Surface Energy of Silica-TEOS-PDMS Ormosils

Inverse gas chromatography (IGC) was applied to characterize the surface energy of organically modified silicates (ormosils) by measuring the interaction of molecular organic probes with the ormosil surface. Ormosils were prepared by the sol-gel method by the reaction of TEOS (tetraethoxysilane), PDMS (polydimethylsiloxane) and different types of silica (Aerosil 130, Aerosil 200 and Aerosil 380). The isosteric heat of adsorption, q _st, and the dispersive component of the surface energy, _s ^D, were estimated by using the retention volume of different nonpolar and polar probes at infinite dilution. The dispersive component shows an increase as the specific surface area of the silica is increased from 29.6 mJ/m² to 51.4 mJ/m² at 60°C. Such values are lower than that obtained for aerosil particles meaning that PDMS chains impede the interaction with silanol groups located on the silica surface. The specific interaction parameter, I^SP, and the enthalpy of specific adsorption, H _a ^SP, of polar probes on the ormosil surface were also measured in order to obtain the acid-base character of ormosil surface. The H _a ^SP, was correlated with the donor, DN, and the acceptor, AN, numbers of the probes to quantify the acidic, K _A, and the basic, K _B, parameters of the substrate surface. The obtained results suggest that the silica particles were covered by PDMS chains in a different way depending on the type of silica used. The values of K _A and K _B suggest that the ormosil surface is amphoteric, with predominantly acceptor electron sites.     

Permselective and Preconcentration Properties of a Surfactant‐Intercalated Clay Modified Electrode

This work is focused on the voltammetric examination of the ion exchange properties of a smectite type clay, before and after its modification by the replacement of its native interlamellar cations (Na⁺, K⁺, Ca²⁺) by hexadecyltrimethylammonium cations (HDTMA⁺). The raw clay and its organically modified form were first characterized by X‐ray diffraction (XRD) and N₂ adsorption–desorption isotherms (BET method) that confirmed the modification via an intercalation process. These materials were subsequently coated onto glassy carbon surfaces, and the resulting modified electrodes were evaluated for the uptake of [Ru(NH₃)₆]³⁺ and [Fe(CN)₆]^3? ions used as redox probes. Some experimental parameters affecting the incorporation of the probes within the film, including the ionic strength, the surfactant loading and the solution pH are thoroughly examined, in order to highlight the mechanism of the process. The possibility of using the surfactant‐intercalated clay modified electrode as an electrochemical sensor for [Fe(CN)₆]^3? is also evaluated.     

Ionic liquid–modified cellulosic hydrogels for loading and sustained release of selenourea: an ensuing inhibition of tyrosinase activity

Cellulose-based hydrogel materials were prepared and modified with tannic acid and l-methionine using ionic liquid as the solvent. The gels were prepared to develop a sustained release medium for selenourea (SeU). The drug delivery characteristics of selenourea-loaded cellulose (CSeU), selenourea-loaded tannic acid-modified cellulose (CTSeU), and selenourea-loaded L-methionine-modified cellulose (CMSeU) were investigated in aqueous media and simulated gastric fluid (SGF) media. This modified gel beads have been characterized using field emission scanning electron microscope, X-ray energy-dispersive spectroscopy, Fourier transform infrared spectroscopy, thermogravimetry–differential thermal analysis and swelling properties and compared with those of the unmodified ones. We also investigated the inhibitory effects of SeU released from these gels on the activity of mushroom tyrosinase. Out of all the gel materials, CTSeU showed maximum SeU release both in water and SGF media. However, tyrosinase inhibitory action in PBS medium was comparable for all the three gel materials.     

(4,4′,4″,4″′-四硝基)·酞菁合钴(Ⅱ)化学修饰电极对抗坏血酸的电催化氧化

合成了一种钴的酞菁配合物,以玻碳为基体、用化学吸附法制备了它的化学修饰电极。用CV法研究了该化学修饰电极对抗坏血酸氧化的电催化作用。结果表明,该化学修饰电极对抗坏血酸的氧化有一定的电催化作用,且电催化活性的稳定性高,抗坏血酸的电催化氧化峰电流和其浓度之间有良好的线性关系。     

Unusual peak defocusing in capillary GC on hexakis(2,6-diO-pentyl-3-O-acetyl)-α-cyclodextrin stationary phase

An unusual peak defocusing effect influencing chromatographic performance over a limited range of elution temperatures is described for hexakis(2,6-di-O-pentyl-3-O-acetyl)-α-cyclodextrin stationary phase. Since this phenomenon is likely to be dependent on minor details of the cyclodextrin molecule, full assignment of the ¹H- and ¹³C-NMR-spectra are given.     

PtCl_6~(2-)接着PVP修饰电极及其对Fe~(2-)的催化氧化

研究了接着ＰＶＰ修饰电极及其催化动力学，用循环伏安法考察了电极的电化学性质，结果表明在酸性溶液中对Ｆｅ￣（２＋）的氧化有显著的催化作用，采用旋转圆盘电极法、极化曲线法等就电极对Ｆｅ￣（２＋）氧化催化过程的控制步骤及有关动力学参数进行了测定。     

磺胺甲恶唑在二硫化钼纳米片修饰电极上的电化学行为

采用了研磨后超声和离心分离方法制备了二硫化钼纳米片,通过原子力显微镜(AFM)和扫描电子显微镜(SEM)对不同离心速度分离的二硫化钼纳米片进行了表征。使用循环伏安法(CV)和差分脉冲伏安法(DPV)在磺胺甲恶唑溶液中对二硫化钼纳米片修饰的玻碳电极进行了电化学行为研究。结果显示,磺胺甲恶唑在二硫化钼修饰电极的循环伏安图上有一对氧化还原峰。其峰电流值与扫描速度的平方根成正比,是扩散控制过程。DPV扫描结果显示,磺胺甲恶唑的峰电流与其浓度之间存在着明显的线性关系。研磨超声方法制备出的二硫化钼纳米片层材料在电极上能够加速电子的转移和传输,从而有效提高峰电流值,为进一步研制准确测定磺胺甲恶唑电化学传感器提供了一种可选择的材料和电化学分析方法。     

First access to the spin-labelled β-amino acid POAC in an enantiopure state by resolution through its binaphthyl esters

Resolution of trans 3-(9-fluorenylmethyloxycarbonylamino)-1-oxyl-2,2,5,5-tetramethylpyrrolidine-4-carboxylic acid (Fmoc-POAC-OH) was quickly achieved upon esterification with (aR)-1,1′-binaphthyl-2,2′-diol, chromatographic separation of the obtained diastereomers, and facile saponification of the aryl ester function with removal of the chiral auxiliary.     

Voltammetric Behavior of the Alizarin Red S Interaction with DNA and Damage to DNA

The electrochemical behavior and the interaction of alizarin red S (ARS) with calf thymus DNA was investigated on a bare glassy carbon electrode (GCE) and DNA modified GCE (DNA/GCE), respectively. ARS showed a pair of redox peaks at ?0.445 V and ?0.414 V on a bare GCE. On addition of DNA into the ARS solution, the peak current of ARS decreased and the peak potential positively shifted, but without new redox peaks appeared. The ARS reduction peak current increased with immersion time on a DNA/GCE. The results showed that ARS could interact with DNA molecules by intercalative binding mode. The equilibrium constant, binding number and the ratio of binding constant for oxidized and reduced ARS forms were obtained. The DNA damage was directly detected by appearance of guanosine and adenosine bases oxidation signal. The influence of experimental conditions on DNA damage extent was discussed in detail.     

Ion Recognition and Analytical Application of a Fibroin Modified Electrode

A novel fibroin modified electrode with ion recognition was reported. The membrane with isoelectric point of pH 4.5, was modified on graphite and carbon fiber electrodes. The pH-responsive ion recognition of the modified electrode was investigated by use of some neurocompounds. The fibroin carbon fiber electrode has been used for in-vivo determination.