临近铁路深基坑开挖防护技术

考虑到周边建筑物安全及在动荷载下施工人员和机械设备的安全,选择了防护桩方案并进行了设计及计算,为临近铁路深基坑施工提供了参考。     

大台井"川法"密集柱支撑力分析

从单体液压支柱的特性出发，结合大台井实际的煤层和顶板条件，计算了俯伪斜走向分段密集采煤法密集柱的支撑力。影响密集柱支撑力的相关参数主要有煤层厚度与倾角、采深、控顶距等。密集柱支撑力的大小随煤层厚度增加而增大，顶板压力主要由密集柱承担；随煤层倾角的增大而减小；随采深增加而线性增大，深部开采时应考虑适当增加支护强度；随控顶距增大而增加，但增加幅度较小。所得到的结论为大台井“川法”采煤的实施提供了理论依据。     

Metal complexation of crosslinked polyacrylamide-supported dithiocarbamates: Effect of the molecular character and extent of crosslinking on complexation

Dithiocarbamate functions were incorporated into different polyacrylamide matrices crosslinked with a flexible and hydrophilic crosslinking agent, tetraethyleneglycol diacrylate (TEGDA), and their complexation behaviours were investigated. Crosslinked polyacrylamides with varying extents of the tetrafunctional TEGDA crosslinks were prepared by free radical solution polymerization at 60°C using potassium persulphate as initiator in ethanol. The dithiocarbamate functionality was incorporated into these polyacrylamides by a two-step polymer-analogous reaction involving (i)trans-amidation with ethylenediamine and (ii) dithiocarbamylation of the aminopolyacrylamide with carbon disulphide and alkali. The complexations of dithiocarbamate with Cu(II), Ni(II), Zn(II), Co(II) and Hg(II) ions were followed under different conditions. The metal ion intake varied with the extent of the crosslinking agent and the observed trend in complexation is Hg(II) > Cu(II)> Zn(II)> Co(II)> Ni (II). The time-course of complexation, the possibility of recycling, swelling characteristics, and spectral and thermal analyses were carried out. The thermal stability increases upon complexation with metal ions.     

利用现浇支架法施工预应力混凝土刚构桥技术

结合二跨津塘公路刚构桥施工实例，详细介绍了采用满堂支架现浇法施工预应力混凝土刚构桥的技术、主要施工步骤和施工注意事项，指出其最大特点是改传统的利用挂篮进行悬壁浇注施工为满堂支架现浇法施工，是一种经济安全的施工方法。     

统计模式识别的研究

模式识别的基本目标就是在有监督和无监督的情况下进行分类,在模式识别的各种模型中,基于统计的方法已经被广泛的研究并应用于实际.一些新的技术和方法的引入（神经网络和支持向量机方法）也促进了该领域发展,文章研究了基于统计的模式识别的进展情况,给出了模式识别的概念、原理、方法并对各种方法进行了相关的评述.     

New reals: Can live with them,can live without them

We give a self‐contained proof of the preservation theorem for proper countable support iterations known as “tools‐preservation”, “Case A” or “first preservation theorem” in the literature. We do not assume that the forcings add reals. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

阴极支撑型固体氧化物燃料电池的制备与测试

采用固相反应法合成A缺位的(La_0.8Sr_0.2)_0.95MnO₃(LSM95)作为阴极材料,Zr_0.9Sc_0.1SO_1.95(SSZ)商业粉体作为电解质材料,溶胶-凝胶法合成的La_0.8Sr_0.2Cr_0.5Mn_0.5O₃-(LSCrM)作为阳极电催化材料,利用流延、共烧结及浸渍法得到结构为LSCrM-CeO₂|SSZ|3YSZ-LSM95的阴极支撑型固体氧化物燃料电池,分别在氢气气氛和甲烷气氛中进行电化学性能测试. 结果表明,浸渍0.11 g·cm ^-2 CeO₂的LSCrM-CeO₂|SSZ|3YSZ-LSM95单电池在以CH₄为燃料时,600、650、700、750和800 ^oC下的功率密度分别为1.68、4.70、12.40、28.08和54.78 mW·cm ^-2,表现出一定的电化学性能和较好的稳定性.     

Temperature programmed reduction of silica supported nickel catalysts

Nickel oxide promoted catalysts are prepared by simple precipitation, precipitation from homogeneous solution and impregnation methods and their reduction behavior is monitored with temperature programmed reduction (TPR) technique. The effect of different parameters such as metal loading, method of preparation and heat treatment temperature are also observed on the reducibility of the catalysts. It is observed that reduction temperature increases with the increase of calcination temperature. Results indicate that the interactions between nickel oxide and silica begin with the increase of calcination temperature which leads to the formation of nickel hydrosilicates and are responsible for high temperature reduction peaks.     

以有机镍配合物为前体制备担载镍催化剂的研究

描述了以镍单核配合物ＮｉＣｐ２和簇合物Ｎｉ３Ｃｐ３Ｎ－ｔ－Ｃ４Ｈ９为前体的ＳｉＯ２载镍催化剂的制备，通过元素分析、ＴＲＲ、ＴＰＤＥ、ＸＰＳ，ＣＯ吸附和苯加氢反应对以镍配合物和簇合物为前体制备的催化剂的性能及其制备过程了研究和表征。结果表明，镍与合物和簇合物在担载过程中同载体ＳｉＯ２表面发生了相互作用，其化学组成发生了变化，在苯加氢反应中，此催化剂的活性比以Ｎｉ（ＮＯ３）２为前体制备的催化剂高得多，