三维战场态势显示标绘技术

 为提高三维战场态势显示标绘的图形效率和人机交互性,在总结分析战场态势信息基本理论概念的基础上,通过对显示与标绘两方面的军事需求和OSG/Qt 结合使用的软件架构模式进行分析,提出了程序框架的线程模式优化方法和基于帧缓存对象的离屏纹理烘焙技术的军标符号显示生成算法.设计和实现了三维战场态势显示标绘软件模块,并对模块进行了多种实现方法的比较测试,检查验证了相关技术方案和关键技术对于提高系统绘制效率和人机交互的有效性.     

SDS在HCV基因工程抗原包被中的应用研究

在间接ELISA法检测HCV抗体过程中,通过使用含有十二烷基硫酸钠（SDS）的包被液对HCV基因工程抗原固相化,发现使用SDS提高了HCV间接ELISA法诊断试剂检测的阳性标本和阴性标本的偏比,改善了反应模式,为改善HCV-ELISA法诊断试剂的质量提供了有效途径.     

OBS突发装配的缓存安全间隔机制

研究了光突发交换边缘路由器上的突发装配,着眼于使其更加通用、合理和高效.为此,引入了单位输入比特率的概念以提高通用性,然后提出和分析了装配中的缓存安全间隔机制及其作用.通过设置适当的缓存安全间隔值,不仅可以避免因缓存溢出引起的分组损失,而且所获得的固定最大发送时间也为突发的信道调度带来了便利.采用边缘路由器上的自相似流量模型,通过网络仿真,讨论了缓存安全间隔取值对突发生成、网络性能及缓存使用的影响,并获得了相关结论.     

膨润土-砂混合物缓冲层径向热传导性

膨润土-砂混合物作为高放废物处置库缓冲材料,在核废料衰变热影响作用下,其稳定性及物理力学性能产生显著变化,这对缓冲回填材料的包封阻隔作用及处置库的安全运行产生重要影响。本研究采用自行设计的装置对按比例缩小后的不同干密度、含水率、掺砂率试样进行热传导模拟试验,并对试验过程进行热-力耦合数值模拟分析,得到了缓冲层温度、应力和应变的变化及分布情况。结果表明,增大试样干密度、含水率和掺砂率均可提高导热性,应力和应变也随之增大,且不同含水率试样产生的结果变化显著;缓冲层靠近热源的位置温度、应力和应变最大,且沿径向方向减小,初始时刻各值变化显著。     

缓冲层生长温度对In0.82Ga0.18As 薄膜结构及电学性能的影响

采用低压金属有机化学气相沉积(LP-MOCVD)技术,两步生长法在InP衬底上制备In_0.82Ga_0.18As材料。研究缓冲层的生长温度对In_0.82Ga_0.18As薄膜的结构及电学性能的影响。固定外延薄膜的生长条件,仅改变缓冲层生长温度(分别为410,430,450,470 ℃),且维持缓冲层其他生长条件不变。用拉曼散射研究样品的结构性能,测量四个样品的拉曼散射光谱,得到样品的GaAs的纵向光学(LO)声子散射峰的非对称比分别为1.53,1.52,1.39和1.76。测量样品的霍耳效应表明,载流子浓度随缓冲层生长温度变化而改变,同时迁移率也随缓冲层生长温度变化而改变。通过实验得出:缓冲层的生长温度能够影响In_0.82Ga_0.18As薄膜的结构及电学性能。最佳的缓冲层生长温度为450 ℃。     

SiC缓冲层对Si表面生长的 ZnO薄膜结构和光电性能的改善

用脉冲激光沉积(PLD)技术制备了ZnO/SiC/Si和 ZnO/Si薄膜并制成了紫外探测器。利用X射线衍射(XRD),光致发光(PL)谱,I-V曲线和光电响应谱对薄膜的结构和光电性能进行了研究。实验结果表明:SiC缓冲层改善了ZnO薄膜的结晶质量和光电性能,其原因可能是SiC作为柔性衬底能够减少ZnO与Si 之间大的晶格失配和热失配导致的界面缺陷和界面态。     

以MgO为缓冲层的硅基铌酸锶钡薄膜取向特性与其波导结构的设计研究

采用溶胶－凝胶法在Si(100)基片上制备出择优取向的MgO薄膜,随后在其上生长出具有择优取向的铌酸锶钡铁电薄膜.实验发现,MgO缓冲层的应用可以大大提高SBN薄膜的择优取向性能.同时,用五层对称理想波导耦合模理论,以SBN为波导层,分析了波导损耗与厚度的关系. 通过对计算出的理想结果与实际相结合,以及对SBN在生长过程工艺与损耗关系的研究,制备出高质量、低损耗的SBN薄膜,为其在电光波导调制器等微系统中的应用打下良好的基础.     

Sensitive DNA biosensor improved by Luteolin copper(II) as indicator based on silver nanoparticles and carbon nanotubes modified electrode

A novel and sensitive electrochemical DNA biosensor has been developed for the detection of DNA hybridization. The biosensor was proposed by using copper(II) complex of Luteolin C₃₀H₁₈CuO₁₂ (CuL₂) as an electroactive indicator based on silver nanoparticles and multi-walled carbon nanotubes (Ag/MWCNTs) modified glassy carbon electrode (GCE). In this method, the 4-aminobenzoic acid (4-ABA) and Ag nanoparticles were covalently grafted on MWCNTs to form Ag/4-ABA/MWCNTs. The proposed method dramatically increased DNA attachment quantity and complementary ssDNA detection sensitivity for its large surface area and good charge-transport characteristics. DNA hybridization detection was performed using CuL₂ as an electroactive indicator. The CuL₂ was synthesized and characterized using elemental analysis (EA) and IR spectroscopy. Cyclic voltammetry (CV) and fluorescence spectroscopy were used to investigate the interaction between CuL₂ and ds-oligonucleotides (dsDNA). It was revealed that CuL₂ presented high electrochemical activity on GCE, and it could be intercalated into the double helices of dsDNA. The target ssDNA of the human hepatitis B virus (HBV) was quantified in a linear range from 3.23 × 10⁻¹² to 5.31 × 10⁻⁹ M (r = 0.9983). A detection limit of 6.46 × 10⁻¹³ M (3σ, n = 11) was achieved.     

反相液相色谱中离子抑制剂的有机调节剂作用

系统地研究了在反相液相色谱（RPLC）流动相中作为离子抑制剂的酸、碱及缓冲溶液对中性化合物保留行为的影响,着重探讨了有机酸、有机碱离子抑制剂的有机调节剂作用,定量地考察了甲醇和乙腈、甲醇和乙酸、甲醇和三乙胺、乙腈和乙酸、乙腈和三乙胺在十八烷基硅烷键合相上洗脱强度之间的关系,为RPLC中有机调节剂的洗脱强度排序提供一种评判方法．另外,讨论了乙酸和三乙胺作为有机调节剂时不同的作用机理．本实验结果对于RPLC分离方法的快速建立和准确优化都具有一定的借鉴意义．     

Effect of Perylene as Electron Acceptor and poly(tetrabromo-p-phenylene Diselenide) as “Buffer Layer” on Heterojunction Solar Cells Performances

Summary : Perylene derivatives, that behave as liquid crystal and might be used as electron acceptors, and poly(tetrabromo-p-phenylenediselenide) (PTBrPDSe) were synthesized with the purpose of using the polymer as buffer layer in solar cells. It was demonstrated that perylene compounds of N,N′-diheptyl-3,4,9,10-perylentetracarboxyldiimide (PTCDI-C7) and N,N′-diundecyl-3,4,9,10-perylentetracarboxyldiimide (PTCDI-C11) enabled obtaining photovoltaic effect when coupled with copper phthalocyanine (CuPc). The power conversion efficiency of the cells prepared from these perylenes is similar, whatever the x value. However this efficiency is smaller than the one achieved when the couple CuPc/C₆₀ (fullerene) is used. More precisely, the best efficiency was obtained when a PTBrPDSe/Au buffer layer is introduced between the ITO anode and the CuPc. It was established that the presence of the thin PTBrPDSe layer allows improving the shunt resistance and consequently the cells performance.