EFFECT OF MOLECULAR WEIGHT OF PDMS ON MORPHOLOGY AND MECHANICAL PROPERTIES OF PP/PDMS BLENDS

 A series of polydimethylsiloxane (PDMS) with varied molecular weights (Mw = 3  106, 1  106 and 0.5  106) were melt blended with PP to investigate the effect of PDMS molecular weight (MW) on the morphology and mechanical properties of PP/PDMS blends. Scanning electron microscopic (SEM) examination showed that the size of PDMS domains was dependent on the MW of PDMS. It was found that the lower the value of PDMS MW, the better dispersion of the PDMS domains in the PP matrix. Tensile and Izod impact tests revealed that the addition of PDMS with lower MW would lead to a more significant increase in impact strength of the blends compared with the blends with higher MW ones, while the influence of the molecular weight on tensile strengths of the blends was relatively small in the MW range studied. Differential scanning calorimetry (DSC) results also showed that the crystallization temperature of PP was increased with decreasing PDMS MW, indicating a better nucleation capability of lower MW of PDMS. Melting flow rate (MFR) measurements indicated that the processibility of PP could be enhanced by adding PDMS, and again the lower MW PDMS resulted in better data. Our work demonstrates that not only the processibility but also the mechanical properties of PP could be enhanced to a more significant degree by using low MW PDMS than the higher ones.     

分子量对聚丙烯等温结晶的影响

<正> 在高聚物结晶动力学的研究中,分子量对结晶速率的影响是一个有实际意义和理论兴趣的研究课题,由于聚烯烃可以得到分子量变化范围相当宽(MW从10~3到10~6)的试样,因而它是研究结晶速率分子量依赖性较合适的对象,其中研究最多的是聚乙烯和聚丙烯。从前入的研究报道看来,影响聚丙烯结晶速率的因素比聚乙烯要复杂。除了聚丙烯可生成多种晶型结构,会影响其结晶速率以外,用不同聚合方法制备的试样,由于其链结     

聚合条件对N-羧基-L-丙氨酸-环内酸酐开环聚合产物分子量的影响

用光气法制备了N-羧基-L-丙氨酸-环内酸酐(L-Alanine NCA).系统研究了L-Alanine NCA开环聚合反应过程中引发剂、溶剂、温度对聚合物分子量的影响.用硝基苯作溶剂,三乙胺作引发剂,所得聚合物特性粘度[η]=1.18.实验中发现,L-Alanine NCA可以顺利地进行热聚合反应。反应具有速率快,转化率高,分子量大的特点。甲苯溶剂中反应5小时所得聚合物[η]=2.35,高于采用引发剂的聚合体系产物的相应值。     

First synthesis of an α-d-Fucp3NAc containing oligosaccharide: a study on d-Fucp3NAc glycosylation

3-Acetamido-3,6-dideoxy-d-galactopyranose (d-Fucp3NAc) is an aminosugar almost exclusively found in phytopathogenic O-antigens. The glycosylation reaction involving d-Fucp3NAc donors was studied with several rhamnosyl acceptors, revealing that the best yields and highest α-stereoselectivity were obtainable by coupling a N-phenyl trifluoroacetimidate glycosyl donor in a ternary mixture (dioxane/DME/toluene 4:1:1) as solvent. For the first time a synthetic access to α-d-Fucp3NAc containing oligorhamnans, that are interesting molecules for studying the effects of O-antigen model oligosaccharides on the modulation of plant response to bacteria, was reported. An example is the pentasaccharide repeating unit of the major O-antigen component from Pseudomonas syringae pv. holci IMV 8300, which was synthesized as its methyl glycoside.     

STUDY ON 1-HEXENE POLYMERIZATION BASED ON ZIEGLER-NATTA CATALYSTS WITH DOPED SUPPORT

A series of Ti/Mg supported catalysts are prepared by using ball-milled mixtures of MgCl2-ethanol adducts and NaCl as supports, and 1-hexene polymerizations catalyzed by the novel catalysts are studied. It is found that the molecular weight distribution of poly(1-hexene) becomes apparently narrower when catalysts with doped supports are used, indicating that changing the structure of the support is an effective way to regulate the active center distribution of heterogeneous Ziegler-Natta catalyst.     

Determining the chromophore in the amylopectin–iodine complex by theoretical and experimental studies

A partial hydrolysis of amylose followed by the addition of iodine provides a spectrum almost identical to that of the amylopectin–iodine (API) complex suggesting the involvement of smaller “amylose-like” units in the API complex. Our theoretical studies on different polyiodine and polyiodide species suggest that a nearly linear I₄ unit stabilized within the cavity of a small “amylose-like” helix is responsible for the characteristic API spectrum. Since there are 2.75 anhydroglucose residues (AGU) for every iodine atom in the amylose–iodine (AI) complex and a structural similarity exists between the API and the AI (amylose–iodine) complexes, we identify (C₆H₁₀O₅)₁₁I₄ to be the chromophore in the API complex. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterisation of advanced UHMWPE/silver nanocomposites for biomedical applications

A supercritical fluid (SCF) route for facile and homogeneous introduction of silver nanoparticles into polymer hosts is described. Our focus is on ultra-high molecular weight polyethylene (UHMWPE). We demonstrate that the metallic nanoparticles have a substantial effect upon the wear and tribochemical properties of the polymer substrate.     

Cationic polymerization of hydrocarbon monomers induced by complexes of acyl halides with Lewis acids 5. Polymerization of isobutylene in the presence of the complexes of benzoyl chloride with aluminum bromide

Polymerization of isobutylene inn-hexane at -78 °C in the presence of the complex of benzoyl chloride with AIBr₃ (1 : 2) was investigated. The results were compared to those obtained previously for the polymerization of this monomer induced by the complex of acetyl bromide with AlBr₃. Both complexes initiate the polymerization only by acyl cations. The number average molecular weight (M _n ) of the polymer linearly increases as the degree of isobutylene conversion increases. The polymerization restarts after repeated addition of the monomer, andM _n continues to increase linearly. The efficiency of the initiaton by the benzoyl chloride complex does not exceed 6.2 %; the reaction has the second order with respect to the initiator in the case of PhCOCI · A1₂Br₆; and the chain-propagation rate constant is 13.9 L mol^–1 s t. The use of PhCOCI Al₂Br₆ as the initator of the polymerization of isobutylene allows one to prepare macromolecules with very low contents of the terminal C=C double bonds and with narrow molecular weight distributions. Unlike the MeCOBr·AlBr₃ complex, PhCOCl · AlBr₃ does not initiate polymerization of isobutylene.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1175–1179, May, 1996.     

Contravariant forms and extremal projectors

Tensor product of irreducible modules of highest weight over a semi-simple quantum group is completely reducible if and only if a natural contravariant form is non-degenerate when restricted to the span of singular vectors. We express this restriction through the extremal projector of the quantum group providing a computationally feasible criterion for complete reducibility of tensor products.     

一般工商业零售电价套餐适应性评估与优化方法

在电力体制改革的大背景下,合理评估零售电价套餐适应性,对控制电网经营风险和推进售电侧改革有重要意义。针对我国电力市场以及一般工商业的特点,首先从竞争、用户以及市场环境角度出发建立了一般工商业零售电价套餐评估指标体系;其次将层次分析法和改进的灰色白化权函数相结合,对电价套餐进行适应性评估;最后针对该评估方法建立了基于蚁群算法的优化模型,以最小成本得到提高电价套餐适应性等级的优化方案,并验证了该方法具有良好的鲁棒性,具有一定的参考意义。