扭角羚的舔盐行为观察及初析

通过观察发现,扭角羚舔盐行为,在唐家河是每年8—10月的每天傍晚19:00—20:00至次日06:30—08:30。其舔盐行为一是类似觅食,再是类似饮水。这些行为我们认为可能与繁殖交配、受孕期生理所需的特殊矿物质营养或帮助解除某些植物的毒性有关。     

双螺杆冻胶纺丝法制备有机液体吸附功能纤维及其性能研究

在聚合釜中合成了BMA/HEMA二元共聚树脂,利用双螺杆纺丝机、采用冻胶纺丝技术制备了有机液体吸附功能纤维,研究了单体投料比中HEMA质量分数对纤维各种溶胀行为的影响,利用动态热机械分析仪(DMA)对纤维的动态力学性能进行了研究,同时利用环境扫描电子显微镜(SEM)观察了纤维的表面和断面形貌.结果表明,HEMA引入大分子后,所得纤维对有机液体甲苯、三氯乙烯具有吸附功能,且吸附过程符合sigmoidal模型中的Hill方程;随HEMA质量分数的增加,纤维对甲苯和三氯乙烯的饱和吸附量增大,对甲苯和三氯乙烯的最大吸附量分别可达10g/g和21g/g;随HEMA质量分数的增加,纤维剩余率增加的同时,使纤维对甲苯和三氯乙烯的握持能力增强;HEMA质量分数对纤维动态力学性能有突出影响,特别是链段运动受其影响更为明显;HEMA质量分数对纤维表面和断面形貌均有显著影响,特别是当HEMA质量分数为15wt%时,所得纤维表面出现了许多空洞,其断面存在许多尺寸不均的空洞.     

Preparation and Tribological Behaviors of Lubricants—Oil Based on Modified Microbial Oil with Nano-Schiff Base Copper Complex

A W/O microemulsion reactor was used to prepare four kinds of modified lubricants: (i) modified lubricant 1, modified epoxidized microbial oil + rape oil in volume ratio of 1:1; (ii) modified lubricant 2, modified esterified microbial oil + rape oil in volume ratio of 1:3; (iii) modified lubricant 3, modified epoxidized rape oil; and (iv) modified lubricant 4, modified PAO. The individual modified lubricants were further modified with 0%, 0.5%, 1%, and 2% content of nano-Schiff base copper complex (nano-SBCC). A microtribometer was used to evaluate the friction coefficient between ball/flat point contacts immersed in the modified lubricants and operated in reciprocating and linear sliding mode. A comparison of the values of the friction coefficient with the lubricants further modified with nano-SBCC with those of their individual 0% nano-SBCC counterparts indicated significant decrease: (i) almost 19.18% was obtainable for the modified lubricant 1 with 2% of nano-Schiff base copper complex, (ii) almost 16.5% was obtainable for the modified lubricant 2 with 0.5% of nano-Schiff base copper complex; (iii) almost 7.42% was obtainable for the modified lubricant 3 with 1% of nano-SBCC; and (iv) almost 7.01% was obtainable for the modified lubricant 4 with 0.5% of nano-SBCC. These suggested that the addition of nano-Schiff base copper complex can efficiently decrease the friction coefficient of epoxidized or esterified microbial oil. Analyses of two-dimensional images, average profiles (across the mid-section y = 0 of the reciprocating sliding path), and three-dimensional topographies by confocal white light microscope for the worn surfaces of flats immersed in modified lubricant 1 and modified lubricant 2 suggested better wear-resistance of the modified lubricant 2 than that of the modified lubricant 1. The ability of wear resistance for the modified lubricant became better with the increasing content of nano-Schiff base copper complex from 0% to 2%. The study revealed the modification of epoxidized microbial oil + rape oil (1:1 volume ratio) and esterified microbial oil + rape oil (1:3 volume ratio) with Cu(II) chelate of bis(salicylaldehyde)ethylenediamine, reducing the magnitude of friction and wear because of their respective wear self-repairing ability. Such self-repairing ability furnishes the suitability of epoxidized microbial oil or esterified microbial oil to be effectively modified by nano-Schiff base copper complex and to substitute ordinary base oil as a mixture with rape oil.     

A vectorial algorithm with finite element method for prediction of powder segregation in metal injection molding

The design of the mold and the choice of the injection parameters for metal injection molding (MIM) is required to maintain homogeneity of the filled mixture. However, powder segregation is unavoidable in MIM because of the significant difference in densities of the metallic powder and the polymer binder. To achieve an effective prediction of segregation effect, a biphasic model based on mixture theory is employed. The viscous behaviors of each phase and the interaction coefficient between the flows of the two phases should be determined. The solution of two coupled Navier–Stokes equations results in a tremendous computation effort. The previous development of an explicit algorithm makes the biphasic simulation much faster than that of the classic methods. However, it is strongly desired to reduce or even eliminate the numerous global solutions for pressure fields at each time step. Hence, a new vectorial algorithm is proposed and developed to perform the simulation only by vectorial operations. It provides the anticipated efficiency in the simulation of biphasic modeling, and the advantage to use the classic elements of equal‐order interpolations. Some results produced by the two algorithms are compared with the experimental values to validate the new vectorial algorithm. Copyright © 2012 John Wiley & Sons, Ltd.     

Microbial Screening of Copolymers of N‐Vinylimidazole with Phenacyl Methacrylate: Synthesis and Monomer Reactivity Ratios

N‐vinylimidazole (VIM), and phenacyl methacrylate (PAMA) copolymerized with different feed ratios using 1,4‐dioxane as a solvent and α,α'‐azobisisobutyronitrile (AIBN) as an initiator at 60°C. Structure and composition of copolymers for a wide range of monomer feed were determined by elemental analysis (content of N for VIM‐units) and by Fourier transform infrared spectroscopy through recorded analytical absorption bands for VIM (670 cm^?1 for C‐N of imidazole ring) and PAMA (1730 cm^?1 for C?O of ester group) units, respectively. Monomer reactivity ratios for VIM (M₁)‐PAMA (M₂) pair were determined by the application of conventional linearization methods such as Fineman‐Ross (F‐R) and Kelen‐Tüdös (KT) and a nonlinear error invariable model method using a computer program RREVM. The molecular weights (_w and _n) and polydispersity indices of the polymers were determined using gel permeation chromatography (GPC). Thermal behaviors of copolymers with various compositions were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Also, the apparent thermal decomposition activation energies (ΔE_d) were calculated by Ozawa method using the SETARAM Labsys TGA thermobalance. The antibacterial and antifungal effects of polymers were also tested on various bacteria, fungi and yeast.     

Physicochemical Studies on an All-Purpose Pesticide Spray Adjuvant-(APSA-80)

APSA-80, an useful pesticide spray adjuvant is a mixture of 2-[2-(4-nonylphenoxy) ethoxy] ethanol, 1-butanol and tall oil fatty acids. It is strongly surface active and can decrease the surface tension of water to ～20 mNm^?1 at its critical micelle concentration (CMC) of 0.006 g%. APSA-80 itself and its binary mixtures, (APSA-80 + water) and (APSA-80 + isopropylmyristate [IPM]) and ternary mixtures (APSA-80 + water +IPM) can undergo a number of physical changes with rise in temperature; the main changes are in color, turbidity and phases. The ternary mixtures of APSA-80/water/IPM with changing compositions can form mono-, bi-, and triphasic solutions as well as gels and viscous solutions. The gel and viscous phases show characteristic rheological properties of both shear thinning and thickening types. They also show permeation of hydrophilic and oleophilic dyes through them. SEM and optical microscopic measurements have shown interesting surface morphologies of the gels and their vertical projections in three-dimensional pictorial mode. Salts like LiCl, NaCl, KCl, CsCl, MgSO₄, and Al₂(SO₄)₃ can have both minor and major effects on the gel consistencies. The alkanols like ethanol, propanol, and isopropanol are also mild to fairly large gel influencing co solvents. The antibacterial properties of APSA-80 have been studied with two Gram positive bacteria and a yeast; the activities found were moderate.     

爆轰波对碰驱动平面锡飞层的动力学及动载行为特征研究

强冲击下的物质变形、破坏及诱发的轻重介质混合问题,是内爆压缩科学和工程应用领域的研究重点.本文针对爆轰波对碰条件下的复杂加载动力学过程及其动载破坏形态特征,开展数值模拟研究与极曲线理论分析.设计了爆轰波对碰驱动平面锡飞层的计算模型,获得了爆轰加载动力学过程及波系相互作用物理图像,分析了锡飞层对碰区自由表面速度历史的典型特征.给出了锡飞层中折射激波对碰发生马赫反射的临界条件,解读了三波结构的传播行为,阐明了对碰区内存在"一维正冲击"区域,一维区外存在单次斜冲击向两次斜冲击过渡的复杂加载动力学过程,提出了对碰区冲击动力学模型,揭示了影响对碰区动载行为特征的机理.数值模拟结果与极曲线理论分析结果相互印证,符合较好.本文的研究成果,将为深入理解和解读对碰区特殊的物质破坏及混合现象提供重要的理论支撑.     

高强超高延性混凝土梁弯剪性能理论分析与数值模拟

开展了14根高强超高延性混凝土（high-strength engineered cementitious composite,HS-ECC）梁的四点弯曲试验,研究了混凝土类型、纵筋配筋率和是否配置箍筋三因素对配筋梁弯剪性能的影响。基于平截面假定和材料本构关系,计算了配筋HS-ECC梁的受弯承载力。基于国内外规范,计算了无腹筋HS-ECC梁的受剪承载力。最后,采用Abaqus软件建立了HS-ECC梁的有限元模型。结果表明：有腹筋梁均为受弯破坏,随着纵筋配筋率增大,试件极限荷载和刚度逐渐增大,而延性未显著降低,配筋HS-ECC梁较普通混凝土梁具有更优异的裂缝分散能力和抗弯性能;无腹筋HS-ECC梁的破坏模式随配筋率增大由受弯破坏转变为受剪破坏,梁受剪承载力和刚度增大,但延性逐渐降低;配筋HS-ECC梁受弯承载力的计算结果与试验值吻合较好;HSECC梁有限元模型可有效模拟试件的荷载-位移曲线。     

Simulation study on cooperation behaviors and crowd dynamics in pedestrian evacuation

Pedestrian evacuation is actually a process of behavioral evolution. Interaction behaviors between pedestrians affect not only the evolution of their cooperation strategy, but also their evacuation paths-scheduling and dynamics features. The existence of interaction behaviors and cooperation evolution is therefore critical for pedestrian evacuation. To address this issue, an extended cellular automaton(CA) evacuation model considering the effects of interaction behaviors and cooperation evolution is proposed here. The influence mechanism of the environment factor and interaction behaviors between neighbors on the decision-making of one pedestrian to path scheduling is focused. Average payoffs interacting with neighbors are used to represent the competitive ability of one pedestrian, aiming to solve the conflicts when more than one pedestrian competes for the same position based on a new method. Influences of interaction behaviors, the panic degree and the conflict cost on the evacuation dynamics and cooperation evolution of pedestrians are discussed. Simulation results of the room evacuation show that the interaction behaviors between pedestrians to a certain extent are beneficial to the evacuation efficiency and the formation of cooperation behaviors as well. The increase of conflict cost prolongs the evacuation time. Panic emotions of pedestrians are bad for cooperation behaviors of the crowd and have complex effects on evacuation time. A new self-organization effect is also presented.