羧基化碳纳米管嵌入石墨修饰电极对多巴胺和抗坏血酸的电催化

采用涂层和嵌入修饰法 ,将羧基化多层碳纳米管制成两种修饰电极。以多巴胺 (DA)和抗坏血酸(AA)为模型化合物 ,研究了两种修饰电极对DA和AA共存时的电催化作用。结果表明 :嵌入的方式比涂层的方式显示了更多的优点。嵌入修饰电极不仅使峰电流增加 ,并且使两者共存时的氧化峰位分离达 16 0mV ,同时 ,该电极对DA的响应灵敏于AA ,这有利于在大量的AA存在下实现对DA的测定。在 1× 10 - 3 mol/L的AA的存在下 ,还原电流的一阶导数与DA浓度在 5× 10 - 7～ 1× 10 - 4 mol/L范围内呈良好的线性关系 ;检测下限达 1× 10 - 7mol L。     

硅钼杂多阴离子薄膜修饰电极的研究和应用——线性扫描伏安法测定水中可溶性硅酸盐

本文研究了以玻碳电极为基体的1:12硅钼杂多酸根(SiMo_(12)O_(40)~(4-)简称12-MSA)修饰电极的制备及其电化学行为,将12-MSA电极应用于线性扫描伏安法测定天然水中可溶性硅酸盐,结果满意.硅浓度在8.0×10~(-7)～1.7×10~(-3)mol/L,相对标准偏差(n=7)为1.85％,加标回收率为98.2％～103.6％,SiMo_(12)电极具有优良的选择性和稳定性。     

金在脱乙酰壳多糖化学修饰电极上的电化学行为及分析应用

用脱乙酰壳多糖化学修饰电极为工作电极，阳极溶出伏安法测定痕量金。在ｐＨ１～２的ＫＣｌ－ＨＣｌ底液中，起始电位０．２０Ｖ，终止电位１．３０Ｖ，富集时间５ｍｉｎ，以０．１Ｖ／ｓ扫速阳极溶出，峰电位在１．００Ｖ（ｖｓ．ＳＣＥ），Ａｕ（Ⅲ）浓度在０．１０ｍｇ／Ｌ～１０ｍｇ／Ｌ范围内与峰高呈线性关系。在富集１０ｍｉｎ时，可检测０．０２５ｍｇ／ＬＡｕ，大大提高了测定灵敏度，用于矿样测定，无需分离，结果满意。用紫外光谱和拉曼光谱研究了该法的电极过程机理。     

抗癌药物的电化学研究(Ⅱ)道诺霉素在DNA修饰石墨粉末微电极上的电化学行为及分析应用

研究了道诺霉素 ( DNM)在石墨粉末微电极和 DNA修饰石墨粉末微电极上的电化学行为 ,并分析了产生差别的原因。在此基础上 ,提出了测定微量 DNM的方法 ,DNM浓度在 1 .0× 1 0 - 7～ 1 .0× 1 0 - 5mol/L之间其微分脉冲伏安 ( DPV)峰电流与浓度有良好的线性关系 ,检出限为 5 .0× 1 0 - 8mol/L。采用标准加入法测定了模拟样品中的 DNM,回收率在 94%～ 1 0 8%之间 ,结果令人满意     

循环流化床生物质气化炉内计算流体动力学模拟——鼓泡流化床内改进的颗粒床模型（英文）

采用改进颗粒床模型的CFD方法模拟了实验室规模冷模装置内鼓泡床的流体流动时空特性。模拟结果表明表观气速是影响气固动态特征和压力波动的主要因素之一：随表观气速的增大，气泡数目增加，气泡体积增大，压力波动增强；气速越高时均压降越大；在内循环鼓泡流化床内固体颗粒呈“单室”流型。上述与实验观察相吻合的模拟结果将有助于放大和设计商业化的内循环流化床生物质气化炉。     

纳米CoHCF修饰电极的制备及其对血红蛋白的电化学测定研究

A cobalt hexacyanoferrate （CoHCF） nanoparticle （size ca. 60 nm） chemically modified electrode （CME） was fabricated and the electrochemical behavior of hemoglobin （Hb） at this nanosized CoHCF CME was studied. In comparison with a bare glassy carbon electrode （GCE） and a general CoHCF CME electrodeposited in a traditional manner, the present nanosized CoHCF CME performed efficiently electrocatalytic reduction for Hb with relatively high sensitivity, stability, and longlife, Combined with liquid chromatography （LC）, the nanosized CoHCF CME was used as the electrochemical detector of Hb in the established flow injection analysis-electrochemical determination （FIA-ECD） system. The peak current was a linear function of concentrations in the range from 2.5×10^-8 to 5.0×10^-6mol/L for Hb, with detection limit of 1.4×10^-8 mol/L. The FIA-ECD system has been successfully applied to assess the Hb content of clinic blood samples with advantages of sensitiveness, speediness, easy control and small sample-consumption.     

铁氰化锰修饰玻碳电极的制备及其电化学性能

A thin film of manganese hexacyanoferrate （MnHCF） was electrochemically formed on a glassy carbon （GC） electrode to prepare a chemically modified electrode （CME）. The mechanism of film formation of MnHCF and its growth process were investigated in detail by cyclic voltammetry. The results show that the stoichiometric composition of MnHCF is Mn^ⅢFe^Ⅲ（CN）6, an analogue of prussian yellow. There exist three clear-cut stages in the whole modification process and the last stage is indispensable to the fabrication of homogenized, stable MnHCF film and must last for an appropriate time. The surface morphology of MnHCF/GC electrode was characterized by scanning electron microscopy （SEM）, which further verified the effective deposition of MnHCF film on GC. The kinetic constants of MnHCF/GC electrode process were also evaluated. The resulting MnHCF film modified electrode presented good stability and high electrocatalytic activity toward the oxidation of H2O2, indicating that MnHCF film possesses function of catalase and can be expected for analytical purposes.     

Catalytic Oxidation of Dimethyl Ether to Dimethoxymethane over Cs Modified HaPW12O40/SiO2 Catalysts

The attractive utilization route for one-step catalytic oxidation of dimethyl ether to dimethoxymethane was successfully carried out over the H3PW12O40（40%）/SiO2 catalyst, modified by Cs, K, Ni, and V. The Cs modification of H3PW12O40（40%）/SiO2 gave the most promising result of 20% dimethyl ether conversion and 34.8% dimethoxymethane selectivity. Dimethoxymethane could be synthe- sized via methoxy groups decomposed from dimethyl ether through the synergistic effect between the acid sites and the redox sites of Cs modified H3PW12O40（40%）/SiO2.     

pH值对聚四氨基酞菁钴膜电化学和紫外光谱性质的影响

用循环伏安法在导电玻璃(ITO)和玻碳电极(GC)上制备了聚氨基酞菁钴(CoTAPc)修饰电极(CoTAPc/GC)。探讨了pH值对CoTAPc膜的光谱和电化学性质的影响，发现其氧化还原电位与pH值有线性关系，电催化活性也随酸度的增加而增加。CoTAPc膜的紫外吸收带变化与溶液pH值及在溶液中浸泡时间有关。     

THE SOLID STATE REACTIONS AND TRANSITIONS IN HIGH POLYMERIC SYSTEMS Ⅲ. THE BULK CRYSTALLIZATION OF LANTHANIDECATALYTICALLY POLYMERIZED POLYDIENES

For the mechanism of isothermal bulk crystallization of high polymers, beside the nucleation and growth steps, the unimpingement of growing crystal aggregates should be taken into account for the modification of the Avrami equation. Starting from Poisson distribution function of growing crystal aggregates, the probability of the unimpinging ones should be P(0)+P(1), then the Q-modified Avrami equation thus derived can be expressed aswhere V0 represents the volume fraction of crystal aggregates at crystallization time t at a given temperature, while the exponent n on t relates to the mode of nucleation and growth, and K_q is the corresponding shape factor. This Q-modified one is verified satisfactory by the isothermal bulk crystallization of lanthanidecatalytically polymerized polybutadiene (Ln-PB), polyisoprene (Ln-PIR) and their copolymers (LnPB/IR). Furthermore, the proposed mechanism is well identified by the change of morphological state during the course of crystallization of the corresponding east film of Ln-PB TR (92/8) at-60°(Fig. 1).Upon examination of the influence of the number of entanglement on crystallization rate, it reveals the existence of two stages of entanglementation, the primary and the secondary ones (Fig. 19)The equation for dependence of molecular weight and entanglement on bulk crystallization rate has been derived as Eq. 13 or 18 for Ln-PB, and verified by the experimental rate data of well fractionated Ln-PB samples crystallized at -9.1 to -15℃(Fig.20).