触头用银合金粉末的氧化性能和氧化后的组织结构

通过热重实验和扫描电子显微等方法，研究了４种触头用银合金粉末的氧化性能及氧化后的组织结构。发现Ａｇ－Ｓｎ－ＲＥ合金粉末氧化以后，在粉末表层形成一层纯银层，其组织结构理想；它的氧化性能最好，适于制备触头材料。Ａｇ－Ｓｎ－ＲＥ合金粉末的优良氧化性能与其氧化后理想的组织结构有关。稀土元素可以降低合金粉末的氧化温度，其它影响作用有待于进一步研究。     

A study of the formation of silica-supported mixed magnesium-manganese spinel oxides from multicomponent gels

The effects of thermal treatment on composite materials prepared by the gelation of sols comprising large concentrations of metal oxide precursor salts have been investigated, in order to determine the compositional and thermal requirements for forming spinel magnesium manganates in such systems. The preparative technique has been found to give rise to derived gel materials in which the metal oxide phase, in the form of regular spherical particles, is dispersed throughout a continuous silica matrix. Silica-supported mixed magnesium and manganese spinel oxide phases were obtained for systems comprising at least 30 wt% metal nitrate after heating to temperatures between 700 and 850°C, but not without concomitant formation of Mn₂O₃ and modification of the silica network by magnesium.     

Organic phase conversion of bulk (wurtzite) ZnO to nanophase (wurtzite and zinc blende) ZnO

We describe the all-organic phase conversion of bulk commercial ZnO in the wurtzite modification to sub-30 nm ZnO that we find to be partially in the zinc blende [, a=4.568(3) Å] modification. The conversion involves refluxing ZnO in 2,4-pentanedione (acetylacetone) at 413 K to form the zinc 2,4-pentanedionate, which is decomposed by heating at 573 K in an appropriate high-temperature solvent such as dibenzylether to form nanophase ZnO. This nanophase, partially zinc blende ZnO can also be obtained in a single step by heating commercial zinc 2,4-pentanedionate in refluxing dibenzylether. Thermodiffractometry suggests that the conversion of zinc blende ZnO to wurtzite ZnO commences near 650 K.     

Effect of Enzyme Modification of Corn Grits on their Properties as an Adsorbent in a Skarstrom Pressure Swing Cycle Dryer

Corn grits have been tested as a desiccant in a pressure swing adsorption (PSA) system to produce dry air. Two sizes of unmodified corn grits were tested in the PSA system: 2.16 and 0.978 mm in diameter, which dried moist air to dew points of –42°C and –69°C, respectively. A modification technology has been developed for the corn grits that gives an increase in the operational adsorptive capacity in a pressure swing adsorption system, so that they remove as much moisture from air as molecular sieves at the same conditions. After modification, 2.16 mm corn grits dry moist air to a –56°C dew point and the 0.978 mm corn grits dry air to a –80°C dew point. The modification process creates surface modifications on the corn grits apparently making more adsorption sites easily available. The modification procedure increases the specific surface area of the grits and possibly decreases the crystallinity, which would make more hydroxyl groups available for adsorption of water. Possible applications of using corn grits in the pressure swing adsorption system include industrial gas dryers, sorptive cooling air conditioners, and recycling equipment for industrial solvents.     

Linked crystallites in the conducting topmost layer of polymer bilayer films controlled by temperature: from micro- to nanocrystallites.

Temperature has great impact on the structure and size of the linked crystallites of the conducting topmost layer formed at the surface of a polycarbonate film via the reaction BEDT-TTF+IBr [BEDT-TTF=bis(ethylenedithio)tetrathiafulvalene]. We show that fine temperature control permits formation of a semiconducting topmost layer of alpha'-(BEDT-TTF)(2)(I(x)Br(1-x))(3) crystallites with either micro- or nanometre size, a result that opens a route to miniaturized conducting plastic materials.     

新型陶瓷材料的光激励发光性质研究

针对以往电子俘获光存储材料存在的问题，利用高温固相反应发制备了一种Eu^2 掺杂的氟氧化物玻璃陶瓷，研究表明在该材料中具有光激励发光(PSL)特性，并可用于电子俘获光存储。XRD分析表明该材料含有大量的BaF2微晶。根据其与BaF2相似的发光特性，推断玻璃陶瓷的PSL有可能来源于微晶中Eu^2 的5d-4f发射。但是决定光激励发光过程中的电子(空穴)陷阱的存在方式、电子迁移途径都有待进一步探讨的问题。与传统的BaFCl：Eu相比，这种材料的光激励发光衰减速度较慢。     

溶胶-凝胶法合成纳米铬酸锶镧的工艺研究

以硝酸镧、硝酸铬、硝酸锶为原料，乙二醇为分散剂，柠檬酸为胶溶剂，用溶胶-凝胶法合成纳米级的铬酸锶镧粉体。利用TG，DSC，XRD分析研究了粉料的晶化过程。利用HREM分析了煅烧温度、含锶量对粉料粒径的影响。研究表明，获得纳米晶的最佳烧结温度在800℃。随着锶掺杂量的增加，粉料的粒径逐渐变小。     

纳米晶复合Nd2Fe14B/α-Fe合金制备与磁性能的研究

采用熔体快淬及晶化处理工艺制备Nd11Fe71Co8V1.5Cr1B7.5纳米晶合金。经21m·s-1快淬及640℃ 4min晶化处理后,制成的粘结磁体的磁性能最佳,为:Br=0.64T,JHc=903.5kA·m-1,(BH)max=71kJ·m-3。添加Cr元素可提高内禀矫顽力,从而提高最大磁能积。