Applicability of normal and shear stress cells embedded in cohesionless materials

A normal stress cell and a shear stress cell have been designed and tested under very varied conditions including permanent strain. Results pooled from nine different tests with the cells embedded in cohesionless materials (sand and wheat) showed that the coefficient of variation of the normal stress-cell sensitivity was 0.04, while it was 0.10 for the shear cell. The agreement between predicted and measured sensitivity was considered to be good for the normal stress cell and reasonably good for the shear stress cell. The shear cell showed a systematic dependence, within acceptable limits, of the total stress state in the surrounding material. A qualitative explanation of this phenomenon is given. Paper was presented at the SEM VI International Congress on Experimental Mechanics held in Portland, OR in June 6–10, 1988.     

碳纤维增强摩阻材料的摩擦磨损特性研究

利用Ｄ－ＭＳ摩擦磨损试验机研究了自制的碳纤维增强摩阻材料的碳纤维含量、表面状态、强度及长度对其摩擦磨损性能的影响．结果表明：碳纤维含量对摩阻材料的摩擦磨损性能有显著影响,低含量时主要起减摩作用,高含量时主要起抗犁削作用;经过表面改性的碳纤维与粘结剂结合强度较高,能改善摩阻材料的摩擦磨损性能,高强度碳纤维增强摩阻材料具有较好的摩擦磨损性能;碳纤维长度对摩阻材料的摩擦磨损性能和加工性能具有一定的影响．     

空间电动力绳系统理论及实验研究

本文关注在轨航天器中具有导电性能的电动力绳系统,因其复杂动响应特征及潜在应用前景值得学者们深入研究。论文阐述了电动力绳系统的工作原理,对系统的力学建模、动力学行为、控制、应用、在轨实验及地面实验方法等研究进展进行了详细总结,同时提出电动力绳系统有待进一步探究的科学与技术问题。     

A STUDY ON THE COUNTER-INTUITIVE BEHAVIORS OF PIN-ENDED BEAMS UNDER PROJECTILE IMPACT

The counter-intuitive behaviors of pin-ended beams under the projectile impact are investigated with ANSYS/LS-DYNA in this paper. It studies in detail their displacement-time history curves, final deformed shapes, energy relationships and projectile impact velocity ranges related to their counter-intuitive behaviors. The influences of the impact positions on their counterintuitive behaviors are also discussed. The results show that no matter where the impact position on the beam is, the counter-intuitive behaviors of pinned beams will occur as long as the impacting velocity lies within a proper range. Corresponding to the occurring of the counter-intuitive behaviors, the rebounding number in the displacement history curves of the beams decreases from a few times to zero with an increase of the impact velocity. The final deformation modes of the beam corresponding to the counter-intuitive behaviors will appear in symmetrical and unsym-metrical forms no matter where the impact position is; the impact velocity of the first-occurring of the counter-intuitive behaviors of the beam increases slowly with the deviation of the impact position away from the mid-span.     

Spatiotemporal breather in diffraction decreasing media

The similarity transformation between the (3+1$3+1$)-dimensional nonlinear Schrödinger equation with different distributed transverse diffraction and the standard nonlinear Schrödinger equation is found, and a spatiotemporal breather solution is given based on this transformation. The control for the evolutional behaviors of a spatiotemporal breather is discussed. Our results manifest that the relation between the maximum accumulated time _Tm$T_m$ and the accumulated time, _T0$T_0$, with the maximum amplitude, is the basis to realize the control and manipulation of propagation behaviors of breathers, such as fast and slow excitations, sustainment and restraint. These results are potentially useful for future experiments in the optical communications and Bose–Einstein condensations.     

船用945钢动态断裂行为的温度效应

借助于示波冲击实验,采用预裂纹的Charpy冲击试样,对船用945钢在不同温度下的动态断裂行为进行了研究,得到了945钢的动态断裂韧性随温度的变化规律,并对不同温度下的示波冲击曲线特征和动态断裂的微观特征进行了分析。     

APPLICATION OF THE MODIFIED METHOD OF MULTIPLE SCALES TO THE BENDING PROBLEMS FOR CIRCULAR THIN PLATE AT VERY LARGE DEFLECTION AND THE ASYMPTOTICS OF SOLUTIONS(Ⅱ)

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎ［１］，ｔｈｅｓｅｒｉｅｓｓｏｌｕｔｉｏｎｓｏｆｔｈｅｃｉｒｃｕｌａｒｐｌａｔｅｗｉｔｈｈｉｎｇｅｄｅｄｇｅａｎｄｗｉｔｈｔｈｅｓｉｍｐｌｙｓｕｐｐｏｒｔｅｄｅｄｇｅｈａｓｙｅｔｂｅｎｃｏｎｓｔｒｕｃｔｅｄ，ｗｈｉｃｈａ...     

Controllability properties of nonlinear behaviors

This paper proposes a topological framework for the analysis of the time shift on behaviors. It is shown that controllability is not a property of the time shift, while chain controllability is. This also leads to a global decomposition of behaviors.

     

On the use of nickel foil strain gages at varying temperatures

When a strain gage made of nickel foil attached on the surface of a specimen is subjected to repeated loads, the elastic stress is measured by observing slip-bands in the foil resulting from repeated strain. Calibration studies with rotating-bending tests at various temperatures between room temperature and 350°C are performed on round steel bars with nickel foil. The relation between the threshold stress for the first appearance of slip-bands and the number of stress cycles is examined at varying temperatures, which provides the calibration values of the nickel foil tested at varying temperatures. Assuming that the first appearance of slip-bands is based on the linear cumulative damage law, the calibration values at varying temperatures are calculated from those established by the calibration tests at several constant temperatures. It is found that the calculated calibration values agree well with the results obtained by the calibration tests at varying temperatures and that the calculation applying the linear cumulative damage law is a useful method to presume the calibration values at varying temperatures without performing the experiment.     

东鞍山贫铁矿石磁选预富集行为

针对东鞍山贫铁矿石(Fe质量分数34.60%)中含有赤铁矿、磁铁矿和少量的菱铁矿,提出了一种弱磁粗选-高梯度扫选的预富集工艺,并借助XRD、铁的化学物相分析及扫描电镜(SEM)考察了磁场强度和原料磨矿细度对东鞍山铁矿石预富集行为的影响.结果表明,在磨矿细度-0.074mm占70%(质量分数)、弱磁粗选磁场强度120mT、高梯度扫选Ⅰ磁场强度300mT及高梯度扫选Ⅱ磁场强度800mT的条件下,可获得Fe质量分数42.67%、回收率95.45%的预富集精矿;磁铁矿富集于弱磁粗选作业中,赤铁矿和菱铁矿在高梯度扫选作业中得到有效富集,尾矿中丢失的铁矿物主要为微细粒赤铁矿(＜10μm),由于受到的磁性捕获力弱而无法得到回收.