碳纳米管修饰电极上沙丁胺醇电催化氧化研究

将多壁碳纳米管(MWNT)分散在疏水性表面活性剂双十六烷基磷酸(DHP)溶液中形成稳定、均相的分散液,然后制备多壁碳纳米管-DHP复合膜修饰玻碳电极(MWNT-DHP/GCE).应用方波伏安法研究了沙丁胺醇在修饰电极上的电化学行为,结果表明,碳纳米管复合膜修饰电极对沙丁胺醇的氧化有良好的电催化活性,其氧化反应为一电子一质子过程,氧化电位比裸玻碳电极负移40 mV,峰电流增加了4.5倍.在最佳测试条件下,氧化峰电流与沙丁胺醇浓度在8.3×10-7~3.3×10-6mol/L范围内呈良好线性关系,开路富集2min,检出限达1.8×10-7mol/L.该修饰电极具有良好的重现性、稳定性.     

聚吡咯／多壁碳纳米管修饰电极对多巴胺的测定

制备了聚吡咯/多壁碳纳米管(PPy/MWNT)复合膜修饰电极。研究了神经递质多巴胺(DA)在该修饰电极上的电化学行为。实验表明,PPy/MWNT复合膜修饰电极对DA的电催化作用优于PPy修饰电极。在pH=4.10的0.2mol/L醋酸-醋酸钠缓冲溶液中,DA在该修饰电极上的CV曲线于0.31V和0.28V处出现一对灵敏的氧化还原峰,峰电位差△Ep比裸玻碳电极降低58mV,比PPy修饰电极降低28mV,峰电流显著增加。氧化峰电流ipa与DA浓度在1.0×10-4~7.8×10-8mol/L范围内呈良好的线性关系,线性回归方程为ip(μA)=0.2512 1.2300C(×10-5mol/L),相关系数r=0.9992,检出限为3.9×10-8mol/L。常见物质对DA的检测无干扰,DA注射液样品检测回收率为94%~104%。     

Mutual solubilities of hydrocarbons and water with the CPA EoS

The knowledge of hydrocarbon/water phase equilibria is important in the design and operation of equipment for petroleum transport and refining and petrochemical plants. The presence of water in a hydrocarbon mixture can affect the product quality and damage the operation equipment due to corrosion and formation of gas hydrates. Tracing the concentration of hydrocarbons in aqueous media is also important for technical purposes like preventing oil spills and for ecological concerns such as predicting the fate of these organic pollutants in the environment.     

Effects of local thickness defects on the buckling of micro-beam

A buckling model of Timoshenko micro-beam with local thickness defects is established based on a modified gradient elasticity. By introducing the local thickness defects function of the micro-beam, the variable coe-cient differential equations of the buckling problem are obtained with the variational principle. Combining the eigensolution series of the complete micro-beam with the Galerkin method, we obtain the critical load and buckling modes of the micro-beam with defects. The results show that the depth and location of the defect are the main factors affecting the critical load, and the combined effect of boundary conditions and defects can significantly change the buckling mode of the micro-beam. The effect of defect location on buckling is related to the axial gradient of the rotation angle, and defects should be avoided at the maximum axial gradient of the rotation angle. The model and method are also applicable to the static deformation and vibration of the micro-beam.     

INVERSE OPALINE STRUCTURE TITANIA PHOTONIC CRYSTALS BY FUNCTIONALLY MODIFIED COLLOIDAL CRYSTALS TEMPLATING

Ordered macroporous titania photonic crystals （PCs） and photonic balls were fabricated by functional modified polymer colloidal crystals. The TiO2 PCs and balls formed through this method exhibit no cracks and lacunae in large areas on their surface and their inner structures.     

低浓度固液两相流的颗粒相动理学模型

用广义Fokker-Planck扩散模型描述液相湍动对颗粒的挟带作用，用修正的BGK模型描述粒间碰撞效应，建立了封闭的颗粒相PDF输运方程．运用Chapman-Enskog迭代法求得方程的二阶近似解，获得颗粒相脉动速度二阶矩和三阶矩闭合关系．模型与颗粒流模型相容，与液相湍流闭合模型是否相容依赖于扩散模型的具体形式，并据此比较了不同的涡一颗粒作用模型．模型与二维明渠流轻质沙和天然沙试验资料符合很好．表明细小粒径颗粒能够充分跟随水流运动；大粒径颗粒的相间平均速度差和壁面滑移速度明显，近壁区内的颗粒沿流向和垂向脉动强度都可能大于水流，并存在一定程度的颗粒碰撞效应．     

油酸修饰TiO2纳米微粒水溶液润滑下GCr15钢摩擦磨损性能研究

用四球摩擦磨损试验机考察了脂肪酸修饰TiO2纳米微粒水溶液润滑下GCr15钢的摩擦磨损性能,并用电子探针和X射线光电子能谱研究了钢球磨损表面边界润滑膜的化学组成和元素分布.摩擦磨损试验结果表明:脂肪酸修饰TiO2纳米微粒在水中具有较好的润滑性能、良好的极压性能及较高的承载能力.添加质量分数为0.1%～1.0%的油酸TiO2纳米微粒可使水的承载能力提高6～12倍,烧结负荷提高51～100%,抗磨减摩性能也有较大提高,卡咬负荷由150N提高至1000～1800N.磨损表面分析表明:油酸TiO2纳米微粒在较高负荷(>300N)下发生了摩擦化学反应,生成含TiO2及油酸复合物的边界润滑膜,从而起减摩抗磨作用     

芦丁在碳纳米管修饰电极上的电化学性质研究

制备了多壁碳纳米管修饰玻碳电极(MWNT/GC),并研究了芦丁在MWNT/GC上的电化学行为.研究表明,MWNT/GC对芦丁的氧化具有明显的电催化作用.用循环伏安法对芦丁浓度进行了测定,其氧化峰电流与芦丁的浓度在5.0×10-1～1.0×10-4molL-1范围内呈良好的线性关系,线性相关系数为0.9918.     

三维电阻抗成像的体积元方法的数值模拟和分析

电阻抗成像是一类椭圆方程反问题,本文在三维区域上对其进行数值模拟和分析.对于椭圆方程Neumann边值正问题,本文提出了四面体单元上的一类对称体积元格式,并证明了格式的半正定性及解的存在性;引入单元形状矩阵的概念,简化了系数矩阵的计算;提出了对电阻率进行拼接逼近的方法来降低反问题求解规模,使之与正问题的求解规模相匹配;导出了误差泛函的Jacobi矩阵的计算公式,利用体积元格式的对称性和特殊的电流基向量,将每次迭代中需要求解的正问题的个数降到最低.一系列数值实验的结果验证了数学模型的可靠性和算法的可行性.本文所提出的这些方法,已成功应用于三维电阻抗成像的实际数值模拟.     

一个2+1维变形Boussinesq方程的N孤子解

研究了一个2＋1维变形Boussinesq非线性发展方程：utt-uxx-uyy-3（u^2）xx-uxxxx=0,运用Hirota双线性方法得到它的N孤子解.