Synthesis,characterization, and tribological properties of two‐dimensional Ti3C2

We report on the preparation of two‐dimensional (2D) Ti₃C₂ and its friction and wear properties. Laminated Ti₃AlC₂ was synthesized by pressureless sintering using Ti, Al, and graphite, followed by HF exfoliation and sonication treatment to form 2D‐layered Ti₃C₂, which exhibited individual layer or stack of several layers. Analysis of microstructure and composition was used to confirm the successful exfoliation of laminated Ti₃AlC₂. The tribological behaviors of the as‐prepared 2D Ti₃C₂ as a lubrication additive in base oil were investigated. Results indicate that 2D‐layered Ti₃C₂ can greatly enhance the friction‐reducing and anti‐friction properties of base oil, especially with 1.0 wt% Ti₃C₂. This novel 2D‐layered Ti₃C₂ would be a good candidate for lubricating materials to meet emerging needs in practical applications.     

The selective and enhanced adsorptive behaviors of supramolecular recrystallized 1,3,5-benzenetricarboxylic acid assembled nano-bacterial cellulose

The effluent discharge produced in the textile printing and dyeing, leather and other fields, will cause the irreversible environmental pollution and extremely threatening safety of living organisms. The appropriate and efficient disposal method of dyestuff originated wastewater has been widely concerned in the past decades. In this study, the recrystallization of 1,3,5-benzene tricarboxylic acid (RCTMA) was put forward via a hydrothermal method to form the supramolecular RCTMA-based hexamer and thereafter assembled into the porous nano-bacterial cellulose (NBC) to construct the RCTMA@NBC composite. The morphology and surface properties of RCTMA@NBC were examined by scanning electron microscope, X-ray diffraction, and Fourier transform infrared spectroscopy. This RCTMA@NBC was employed to adsorb methylene blue (MB) adjusting the pH, temperature, and dosage of adsorbent. The result showed the maximal absorption capacity of RCTMA@NBC appeared under pH = 7.1 and higher temperature will hinder the adsorption of dyes. Moreover, the adsorption isotherms and kinetics were evaluated which was more confirmed to Langmuir model and quasi-second-order kinetic equation, and the simulated maximum adsorption capacities of MB was 1162.12 mg/g. Moreover, cationic golden XGL and anionic brilliant crocein were selected to further verify the distinct adsorptive behavior. The excellent affinity towards cationic dyes proved the easy combination was based on the chemical force originated from mutual attraction between opposite charges, π–π interactions, and H-bonding, whereas the poor attraction for brilliant crocein was due to the electrostatic repulsion between sulfonic and carboxyl groups. The synthesized RCTMA@NBC possesses higher efficiency and selective adsorption, which exhibits the promising potential in the field of precise treatment of organic dye wastewater.     

不同封装材料的中功率GaN基LED器件老化分析

针对中功率蓝光及相应的白光LED器件进行加速老化实验,并具体分析了器件中硅胶和绿红混合荧光粉等封装材料对老化行为的影响和失效机理。在测试器件的光电老化行为之后,利用反射光谱和飞行时间二次离子质谱对失效器件进行了结构分析。结果表明,温度和湿度对蓝光和白光器件老化行为具有不同的影响。对于中功率蓝光LED而言,其光衰的主要原因是由于S、Cl等元素的引入及氧化等因素引起的黄化导致了透明硅胶反射率的下降。而对于绿红混合荧光粉组成的中功率白光LED来说,其光衰和色漂问题主要归结于在高温特别是高湿环境下工作,器件中荧光粉和硅胶等封装材料发生了一些化学反应,使荧光粉发生分解,并引起了荧光转换效率的下降。     

Co γ-ray irradiation effect and degradation behaviors of a carbon nanotube and poly(ethylene-co-vinyl acetate) nanocomposites

This paper describes the process of manufacturing a new nanocomposite material, which involves adding a carbon nanotube (CNT) to improve EVA's physical characteristics such as weak radiation resistance and thermal properties. We irradiated the prepared samples with doses of 50 kGy, 100 kGy and 200 kGy at a dose rate of 5 kGy/h and examined their thermogravimetric characteristics, activation energy, degradation progress, and CNT dispersion using a thermogravimetric analyzer (TGA), chemiluminescence (CL), and a field emission scanning electron microscope (FESEM). Experimental results indicated that the samples with a CNT had higher DTG 2nd peak temperatures than those without a CNT. Activation energy of the samples reduced as the irradiation dose and the CNT content increased. In the second CL experiment, the CL intensity rapidly declined as the temperature, irradiation dose and the CNT content increased. Finally, examination of the fracture surfaces in the FESEM experiment indicated that the lamella structure of the EVA changed as the irradiation dose increased. We were also able to observe that samples with a CNT were aggregated and dispersed in numerous lumps.     

Thermal behaviors of petn base polymer bonded explosives

The thermal behaviors of three pentaerythritol tetranitrate (PETN) base polymer bonded explosives (PBX), Detasheet A (EL506A, red) and Datasheet C (EL506C, yellow-green) that supply by DuPont Co., PBXN-301 were investigated using thermal techniques in this work. The thermal properties of PETN base polymer bonded explosives, such as vacuum thermal stability (VTS), time to ignition, auto-ignition and shelf life of PBX that calculation from Arrhenius equation by the length of time for 5% decomposition were also examined. By comparing the thermal properties, VTS and shelf life of PETN base polymer bonded explosives, the application and storage of Datasheet C (EL506C, yellow-green) should be considered carefully, owing to the ingredients of Datasheet C (EL506 C, yellow-green) containing nitrocellulose. Binders that using in this study seems play no significant effect on the decomposition for polymer bonded explosives, because the decomposition temperature of binders is always higher than that of PETN.     

百度百科大众生产者的激励研究

大众生产是一种新型的知识生产模式和商业模式,其参与者通常在没有物质报酬的情况下通过互联网进行合作,因此对大众生产者进行激励十分必要和重要。以经典的大众生产实例百度百科为对象,探究大众生产者的激励问题。首先通过实证研究探寻绩效和参与行为的影响因素,得到如下发现:绩效受到胜任动机和参与行为的显著正向影响;参与行为受到实用价值动机、乐趣动机和胜任动机的驱动。据此提出相应的激励措施:关注大众生产者的行为类型及其动态变化,给予相应的激励;重视积分奖励的实施;推进任务的模块化;通过丰富词条内容、确保词条的准确性,满足大众生产者的需求特别是乐趣需求与求知需求;改进界面友好性,特别是在线交流软件的易用性。     

大数据时代的信息用户行为分析

大数据时代的数据分析影响着我们的生活和学习,也影响着图书馆的发展。阐述了大数据及用户行为研究现状,分析了大数据时代的用户行为,指出大数据时代的用户行为分析从取样到数据接受和数据分析都发生了根本的变化,同时指出了用户行为分析中存在的不足。     

三价砷存在条件下毒砂表面微结构对热氧化硫杆菌附着性的影响

Understanding bacterial adsorption and the evolution of biofilms on arsenopyrite with different surface structures is of great significance to clarifying the mechanism of microbe–mineral interfacial interactions and the production of acidic mine drainage impacting the environment. In this study, the attachment of Sulfobacillus thermosulfidooxidans cells and subsequent biofilm formation on arsenopyrite with different surface structures in the presence of dissolved As(Ⅲ) was studied. Arsenopyrite slices with a specific surface were obtained by electrochemical corrosion at 0.26 V. The scanning electronic microscopy-energy dispersion spectra analyses indicated that the arsenopyrite surface deficient in sulfur and iron obtained by electrochemical treatment was not favorable for the initial adsorption of bacteria, and the addition of As(Ⅲ) inhibited the adsorption of microbial cells. Epifluorescence microscopy showed that the number of cells attaching to the arsenopyrite surface increased with time; however, biofilm formation was delayed significantly when As(Ⅲ) was added.     

Enantioselective Recognition of Dopa Enantiomers in the Presence of Ascorbic Acid or Tyrosine

A simple sensor was obtained through N‐isobutyryl‐L ‐(D )‐cysteine enantiomers self‐assembled monolayer. It was demonstrated that the N‐isobutyryl‐cysteine modified gold electrodes can enantioselectively recognize 3,4‐dihydroxyphenylalanine (dopa) enantiomers. The electrocatalytic behaviors of enantiomers were analyzed with cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Selectivity of the chiral surface was estimated by investigating two mixture enantiomers (dopa‐ascorbic acid and dopa‐tyrosine), it certified that the sensor was only satisfactorily used to specific recognize dopa enantiomers. The possible mechanism for the enantioselective recognition was discussed.     

Release behaviors of porous poly(butylene succinate)/poly(epsilon-caprolactone) microcapsules containing indomethacin

The biodegradable poly(butylene succinate)/poly(epsilon-caprolactone) (PBS/PCL) microcapsules containing indomethacin were prepared by emulsion solvent evaporation method. The morphologies, thermal properties, and release behaviors of PBS/PCL microcapsules were investigated. As a result, the microcapsules exhibited porous and spherical form in the presence of gelatin as a surfactant. From the DSC result, the PBS/PCL microcapsules showed the two exothermic peaks meaning the melting points of PCL and PBS. The results of FT-IR and DSC proved that the PBS and PCL were mixed so that the PBS/PCL microcapsules were composed of two wall-forming materials. And the release rate of indomethacin from the microcapsules was decreased with increasing the PCL content. It was noted that an addition of PCL on the PBS led to the decrease of pore size in the PBS/PCL microcapsules.