm；单分散粒子为球形单晶，粒径为22nm；表面物理吸附水量为1．21％，加热至800℃时失重1．48％，粉体稳定纯净．光催化实验结果表明，以钛氧有机物为前驱物制备的纳米二氧化钛晶体具有高的光催化活性，光降解丁基罗丹明溶液的反应速率常数约为溶胶－凝胶法制备的催化剂样品的4倍．表面氧空缺和一定量的表面羟基可能是粉体具有高光催化活性的重要因素．     

Thermal behaviour of styrene butadiene rubber/poly(ethylene-co-vinyl acetate) blends

The thermal behaviour of styrene butadiene rubber (SBR)/poly (ethylene-co-vinyl acetate) (EVA) blends was studied by using thermogravimetry (TG) and differential scanning calorimetry (DSC). The effects of blend ratio, cross-linking systems and compatibilization on the thermal stability and phase transition of the blends were analyzed. It was found that the mass loss of the blends at any temperature was lower than that of the components, highlighting the advantage of blending SBR and EVA. The addition of compatibilizer was also found to improve the thermal stability. DSC studies indicated the thermodynamic immiscibility of SBR/EVA system even in the presence of the compatibilizer. This is evident from the presence of two different glass transition temperatures, corresponding to SBR and EVA phases in both compatibilized and uncompatibilized blends.     

接枝和交联对纳米Si02改性NR／PP共混型热塑弹性体的影响

动态硫化制备纳米二氧化硅（SiO2）改性天然橡胶，聚丙烯共混型热塑性弹性体（NR/PPTPE）．研究了马来酸酐，苯乙烯，过氧化二异丙苯（MAH／St／DCP）多单体“就地”熔融接枝、交联对TPE力学性能、耐溶剂性能和耐热变形性能的影响，并用SEM分析了TPE的断面形貌．结果表明：纳米SiO2和MAH／St／DCP的最佳质量分数分别为0．03和0．0375／0．0188／0．00375时，MAH／St／DCP接枝、交联改性NR／PP／纳米SiO：TPE的力学性能、耐溶剂性能和耐热变形性能最佳．MAH／St／DCP“就地”接枝、交联通过细化交联NR分散相、改善交联NR分散的均匀性和增加两相之间的共交联，使NR与PP两相界面结合强度明显提高，NR／PPTPE的综合性能得到明显的改善．     

高硅ZSM—5沸石填充硅橡胶膜的醇—水渗透蒸发分离性质

高硅ZSM－5沸石填充疏水性硅橡胶蓦地低浓度醇－水体度醇－水体的渗透蒸发性质的研究有明，提高沸石硅铝比，增加填充量以及进行酸处理皆有利于改善膜对醇－水的分离系数和通量。料液的成，浓度以及温度对膜的分离性质也有显著影响。     

SBS与甲基丙烯酸丁酯本体接枝反应的研究

本文研究了以过氧化苯甲酰(BPO)为引发剂,甲基丙烯酸丁酯(BMA)既作溶剂又作为单体与苯乙烯-丁二烯嵌段共聚物(SBS)进行接枝共聚反应。用红外光谱、核磁共振谱及透射电镜表征了接枝共聚物(SBS-g-BMA)的组成及结构,讨论了时间、温度及SBS和BPO的用量对接枝的影响。     

固体超强酸催化剂SO_4~(2-)/TiO_2-WO_3的制备及其催化性能研究

制备了固体超强酸催化剂SO2 -4/TiO2 WO3 ,并以丁酸丁酯的合成作为探针反应 ,系统考察了WO3 的含量、硫酸浸渍浓度、焙烧温度等制备条件对SO2 -4/TiO2 WO3 催化活性的影响 .实验表明 :制备催化剂的适宜条件为m(H2 WO4) =12 5 % ,硫酸浸渍浓度为 1 0mol·L-1,焙烧温度为 5 80℃ ,活化时间 3h .利用优化条件下制备的催化剂SO2 -4/TiO2 WO3 催化合成缩醛 (酮 ) ,在醛 /酮与二元醇 (乙二醇 ,1,2 丙二醇 )的投料摩尔比为 1∶1 5 ,催化剂的用量占反应物总投料质量的 0 5 % ,反应时间为 1h条件下 ,2 甲基 2 乙氧羰甲基 1,3 二氧环戊烷的收率为 78 7% ,2 ,4 二甲基 2 乙氧羰甲基 1,3 二氧环戊烷的收率为 83 0 % ,环己酮 -乙二醇缩酮的收率为 85 9% ,环己酮 1,2 丙二醇缩酮的收率为 84 6% ,丁酮 -乙二醇缩酮的收率为70 7% ,丁酮 1,2 丙二醇缩酮的收率为 88 3 % ,2 丙基 1,3 二氧环戊烷的收率为 80 6% ,4 甲基 2 丙基 1,3 二氧环戊烷的收率为 79 6% ,2 异丙基 1,3 二氧环戊烷的收率为 64 2 % ,4 甲基 2 异丙基 1,3 二氧环戊烷的收率为 83 3 % ,2 苯基 1,3 二氧环戊烷的收率为 75 3 % ,4 甲基 2 苯基 1,3 二氧环戊烷的收率为 95 1% .     

Refining adsorption parameters of n-butyl alcohol at the interface of mercury electrode with aqueous NaF and Na2SO4 solutions by correcting the adsorbate concentration

As an adjunct to the regression analysis of differential capacitance curves, which allows refining the adsorption parameters, a program, which takes into account possible errors in volume concentrations of organic substances, is developed. Using this procedure, the earlier data on the differential capacitance of a mercury electrode in aqueous solutions of normal butanol (1-BuOH) containing either 0.1 M NaF or 0.05 and 0.5 M Na₂SO₄ as the supporting electrolyte are analyzed. This allows obtaining the most accurate values of adsorption parameters for the systems mentioned above within the framework of the model of two parallel capacitors and the Frumkin isotherm. It is shown that, when a linear dependence of the intermolecular interaction parameter on the electrode potential is taken into account, the standard deviation of experimental capacitance values from those calculated using the mentioned model is 6.8–8.8%, which points to very high accuracy of this phenomenological model.     

聚氯乙烯—丁腈橡胶—氯丁橡胶三元共混物的研究

测定了聚氯乙烯（ＰＶＣ）－丁脯橡胶（ＮＢＲ－２９）－氯丁橡胶（ＣＲ）三元共混物的冲击性能和应力－应变行为，用动态力分析、扫描电和透射电镜研究了共混物的相容性和形态结构。结果表明，ＮＢＲ－２９对ＰＶＣ，ＣＲ有良好的增容作用，三元共混物是部分相容的二相体系，具有良好的抗冲击性能。     

Loss and recovery in hydrophobicity of silicone rubber exposed to corona discharge

This paper describes the loss and recovery in the hydrophobicity of unfilled high temperature vulcanized silicone rubber (HTV-SR) resulting from corona discharge. In this study, HTV-SR specimens were exposed to corona stress generated by a parallel needle-plane electrode system, and physicochemical analyses on the surface layer of SR before and after corona discharge treatment were carried out by using Fourier transform infra-red (FTIR) spectroscopy, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). It is demonstrated that hydrophilic OH groups that are by-products of ageing can be formed instead of hydrophobic CH₃ groups on the surface of aged SR and the corona discharge plays an important role on the temporary loss of hydrophobicity. After a substantial period of ‘rest’, the hydrophobic recovery of SR results from the diffusion of low-molecular weight (LMW) silicone fluid from the bulk onto the aged layer.     

高抗冲聚苯乙烯的增韧机理

概述了以高抗冲聚苯乙烯（ＨＩＰＳ）为中心的有关橡胶增韧机理的理论，并且总结了界面，性能、粒子尺寸、粒 距及缠结密度等因素对橡胶／高分子共混体系性能的影响。