Simulation and Experimental Analysis of Super High-Speed Grinding of Ductile Material

This study aims to reduce the work-affected layer of the machined surface by carrying out the grinding at the speed over static pr o pagation speed of plastic wave of ductile materials and also aims to clarify suc h super high-speed machining mechanism.This paper reports on the result obtain ed through the molecular dynamics simulations and experiments on the super-spee d grinding below and beyond static propagation speed of aluminum.From the simul ation results,it is verified that the plastic deformation ...     

Transesterification of an RNA model in buffer solutions in H2O and D2O

Transesterification of a phosphodiester bond of RNA models has been studied in various buffer solutions, under neutral and slightly alkaline conditions in H₂O and D₂O. The results show that imidazole is the only buffer system where a clear buffer catalysis on the cleavage of a phosphodiester bond is observed. The rate enhancement in sulphonic acid buffers is smaller, and a sulphonate base, particularly, is inactive as a catalyst. The rate‐enhancing effect of imidazole is, however, catalytic, and the catalytic inactivity of sulphonate buffers can be attributed to their structure and/or charge. The catalysis by imidazole is a complex system which, in addition to first‐order reactions, involves a process that shows a second‐order dependence in imidazole concentration. The latter reaction becomes significant in acidic imidazole buffers (pH < pK_a), as the buffer concentration increases. The kinetic solvent deuterium isotope effect k_H/k_D, referring to first‐order catalysis by imidazole base, is 2.3 ± 0.3. That referring to second‐order catalysis is most probably much larger, but an accurate value could not be obtained. Copyright © 2007 John Wiley & Sons, Ltd.     

Time dependent analysis of finite buffer fluid flows and risk models with a dividend barrier

Based on the matrix-analytic approach to fluid flows initiated by Ramaswami, we develop an efficient time dependent analysis for a general Markov modulated fluid flow model with a finite buffer and an arbitrary initial fluid level at time 0. We also apply this to an insurance risk model with a dividend barrier and a general Markovian arrival process of claims with possible dependencies in successive inter-claim intervals and in claim sizes. We demonstrate the implementability and accuracy of our algorithms through a set of numerical examples that could also serve as test cases for comparing other solution approaches.      

Electrochemical Immunoanalysis for Carcinoembryonic Antigen Based on Multilayer Architectures of Gold Nanoparticles and Polycation Biomimetic Interface on Glassy Carbon Electrode

This paper describes a layer‐by‐layer (LBL) self‐assembly process of chitosan (CTS) and gold nanoparticles (Au) on the pretreated negatively charged glassy carbon (GC) electrode to fabricate electrochemistry immunosensor with a nontoxic biomimetic interface, which provided an environment similar to a native system and allowed more freedom in orientation for immobilization of carcinoembryonic antibody (anti‐CEA) to monitor carcinoembryonic antigen (CEA). UV‐vis spectroscope, atomic force microscopy (AFM), and cyclic voltammetric (CV) measurements were used to follow the multilayer film formation. The performance of the biominetic interface and factors influencing the assay system were investigated in detail. The differential pulse voltammetry (DPV) current response is used for the CEA concentration assay. The dynamic range was from 0.50 to 80.00 ng mL^?1 with a detection limit of 0.27 ng mL^?1 at 3σ. In addition, the experiment results indicate that immobilization described in this proposed method exhibits a good sensitivity, selectivity, and stability.     

流动电势用于角加速度传感器的研究

分析和讨论了一种新型角加速度传感器的工作原理与设计方法。该传感器是根据流动电热效应，直接将角加速度信号转换为电信号输出的。和其它形式的角加速度传感器相比，它具有结构简单、成本低、可靠性好、稳定性高等特点。     

无缝线路缓冲区病害分析及根治措施

概述了缓冲区养护中存在的问题,分析了无缝线路缓冲区病害的成因,提出了治理病害的针对性措施.     

地下含水层热储井位置选择和布置

地下含水层热储开发技术面临一系列问题,寻找适合热储用的含水层和合理布置热储井是解决问题的第一步.综合考虑含水层的地质结构特征,适合热储的含水层应该是承压含水层,热储应该采用同层方式.单个热储井的影响半径可以通过热平衡和热扩散原理求得.合理布置热储井间的相对位置,可以有效抵消原有地下水的流动以及渗流系数不一致的影响.利用井之间的渗流耦合作用,在热储井之间布置调节井,主动控制热储水的波及范围,可以实现热储井布置的相对"紧凑".     

镀铜板镀铜量检测分析仪的研制

根据电解剥离原理，采用Cygnal F020单片机为智能部件，研制出的镀铜板镀铜量检测分析仪．本仪器采用微分电位法，使各层界面自动分层难题得到了解决，同时对双电层电容充电电流所引起的测量误差作了修正．该仪器通过USB接口与上位机配合使用，具有小型轻便、操作界面友好和检测数据精确等特点，并具有本机显示和打印测量结果的功能．     

Experience Gained Using Second-Moment Closure Modeling for Transitional Flows Due to Boundary Layer Separation

This paper presents detailed information on the experience gained during the attempts to model a set of transitional flows due to boundary layer separation. These flows are developed on a flat plate with a semi-circular leading edge and they have been coded by the ERCOFTAC Special Interest Group on Transition, as T3L flows. Different freestream velocities and turbulence intensities configure these transitional flows and, by consequence, govern the transition mechanism, resulting in larger or smaller transitional regions. The modeling of the T3L flows has been performed by adopting a low-Reynolds number second-moment closure turbulence model. The results showed satisfactory agreement with the experimental measurements, although some difficulties regarding successful convergence have been faced. The final conclusion is that turbulence modeling can present quite accurate results for transitional flows without any additional use of ad-hoc modifications or additional equations based on various transition models and intermittency transport modeling.     

小窑采空区在地震勘探时间剖面上的解释

从山西晋城小窑采掘现状入手，结合钻探制作煤全采、未采、半采三种模型的合成地震记录换层分析，分析其波形特征，标定了时间剖面上的采空区段与矿方实际采空区基本吻合。