Spherical coordinate representations of solvent composition for liquid chromatography method development using experimental design

One of the major techniques used for the method development of ternary and quaternary high performance liquid chromatography (HPLC) systems has been to use mixture designs, often referred to as "Glajch's Triangle". This technique does not allow for the systematic and simultaneous optimization of other factors such as gradient time, pH and temperature that affect the quality of separations. An alternative approach is to use experimental designs. The condition, however, that the composition of all components of the mobile phase must total 100% presents a problem when trying to mathematically represent ranges of each mobile phase constituent of a ternary or quaternary system. A method is described here, based on spherical coordinate representations, that adheres to the constraints of the mobile phase composition and allows experimental designs, such as central composite and factorial designs, to be applied to the simultaneous optimization of the mobile phase composition. Other factors, in particular temperature and gradient time, can then be included in the design. As a result of applying these designs to the HPLC separation of phenols and corticosteroids, it was found necessary to include three-way interactions between experimental factors in the model. The significance of these interactions shows that they need to be considered in HPLC method development.     

Hydride generation atomic fluorescence spectrometric determination of As, Bi, Sb, Se(IV) and Te(IV) in aqua regia extracts from atmospheric particulate matter using multivariate optimization

A highly sensitive and simple method, based on hydride generation and atomic fluorescence detection, has been developed for the determination of As, Bi, Sb, Se(IV) and Te(IV) in aqua regia extracts from atmospheric particulate matter samples. Atmospheric particulates matter was collected on glass fiber filters using a medium volume sampler (PM1 particulate matter). Two-level factorial designs have been used to optimise the hydride generation atomic fluorescence spectrometry (HG-AFS) procedure. The effects of several parameters affecting the hydride generation efficiency (hydrochloric acid, sodium tetrahydroborate and potassium iodide concentrations and flow rates) have been evaluated using a Plackett-Burman experimental design. In addition, parameters affecting the hydride measurement (delay, analysis and memory times) have been also investigated. The significant parameters obtained (sodium tetrahydroborate concentration, sodium tetrahydroborate flow rate and analysis time for As; hydrochloric acid concentration and sodium tetrahydroborate flow rate for Se(IV); and sodium tetrahydroborate concentration and sodium tetrahydroborate flow rate for Te(IV)) have been optimized by using 2ⁿ + star central composite design. Hydrochloric acid concentration and sodium tetrahydroborate flow rate were the significant parameters obtained for Sb and Bi determination, respectively. Using a univariate approach these parameters were optimized. The accuracy of methods have been verified by using several certified reference materials: SRM 1648 (urban particulate matter) and SRM 1649a (urban dust). Detection limits in the range of 6 × 10⁻³ to 0.2 ng m⁻³ have been achieved. The developed methods were applied to several atmospheric particulate matter samples corresponding to A Coruña city (NW Spain).     

Properties of block and graft copolymers of polybutadiene with small complexed poly(4-vinylpyridine) segments

Various diblocks, triblocks and a graft copolymer of butadiene with 4-vinylpyridine short blocks have been prepared. They were complexed with ZnCl₂ to give ionomer-like materials. For all copolymers, the T_g of the elastomeric block (?84°C to ?91°C) was unchanged by complexation. For all diblocks and triblocks with short blocks (DP _n ～ 3) the storage modulus was only slightly increased by comparison with uncomplexed materials. For the graft copolymer even with short blocks the material is less sensitive to temperature after complexation. For triblocks, when the DP _n of the vinylpyridine blocks was high enough (15 units), complexes were associated in multiplets of large size and the elastomeric properties were retained up to 200°C.     

Optimization of a nitrogen analyser based on the Dumas method

The objectives of this work was to obtain a total nitrogen concentration in milk with the Dumas method for industrial and research applications. This method was faster than the Kjheldal method (5 min against 2 h or 3 h) but less precise. A three factor experimental design was performed to optimize the instrument, a FP-2000 supplied by LECO. The first interpretation of the experimental design was disappointing and no conclusion could be done. It was not a failure of experimental design but a lack of thinking on the physical and chemical aspect of the problem. Selection and construction of composite responses based on chemical and physical consideration were the keys to optimize the Dumas method. This method is now as precise as the Kjheldal method, but considerably faster.     

荧光探针法研究PEO-PPO嵌段共聚物胶束的特性

利用十六烷基罗丹明Ｂ作为主要荧光探针，研究了水溶性嵌段共聚物Ｐｌｕｒｏｎｉｃ Ｆ－６８在水溶液中的胶束化行为，研究表明，Ｐｌｕｒｏｎｉｃ－Ｆ－６８形成胶束的监界胶束浓度与温度有极大关系，随温度的升高，其ＣＭＣ值急剧下降，并且温度对胶束的性质也有很大，影响温度升高可导致胶束的微观粘度增大，表现出很强的负粘－温效应，并发现引起这种负粘－温效应的主要原因是Ｐｌｕｒｏｎｉｃ Ｆ－６８分子中聚环氧乙烷（ＰＥ     

SBS与甲基丙烯酸丁酯本体接枝反应的研究

本文研究了以过氧化苯甲酰(BPO)为引发剂,甲基丙烯酸丁酯(BMA)既作溶剂又作为单体与苯乙烯-丁二烯嵌段共聚物(SBS)进行接枝共聚反应。用红外光谱、核磁共振谱及透射电镜表征了接枝共聚物(SBS-g-BMA)的组成及结构,讨论了时间、温度及SBS和BPO的用量对接枝的影响。     

Preparation of block copolymer vesicles in solution

Block copolymer vesicles can be prepared in solution from a variety of different amphiphilic systems. Polystyrene‐block‐poly(acrylic acid), polystyrene‐block‐poly(ethylene oxide), and many other block copolymer systems can produce vesicles of a wide range of sizes; those in the range of 100–1000 nm have been explored extensively. Different factors, such as the absolute and relative block lengths, the presence of additives (ions, homopolymers, and surfactants), the water content in the solvent mixture, the nature and composition of the solvent, the temperature, and the polydispersity of the hydrophilic block, provide control over the types of vesicles produced. Their high stability, resistance to many external stimuli, and ability to package both hydrophilic and hydrophobic compounds make them excellent candidates for use in the medical, pharmaceutical, and environmental fields. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 923–938, 2004     

苯乙烯-异戊二烯两嵌段共聚物溶液的dn/dc和紫外吸收光谱

本文研究了苯乙烯-异戊二烯两嵌段共聚物在CHCl_3中的折光指数浓度增量(dn/dc)和紫外吸收光谱。嵌段共聚物dn/dc具有很好的加和性,可以测定嵌段共聚物的组成。紫外吸收光谱的结果表明,除低苯乙烯含量的样品外,其它嵌段共聚物都显示明显的紫外增色性(UV hyperchromism)。因此UV和UV-RI双检测GPC不会得到可靠的嵌段共聚物组成数据。这种增色现象与其特征的紫外吸收谱图紧密关联     

Surface composition and property of film prepared with aqueous dispersion of polyurethaneurea-acrylate including fluorinated block copolymer

The aqueous dispersion of polyurethaneurea-acrylate (PUA) including small amount of fluorinated block copolymers containing carboxyl groups (PATF), which can be dissolved in water, was used to make films and the surface properties of these films were examined. The experimental data show that the modified PUA film exhibits a hydrophobic surface property, although the original surface of PUA film is hydrophilic. The surface composition of the modified PUA film was measured by ATR and XPS. The results indicate that there is a concentration gradient of the fluorine groups along the lines of thickness of the modified film and towards the outmost surface layer, resulting from the migration of fluorinated blocks to the air side surface of the modified PUA film during the film formation process. However, the PUA film can not be modified effectively by adding the sodium salt of PATF, since the urethane groups in the system are easy to occupy on the surface of the film.     

Solid state extrusion of thermoplastic elastomers 4

A solid state extrusion technique is applied as to produce oriented block copoly(ether ester) under various physical conditions. The morphology of the extruded samples is characterized in relation to the extrusion parameters and hard segment compositions of the polymer, using thermal analysis and X-ray methods. The lateral dimensions of the crystalline domains are found to be approximately 150 Å depending on the extrusion conditions. The statistics of the long range periodicity of the structure along the extrusion direction is in agreement with a one-dimensional two phase model, the crystalline portion of which does not vary much in thickness (35 – 45 Å). The unexpected increase in the long period and the thermal shrinkage suggest the existence of strained interlamellar amorphous chains (tie molecules). The observed variations in tensile properties are interpreted under the assumption that both the number of such tie molecules and their fully extended lengths are determined by the hard segment composition and the extrusion conditions. It is also argued that the increase in the glass transition temperature is not only a function of the composition of hard segments in the amorphous phase but also of the number of strained tie molecules.Herrn Dr. Dr. h. c. H. Hellmann zum 70. Geburtstag gewidmet.Part 3 cf. lit [11]