芳香PET树脂母粒的研制

通过丙烯酸和丙烯酸正丁酯溶液共聚合，得到丙烯酸－丙烯酸正丁酯共聚物，该树脂与环氧氯丙烷反应后再与PET树脂切片继续反应，可使PET树脂切片表面形成聚丙烯酸酯自膨润型吸油网络结构，将表面具有聚丙烯酸酯自身膨润型吸油网络结构的PET树脂切片（简称为留香剂）在油溶性香精中浸泡，香精就被吸附在留香剂表面，即得到芳香PET树脂母粒。用SEM观察了母粒的表面结构形态。     

聚酰亚胺中空纤维膜用于甲醇/甲基叔丁基醚的分离

甲醇／甲基叔丁基醚混合物的膜法分离，大多采用渗透汽化方法，少有采用蒸汽渗透法。用聚酰亚胺中空纤维膜，对以蒸汽渗透和渗透汽化两种方式分离甲醇／甲基叔丁基醚混合物（甲醇质量分数为0．01－0．30）的效果进行了对比。结果显示，在甲醇质量分数低于0．05时，蒸汽渗透较渗透汽化法的分离性能优越。     

Theoretical Study on the Kinetics of Electron Transfer for Bond—breaking Reaction

ＩｎｔｒｏｄｕｃｔｉｏｎＦｒｅｅｒａｄｉｃａｌｆｏｒｍａｔｉｏｎｆｒｏｍｈａｌｏｇｅｎａｔｅｄｈｙｄｒｏｃａｒｂｏｎｓｈａｓｒｅｃｅｉｖｅｄｃｏｎｓｉｄｅｒａｂｌｅａｔｔｅｎｔｉｏｎｂｅｃａｕｓｅｏｆｉｔｓｓｃｉｅｎｔｉｆ ｉｃａｎｄｅｎｖｉｒｏｎｍｅｎｔａｌｒｅｌｅｖａｎｃｅ .1 6 Ｔｈｉｓｒｅａｃｔｉｏｎｓｅｅｍｓｔｏｐｌａｙａｎｉｍｐｏｒｔａｎｔｒｏｌｅｉｎｖａｒｉｏｕｓｐｒｏｃｅｓｓｅｓ .Ｂｏｎｄ ｂｒｅａｋ ｉｎｇｒｅａｃｔｉｏｎｉｓａｐｏｗｅｒｆｕｌｓｙｎｔｈｅｔｉｃｔｏｏｌｔｏｐｒｏｖ…     

HY沸石上2,6-二叔丁基萘的择形合成

 研究了脱铝HY沸石（n（Si）／n（Al）＝3．8）上萘（naph）的\r\n选择性叔丁基化反应．结果表明，八面沸石对该反应过程有较好的择形\r\n催化作用，两种异构化产物（2，6－二叔丁基萘和2，7－二叔丁基萘）\r\n之间存在着热力学平衡，即两种异构化产物可在酸性中心位上相互转化\r\n．在以叔丁醇为烷基化试剂，WHSV＝2h－1，n（t－BuOH）／n（naph）\r\n＝3，反应温度为120℃的反应条件下，萘的转化率可达98．43％，β－\r\n位选择性可高达100％，二叔丁基萘收率可达74．34％，2，6－二叔丁\r\n基萘／2，7－二叔丁基萘质量比为6．24．     

Controlled release of acetochlor from poly (butyl methacrylate-diacetone acrylamide) based formulation prepared by nanoemulsion polymerisation method and evaluation of the efficacy

Acetochlor is an important herbicide for gramineous weeds and some small seed broadleaf weeds. Controlled-release formulations of herbicide are highly desirable not only for attaining the most effective utilisation of the weed control, but also for reducing environmental pollution. Acetochlor was incorporated in poly (butyl methacrylate-diacetone acrylamide) based formulation to obtain controlled release properties. The acetochlor nanocapsules were characterised by size distribution, infrared spectroscopy (IR) and field emission scanning electron microscopy (FESEM), and factors related to loading efficiency, swelling behaviour of the formulation were investigated. For this controlled-release formulation, the loading efficiency could reach about 50% (w/w). n, the diffusion parameter was indicative of the transport mechanism, and the values for ‘n’ were in the range of 0.28–0.61, which indicated that the release of acetochlor was diffusion-controlled. The time taken for 50% of the active ingredient to be released into water, t₅₀, was also calculated for the comparison of formulations in different conditions. The formulation with higher temperature and more diacetone acrylamide had lower value of t₅₀, which means a quicker release of the active ingredient. This study highlighted some pieces of evidence that improved herbicide incorporation and slower release were linked to potential interactions between the herbicide and the polymer.     

环戊二烯掺杂乙烷桥联有序介孔材料的制备、表征及应用

 以单硅酯 (2-(环戊基-1,3-二烯基) 乙基) 三乙氧基硅烷 (TEECp) 和含有亚乙基桥键的硅酯 1,2-二 (三乙氧基硅基) 乙烷为硅源, 以三嵌段共聚物 P123 为模板剂, 通过调节 TEECp 预水解时间, 采用共聚法合成了环戊二烯掺杂乙烷桥联材料 (Cp-PMO), 并采用小角 X 射线衍射、N2 物理吸附、透射电镜、红外光谱和热重等技术对样品进行了表征. 结果表明, 环戊二烯基被成功引入到乙烷桥联材料中, 所得 Cp-PMO 样品具有高度有序的二维六方介孔孔道, 热稳定性较高; 随着材料中环戊二烯含量的增加, 其有序性降低, 孔径、比表面积和孔体积均有所减小, 孔壁逐渐增厚. 在乙酸乙酯与正丁醇的酯交换反应中, Cp-PMO 样品表现出较高的催化活性. 当该样品中环戊二烯含量为 30% 时, 乙酸乙酯转化率和乙酸丁酯收率分别可达 19.3% 和 10.6%.     

Novel organotin‐containing shell‐cross‐linked knedel and core‐cross‐linked knedel: Synthesis and application in catalysis

A series of novel organotin‐containing core‐cross‐linked knedels and shell‐cross‐linked knedels were first synthesized facilely from poly(styrene)‐b‐poly(acrylate acid) nanoparticles in different selective solvents [Tetrahydrofuran (THF)/H₂O or THF/n‐octane] by using organotin compound 1,3‐dichloro‐tetra‐n‐butyl‐distannoxane as a new cross‐linker. The formation of the 1‐chloro‐3‐carboxylato‐tetra‐n‐butyl‐distannoxane layer in our cross‐linking reaction was supported by Fourier transform infrared (FT‐IR) and inductive coupled plasma emission spectrometer (ICP) analysis of the resulting shell‐cross‐linked knedels and core‐cross‐linked knedels. Transmission electron microscopy (TEM) study showed the spherical morphology and the size of the core‐cross‐linked knedels and shell‐cross‐linked knedel. Especially, the layer structure of the core‐cross‐linked knedels was clearly displayed in TEM image. The increase of extent of cross‐linking lead to the increasing of diameter for the shell‐cross‐linked knedels, whereas there was no significant effect on the core‐cross‐linked knedels. Dynamic light scattering (DLS) measurements gave hydrodynamic diameters of the core‐cross‐linked knedels that were in agreement with the TEM diameters. Moreover, the wall thickness of the shell layer of the core‐cross‐linked knedels could be easily modified by varying the block copolymer composition. Notably, the organotin‐containing core‐cross‐linked knedel exhibited highly efficient catalytic activity for the aqueous esterification reaction under nearly neutral conditions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

L-AlaC4NTf2手性离子液体作为新型气相色谱固定相的性能研究

合成了一种手性离子液体L-丙氨酸叔丁酯双三氟甲烷磺酰亚胺(L-AlaC4NTf2), 将其作为新型气相色谱固定相, 并与OV-1701按不同比例混合, 考察了它们的色谱性能. 研究结果表明, 该离子液体作为手性固定相的热稳定性高于175 ℃; 平均McReynolds常数为665; 在容量因子为1.02时, 理论塔板数可达每米1095块; 其对烷烃、醇类、酮类、芳香族化合物、位置异构体以及一些手性化合物具有良好的分离效果.